Add turbo kit on 4g13p

nitrus

2,000 RPM
Senior Member
Nov 14, 2005
2,895
35
1,648
gohkokeng said:
how power? can win Satria GTi or not?
i doubt it ..

or can it?

Edit : or maybe if it's done up with full exhaust mod n bla bla mods , then maybe can beat GTi la .. but with that money, i rather change engine n service it fully ady. ..
 
Last edited:

nitrus

2,000 RPM
Senior Member
Nov 14, 2005
2,895
35
1,648
fstrader said:
end of da day, "displacement kenot replace "wat word is that ar?" :p
no worry unker fred *cough* .. i help u ... u sit down drink coffee n read newspaper first!

ahem!

"displacement kenot replace replacement, kenot replace tires, n drifting kenot replace old age, and old age kenot replace unker fred and unker fred kenot replace weber and weber cannot replace turbo n ....." er.... wat i toking ar...? :hmmmm: oh yes... turbo kenot place-in 4G13 *cough* :mouth_closed: ... no wait, can ma ..... :biggrin: :biggrin: :biggrin:

kidding only la ... but good la billy_t actually trying to install a turbo into the 4G13, better then those ppl who juz put the electronic blow off sound... :emoticon_U: i juz hope the bolt-on turbo to ur 4g13 is reliable dude..! all d best...
 

hornydrifter

500 RPM
Senior Member
Mar 27, 2005
837
90
3,028
KEY EL!
dunla discourage ppl...at least he tried to do sumting different...billy i saport u!! but ahh..manifold too long la dey:emoticon_U:
 

fstr

7,000 RPM
Helmet Clan
Senior Member
Apr 19, 2004
7,935
954
3,213
Sahara Desert
nitrus said:
no worry unker fred *cough* .. i help u ... u sit down drink coffee n read newspaper first!

ahem!

"displacement kenot replace replacement, kenot replace tires, n drifting kenot replace old age, and old age kenot replace unker fred and unker fred kenot replace weber and weber cannot replace turbo n ....." er.... wat i toking ar...? :hmmmm: oh yes... turbo kenot place-in 4G13 *cough* :mouth_closed: ... no wait, can ma ..... :biggrin: :biggrin: :biggrin:

kidding only la ... but good la billy_t actually trying to install a turbo into the 4G13, better then those ppl who juz put the electronic blow off sound... :emoticon_U: i juz hope the bolt-on turbo to ur 4g13 is reliable dude..! all d best...


mauahhahahahahaaaa kanasai lu :p
 

nitrus

2,000 RPM
Senior Member
Nov 14, 2005
2,895
35
1,648
gohkokeng said:
sini say support.......sana terus complain......
must support n complain ma, best of both worlds ma... wahahahahahahaaa!! :rofl:


fred , wat kanasai ??? wo pu zhir dao ni gong mat yea!!!! hahaaa :angel_smile:
 

V8_nutter

500 RPM
Senior Member
Aug 5, 2004
516
2
3,018
Give face to him larr, dun worry billy_t you got problems we willing to help. I know you sure got problem wan,..... Jk jk...
 

billy_t

Active Member
Senior Member
Thread starter
Apr 7, 2006
35
0
1,506
lol..its ok from me..i just want to share with yours only what i did..all the piping already finish today.just the water pipe and oil pipe to the turbin not yet install..here have some pic..kekeke....
 

billy_t

Active Member
Senior Member
Thread starter
Apr 7, 2006
35
0
1,506
just install the gsr ori intercooler at afternoon..then now wanna install the gsr blow off..
 

nitrus

2,000 RPM
Senior Member
Nov 14, 2005
2,895
35
1,648
billy_t , go read the TechTalk segment in this month's Hypertune... in the 2nd letter, someone was asking about bolting on a turbo to his 1.5l megavalve ... u see la wat was the reply... :biggrin: 1.5l also couldnt handle well, wat more can the 1.3 do ? haih..
unless ur fren is a "experienced n knowledgeble" mechanic like wat the reply from the editor was talking about, hahaaha..
 

hayabuza

1,000 RPM
Senior Member
Jul 22, 2005
1,404
2
1,638
Klang
Bro...i doubt ur engine will last long...it's a bit of suicide mods u got there. For 10 cars that have done a turbo kit upgrade on stock engine only 1-2 will suceed. But if ur project works well, we all here are proud that u didnt listen to us and carry out ur project...:_:
 

blur_civic

500 RPM
Senior Member
Oct 8, 2004
777
0
3,016
KL/PJ
Honestly speaking... U guys remind me of old uncles who wont dare to try anything.. what happen to innovation in mechanics? So discouraging.. "Sure this problem, Sure that problem.." at least billy is trying out something new.. Even if you are giving some proper advice.. at least try to be less discouraging.. give billy some credit guys..

