Possible Turbo Upgrades for RB25 GTT Auto?

[Driftmeister]

Aftermarket ECU...period. If you guys consider to run safe on whatever boost other than stock. Till now im running stock until hv enough $$$ for ECU. A Blown engine should be the last thing u want to experienced. For less than the price of a half cut with labour, u hv something that is tunable yet open the doors to more mods.

 

[Driftmeister]

i will be the first one to test it out bro.... but don't boost too high, it will burn our face...

i think you should go for HKS 2835 Pro and maybe get mines to tune your car in japan.... it will look stock standard but it smoke everyone else....

Mines ECU is meant for Japan fuel..unless someone from Mines comes down to tune it for you on the road with our fuel.

 

[RERider]

ECU for GTT AT

Not many options for GTT auto. Try to get F Con SZ, E-Manage Utimate or UniChip for auto. Get a Power FC if u hv a manual. Value for money.:_:


P/S: I have read an article, there is one ER34 AT in Japan with RX6 turbine, tomei stuffs + F Con V Pro + etc. Tuned by Climax @500ps/60kg-m. :shocked: hmmm...How long does the gearbox lasts?

 

[fcruz3r]

if u gonna get rx6 turbine ....dont forget u need to get the accompanying manifold, water/oil feed lines, custom elbow, dump pipe all done to suit coz its not gonna be a direct bolt on.

Take a look at this place
http://www.slidingperformance.com/catalog/product_info.php?cPath=25&products_id=319

brand new high flow is in the "semi-affordable" range of below RM3k ...we have lots of skyline members here using this turbo and its the best bang 4 the buck turbo upgrade u can get ...best thing is .its a direct bolt on with no modifications neccessary (of course u will need to get an safc or similar to tune...and upgrading ur intercooler and exhaust is only logical if u wanna get full use of the turbo)

 

[RERider]

send to Aus?

 

[fcruz3r]

slide is based in Aus ...i'll ask him if he does overseas shipment...otherwise i can help u out if u need.

There are hundreds of skylines in Aus so if ur looking for parts ...its much easier here than in msia. Join this club and u can see the for sale section is constantly updated every day with all sorts of parts for the skyline. Even after conversion rate..u'll find that buying parts from here is much cheaper.

website is

www.skylinesaustralia.com and slidewise is one of the traders registered with this club which has hundreds of members.

 

[cmng]

emm skyline part more easier to get at aus ?
i wondering since a lot of friend from aussie source part at malaysia

i believe the price here is much cheaper than aussie even after shipping to aussie
but on part availability.. aussie is better option

 

[fcruz3r]

parts

aftermarket and electrical parts are cheaper here...but 2nd hand jap rims are cheaper in msia....and also of course the kedai potong parts are cheaper to source from msia...but the killer is always postage....shipping parts out from ozzie can cost quite a sum...join the forum i told u about in my previous post...and u can look through the member sale section...then compare wif prices in msia....not sure but if i compare prices in this forum ...usually more expensive...but thats probably just the members of 0-2-100 wanna make more money..heheh..no offense ah people.