Wira SE (A) Max Speed 150 KM/H only?!?! Need to remove something?!

[drexchan]

sorry to disturb a bit here. as all sifu said that wira have rev cut at 7k rpm, rite? if my wira aeroback 1.5 (A) but not special edition lah just reach 6k rpm then will cut down. any possibility here? pls advise, need help to rev high. hihihi.....

That's not cut down, but upshifting. The ECU is programed as so. It upshifts to the next higher gear, not cut down. Certainly the RPM will be lower as the gear ratio changes to a higher one. Get it?

edited: made a mistake in the ECU thingy. 1.5A tranny doesn't require ECU control as 120Y has pointed-out.

 

[12oY]

That's not cut down, but upshifting. The ECU is programed as so. It upshifts to the next higher gear, nit cut down. Certainly the RPM will be lower as the gear ratio changes to a higher one. Get it?

yo 1.5 wire Auto gearbox does not require ecu to operation... it depend on the pick up cable and valve bodies... if 1.6 , 1.8, 2.0 and v6 gearbox yes.. it require ecu to operation

 

[yyap2]

12oY yup.. u r right...

 

[drexchan]

yo 1.5 wire Auto gearbox does not require ecu to operation... it depend on the pick up cable and valve bodies... if 1.6 , 1.8, 2.0 and v6 gearbox yes.. it require ecu to operation

opps!!! yeah.. you are right.