The Editor in hypertune was talking about CARB BOT... billy is doing BOT on an EFI.. the difference is BIG..

And Kancil Turbo is NOT slow..

Dont mean to offend anyone directly... just wanted to vent a little...
 

SkYwAlKeR

Over 10,000 RPM!
Senior Member
Mar 12, 2005
10,139
300
5,183
ePoh ~ malacca
Visit site
haha... yah yah, if u got the money to play with, no harm going for 4g13 BOT... but in a consumer point of view, we usually wont wanna dump money into the sea...

yeah, u guys should encourage him to spend his money and see what's the feedback... good or bad, his problem ma...
 

nitrus

2,000 RPM
Senior Member
Nov 14, 2005
2,895
35
1,648
SkYwAlKeR said:
haha... yah yah, if u got the money to play with, no harm going for 4g13 BOT... but in a consumer point of view, we usually wont wanna dump money into the sea...

yeah, u guys should encourage him to spend his money and see what's the feedback... good or bad, his problem ma...
yeah, totally... so, umm..... I support him to his own problem! :biggrin: er... wait, i think sumthin wrong with my sentence.. errr... :shcokedcamo:
 

gohkokeng

2,000 RPM
Senior Member
Feb 21, 2006
2,443
4
1,638
y stock engine cannot taruh turbo?

engine cannot tahan ah?

or just proton stock engine cannot tahan turbo only?

how about if Honda stock engine? can taruh turbo?
 

SkYwAlKeR

Over 10,000 RPM!
Senior Member
Mar 12, 2005
10,139
300
5,183
ePoh ~ malacca
Visit site
any engine also can taruk turbo... jz that u cannot boost it high because the internal parts arent strong enough... same case goes for honda engine...

thats why BOT is expensive coz need to replace the internal parts with forged components... the amount spent to rebuild the engine with forged item is enough for u to get a proper turbo engine....

correct me if wrong...
 

theorekz

500 RPM
Senior Member
Mar 29, 2005
898
0
3,016
hiztorikal.c.t.
Visit site
ya... what skywalker said is correct... stock engine with stock internal parts arent strong enough for the power of turbo.. Especially the high compression of turbos.. It will make the engine suffers.. N if boost too much.. Might face the possibity of "ka-booming" ur engine...

cheers
 

SkYwAlKeR

Over 10,000 RPM!
Senior Member
Mar 12, 2005
10,139
300
5,183
ePoh ~ malacca
Visit site
errr.... i thought turbo cars has lesser compression compare to normal engine??... err err.... or i made a mistake here??...

high boost = less compression ???...
 

gohkokeng

2,000 RPM
Senior Member
Feb 21, 2006
2,443
4
1,638
lol ok ok......then if i get those turbo engine like MIVEC or GSR

just engine only ma......many thing din mod....like extrator....intercooler.....those everything need to mod as well? BOV

btw what is BOT?
 

theorekz

500 RPM
Senior Member
Mar 29, 2005
898
0
3,016
hiztorikal.c.t.
Visit site
m?? sky, i thought turbo sucks more air.. and compress it into engine... therefore making it highly compressed inside the combustion chamber??? We have to wait turbo masta come to guide us lah.. hehe

gohkokeng taikor.. BOT = Bolt On Turbo. MIVEC as far as i know.. it is a NA engine... Only some ppl mod it to turbo engines... While GSR i'm not quite sure...
 

Random Post Every 5 Minutes

Detailien Hives Presenting You will be amazed by proton (show room finish)


You will be amazed

this is one of the many many Exora we coated at the beginning of the year

and the things is when it is not handled properly

Aftermuch delay of 2 years to my church friend
finaly when our hives is up, she was called in

upon arrival



more...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience