Suspension question on Accent RX-S

danieL

500 RPM
Senior Member
Oct 3, 2004
686
0
3,016
Hi guys,

My fren just bought the accent rx-s and he just changed the rims from the original 14" to 15" 195/55/15. Suspension is still stock standard.

The problem is, now when he fetch 2 ppl at the back, the tyres will scrape the fender when going on uneven roads or when taking hard corners.

I think the suspension is too soft on this car. Any recommendations on what kind of suspension is good for this car?

Anybody else have this problem?

thanks.
 

danieL

500 RPM
Senior Member
Thread starter
Oct 3, 2004
686
0
3,016
i think nobody has this problem......
 

RoCkie

Active Member
Senior Member
Jun 17, 2005
34
0
1,506
Subang Jaya
Hi Guys!

Actually... daniel was referring to my Accent... Thanks for helping daniel...

Okay... the thing is after i change the rims to 15" and tyres to 195/50/R15... whenever there is passenger on the rear seat, the moment i go through corners or through bumps... the tyre seems to have "contact" with the fender...

At first i though the tyres contact with the suspension or the coil... but the tyre shop fella tell me coz of the suspension too soft and tyre contact with fender...

haiz... any advise? plss.......

:confused:
 

RoCkie

Active Member
Senior Member
Jun 17, 2005
34
0
1,506
Subang Jaya
I'm not sure whether Kah Bintang will help me on this coz i change the stock 14" rims and stock 185/60/R14 tyres...

Does that void the warrenty..?
 

acbc

4,000 RPM
Senior Member
Jan 9, 2004
4,615
8
3,138
KD
RoCkie said:
Hi Guys!

Actually... daniel was referring to my Accent... Thanks for helping daniel...

Okay... the thing is after i change the rims to 15" and tyres to 195/50/R15... whenever there is passenger on the rear seat, the moment i go through corners or through bumps... the tyre seems to have "contact" with the fender...

At first i though the tyres contact with the suspension or the coil... but the tyre shop fella tell me coz of the suspension too soft and tyre contact with fender...

haiz... any advise? plss.......

:confused:
Most likely due to wrong rim offset.
 

ABV9750

Known Member
Senior Member
Feb 13, 2005
322
0
3,016
GHOST said:
Yeah, most probably it's due to the offset of the rimes. Rockie did u use any spacers??
hi, i got this problem too for my elantra 3..same 15" rim. the offset is 38. i think its OK.
but i wonder why we need to put thick spacer for front rim??does it effect tire balancing especially during high speed?

accent owner:
recently my friends send his accent for aircond repair. found out the compressor jammed, pipe burst, valve malfunction etc...go to potong kereta in Subang, found used similar a/c compressor in elantra bay..its the same.but pls watch out coz, there's a different between CBU and CKD compressor...errr..wonder why. btw, my friends is a cbu.
i heard the ckd use local made one..
 

RoCkie

Active Member
Senior Member
Jun 17, 2005
34
0
1,506
Subang Jaya
offset... wheel spacer...
this might sound stupid but i'm not familar with these....
when i install the rims and wheel at the shop.. they recom to install a round plate around the all four rims... dunno what iz that oso.. looks like it's suppose to tighten the rims to be more stable and durable... i guess...
 

GHOST

Known Member
Senior Member
Nov 16, 2003
51
0
3,006
Visit site
Rockie, those round plates that ur talking bout are spacers. It is used to increase ur wheels offset. Most probably without it ur tires will touch the absorbers while rotating.
 

RoCkie

Active Member
Senior Member
Jun 17, 2005
34
0
1,506
Subang Jaya
GHOST,
well if that the case.. that means i've already have spacers installed...but stil seem does not solve the problem...
lately i've not been carrying much ppl in my car... hahah... so the problem does not bother me ... at the moment...
but i stil hope that i can find a solution to this though :)
 

chris2000

1,000 RPM
Senior Member
Apr 14, 2005
1,114
24
3,138
Rockie

I think there is seriously something wrong with your rim offset.

Is it a 6.5j or 7j width rim?

I have seen many tyre shop try all sorts of things to fit the wrong size rim into a car. The only think I can think of is that the tyre shop probably sold the rims too wide for your car and if they dont put those spacers it will scrap or touch the inside which is your absorbers.

And by using this spacers, you put your rims too out and too near the fender, hence when you corner or under heavy load it scrap the fender.

Nothing to do with your too soft suspension considering its still stock height.

It is just wrong rim size choice. With proper width and offset, i don't think 15" will scrap the fender and stock height.
 

RoCkie

Active Member
Senior Member
Jun 17, 2005
34
0
1,506
Subang Jaya
Hi Chris,

I'm not too sure on the width of the rims... i'll give it a check later...

