Mivec Club

[zul218]

hi to all sifus and mivec owner,

do u all know what is bar setting when replacing Jun T2 cam? my mechanic just replaced Jun T2 cam. engine can start but valve bar made a lousy sound. the gap is very2 big to cam. then my mechanic reset back valve bar, int 15 n ext 20. the sound disappear but engine cannot start. the engine will start if give more fuel. in bahasa tarik skit la cable throttle tu. so anyone can help me?

TQ

 

[soonhongauto]

Brand New DENSO Iridium with Gapping Offer + Free Gifts Promo
IK/Q/W16/20 @ RM 180/4pcs
IK/Q/W22/24, IKH/IT16/20L@ RM 190/4pcs

Free Gifts includes:
1) Iridium Plug gapping from 1.1mm to 0.8mm (worth RM 40/set)
2) 1 x Limited Iridium Hp Strap (Worth RM 25/pc)
3) 3 x Iridium Stickers (Worth RM 12)

Benefits of Gapping to 0.8mm:
http://www.globaldenso.com/PLUG/catalog/t-manual/pdf/P052.pdf

For more info, pls surf to:
http://www.zerotohundred.com/newforums/engine-and-performance/172852-denso-iridium-power-with-gapping-free-gift-promotion.html

As long as IK/KH/Q/W/T16/20L (Original 1.1mm) once is gapped to 0.8mm => more power and performance can be expected (immediate effect after installed).

Measurement of plug gapping to 0.8mm will be shown to buyer during order collection.

 

[kevinn7]

bila tt again la...

 

[skywalker.campro]

hello guys..
i'm a newbie here.. currently driving waja with CJ4A Mivec inside..
locatin in shah alam.. hopefully can make as much friends and sharing knowledge here.. thanks..

 

[skywalker.campro]

what happened to this club?? not active anymore?? so sad laa like this..what if somebody organize a TT, then we all can gather...hehe

 

[heavyfoot]

hello guys..
i'm a newbie here.. currently driving waja with CJ4A Mivec inside..
locatin in shah alam.. hopefully can make as much friends and sharing knowledge here.. thanks..

Hehe same here...

 

[sreshtapatil]

any idea where i can find pistons anywhere in the world for 4g92.. dohc mivec.. please help..

 

[bride1987]

bro... my fren is using 4g92 mivec now.... he's planning to change to 4g93 block... i wanna ask can the mivec piston be used in the 4g93 block? and wat else need to mod to change the block.... thanks to all mivec bros.... :)

 

[popout]

wat is the diffrent btw 4g92 DOHC non-mivec and mivec piston??

 

[skywalker.campro]

mivec piston gives more higher compression.. thus resulted your car faster response / pick up..

 

[popout]

Anyone can advise me plz my mivec auto pickup worst than a 1.3 wira why .......my engine sound smooth during during normal drive but when above 5k the mivec activated and car still feel under power. same as my previous engine 1.5 auto sifu help me plz

 

[GTR]

problem

i think ur MIVEC did no operate. whats the maximum RPM can achive now?

 

[popout]

my mivec sure engage when above 5k rpm the sound change but feel no power too , by the way my paiping is stock which is 1.5 one , is the painping cause such low power??

 

[LSLMIVEC]

hi all newbie here. just wanna ask anyone here can quote me price for timing belt kit set for mivec(include timing belt, bearing & other part needed)

 

[soonhongauto]

Brand New DENSO Iridium with Gapping Offer + Free Gifts Promo

IK/Q/W16/20 @ RM 180/4pcs
IK/Q/W22/24, IKH/IT16/20L@ RM 190/4pcs

Free Gifts includes:
1) Iridium Plug gapping from 1.1mm to 0.8mm (worth RM 40/set)
2) 1 x Limited Iridium Hp Strap (Worth RM 25/pc)
3) 3 x Iridium Stickers (Worth RM 12)

Benefits of Gapping to 0.8mm:
http://www.globaldenso.com/PLUG/cata...l/pdf/P052.pdf

For more info, pls surf to:
http://www.zerotohundred.com/newforums/engine-and-performance/172852-denso-iridium-power-with-gapping-free-gift-promotion.html

As long as IK/KH/Q/W/T16/20L (Original Gap from Factory 1.1mm) once is gapped to 0.8mm => more power and performance can be immediately felt after installed.

Measure of plug gapping to 0.8mm will be shown to buyer during order collection.

 

[ykyong]

bride1987,
mivec 4g92 can change 4g93 block, but u better use 1.6 single cam piston to fit in...it more powerful..but 1 thing ...u have to oversize ur block 1mm then only u can fix the 1.6 piston. and ur mivec will become 1.9cc.

 

[stevie_lai]

hey all mivec sifu, can i ask u a question, is it RSM can operate the mivec? because i own a mivec turbo engine with 4g93t, my RSM get stolen, so is it MIVEC not operate now?i also using e-manage, i think e-manage can not operate mivec right? kindly give me advice~thanks

 

[(ADVAN)]

juz buy another rsm to activate back ur mivec..e-manage cant activate mivec except v-manage..

 

[stevie_lai]

oh???RSM really can??? i thought V-AFC, vtec controller just can active.......thanks ya~

 

[stevie_lai]

V-manage not really common in malaysia i think.....so i scare setting problem....