Race Craft(Beware)

[Grex_R]

Damn bought a spoiler by courrier from racecraft. Its not 1 piece carbon fibre cloth. Can see lines join 1 piece by 1 piece. Thats my comment. RM950+ should have skip buying it n should have bought spoon. all together around 8 pieces (4) up n (4) down if any zth understand it. Different from i bought a cf bonnet new at rm1150 cf damn cun n its 1 piece cf for the whole bonnet.

 

[wetwetwater]

Bro, how can 1 piece cloth be in the shape of the spoiler? Of cos have to "cut and paste" a bit here and there especially at the joints.

Original Nismo Skyline Z-Tune Carbon Bonnet is also joint at the scoop part. Check it out.

 

[mu24]

pictures??

 

[evo3]

but u really can see the joining parts ahhh? l

 

[zulu]

wetwater: good cf products are laid with one complete sheet

their products carry a big question mark

 

[ace79]

Aiyooo....this is not good. For RM 950++, you should add about 2-300++ and get Spoon instead. Then send it to a paintshop for Glasurit Type HS clearcoat ( damn strong one ) kawtim! Ys, it does add up, but the quality work that you get is priceless!

Damn bought a spoiler by courrier from racecraft. Its not 1 piece carbon fibre cloth. Can see lines join 1 piece by 1 piece. Thats my comment. RM950+ should have skip buying it n should have bought spoon. all together around 8 pieces (4) up n (4) down if any zth understand it. Different from i bought a cf bonnet new at rm1150 cf damn cun n its 1 piece cf for the whole bonnet.

 

[KATOW JO]

hmm..no pics...like i said b4..so easy to destroy any company's rep..just type and nobocy ever ask for proof...i know kev-tec here also try to do this with proton..till now no proff whatsoever..all they do is my makcik,cousin,papa my freinds freind,cousin father in law etc2..has this problem..but no pics and proof..

so,i'll regard this as some stoopid attempt to destroy a company's image...

 

[AXXeLL]

Picture please !!

 

[Grex_R]

will update dun worry. CF dun come in joints ok its a big piece of cloth n iron to the fibre n add raizin to harden it then sand paper it then laquer on top for finishing. its the workmanship thats matter here on how they iron it>>>>>

 

[CyborgR]

picture speak a million words, now hp are so handy, just grab some pic n upload it fren :)

 

[AccordR]

Damn bought a spoiler by courrier from racecraft. Its not 1 piece carbon fibre cloth. Can see lines join 1 piece by 1 piece. Thats my comment. RM950+ should have skip buying it n should have bought spoon. all together around 8 pieces (4) up n (4) down if any zth understand it. Different from i bought a cf bonnet new at rm1150 cf damn cun n its 1 piece cf for the whole bonnet.

Dear Grex_R,

We at RaceCraft will always stand upon the quality of our products. All products carry a 6 months International Warranty. If you are not happy with the quality, we will change the product for you without hesitation.

Please email me your invoice number and also the serial number on the product itself. We can trace what is the product and why is it defective.

Normally for spoilers, we use a complete 1-piece construction. It has always been like that and will always be like that.

Most importantly when you buy a carbon fiber product, the support and warranty is very important. Even if you buy another Japanese brand but there's no warranty, you might end up keeping it although the quality is bad. So rest assured when you buy RaceCraft, you will get the best.

Grex_R, please contact me at 017-365 2777 as soon as possible. I'll arrange the replacement for you ok? Please don't be depressed.

Thank you.

Regards,
Shedden

 

[zulu]

grex r: was your issue resolved?

I emailled them asking for a quote beginning of the week... but they hace yet to reply?!?!?! what kinda a business are you guys running?