But looking at ur point, somehow it does seriuosly match the scenario here...
When the foreman install the rims and tyres on.. they "highly" recommend to install the spacer... (blue color round plate that fit nicely to the centre socket of the rim)
then only install the rims onto the car. The foreman claim that the spacer will improve the stability of the wheels, as the rims are now more fitted tightly.
The workshop fellas claim that they have install 15" rims onto other Hyundai Accent from them as well and none complaint about this problem...
I've check the inner part of the fender but i'm not sure whether is there any mark or indication of contact with the tyre b4...
i'm considering to "slim down" the width of the fender inner part to avoid any possible contact with the tyre... not too entirely sure whether is that the right thing to do onot...
 

BlackSamurai

9,000 RPM
Senior Member
Sep 2, 2004
9,656
24
3,138
near 7-11
www.hcc.ne1.net
this is the only active thread in Hyundai section.

Bump for your guys. Kambateh! Let's heat up the Hyundai section man.
 

RoCkie

Active Member
Senior Member
Jun 17, 2005
34
0
1,506
Subang Jaya
haha... i got abit problem and questions mar... need advise and guidance from all sifuss here :)

Btw.. BlackSamurai.. today when i was driving somewhere around phileo damansara area at 2.45pm... i saw a black color coupe... i can't recall the licence plate.. but i think i saw a blonde girl (i suppose.. cannot see properly) driving it... is the car urs?? :cool:
 

BlackSamurai

9,000 RPM
Senior Member
Sep 2, 2004
9,656
24
3,138
near 7-11
www.hcc.ne1.net
haha, I wish I have a blonde girl driving my Coupe. Nope, it's not me, I shall be in the office. :D

next time give her a Hyundai Friendly honk. :D
 

RoCkie

Active Member
Senior Member
Jun 17, 2005
34
0
1,506
Subang Jaya
haha... the blonde chic in da coupe dem chun wor... hehe :)
i scared i give frenly honk ppl think otherwise... then i'll be in deep shitz...
 

vyndicator

Known Member
Senior Member
Aug 5, 2005
68
0
1,506
Selangor
Honking is not a problem but banging would... :rolleyes:

Well, what about those spacers? Any improvement after removing them? What about knocking the fenders?
 

RoCkie

Active Member
Senior Member
Jun 17, 2005
34
0
1,506
Subang Jaya
Not yet try to remove the spacer though.... been very busy recently.... knocking the fender... sounds crazy for me.. coz my DIY is no good at all....
 

Jeffrey_occ

Senior Member
Sep 10, 2004
3
0
3,001
danieL said:
Hi guys,

My fren just bought the accent rx-s and he just changed the rims from the original 14" to 15" 195/55/15. Suspension is still stock standard.

The problem is, now when he fetch 2 ppl at the back, the tyres will scrape the fender when going on uneven roads or when taking hard corners.

I think the suspension is too soft on this car. Any recommendations on what kind of suspension is good for this car?

Anybody else have this problem?

thanks.
Hey..Man...Jeffrey Ong here!! i malas 2 go throught all dos comment la..hehe...juz answer u by ur ques tat posted..k!! i change my acccent rim n tyre to 205/50/15 juz after a get my new car...n im using potenza Re711 tat i using 4 my previous car...Damn Chun man!aldou the suspension is ori...but it juz realli stick 2 the road.....coz 205 normali use in 16 inch ma...so it gave u the tyre contact n handling as a 16" rim..but fuel comp less than using a 16" rim.but 1 thing....my rim off set is 2 big 4 accent..so will happen the same thing like u...i used spacer 2...
after a month,now im using 16" rim edy!!wif the rite selection rim 2 fit the car....now i didnt face the same prob edy!!..but frankli,16" rim didnt increase my handling(maybe its 2 high n need 2 be lowered 1st)...somore can say is worst than 15"....but provided u use 205/50/15.....no doubt...i wan my car 2 look nice....definateli goes 2...16" rim
SORRY MAN...I FORGOT TO SAY MY RIM WILL CONTACT THE REAR FENDER COZ MY TYRE IS BIG....NO REALLI BOUT THE RIM...CHECK UR TYRE OUT...COZ U MIGHT BOUGHT THE SAME SIZE AS MINE....RIM IS OK INSIDE..BUT TYRE 2 WIDE AFTER ADDED SPACER!!
 
Last edited:
Similar threads   Forum
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Hyundai
  Similar Threads  
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Hyundai

Random Post Every 5 Minutes

Just share with you a video I saw from another forum....

https://www.youtube.com/watch?v=jRNDNC1ypZE

If the bolder have rolled over one more time, the car would have been flatten....
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience