mods on Accord CF4

[fobs]

pengsan ooooooooooo

anyway, anything that can fit h22a, can fit f20b


weihh,... part time work kah? wanna buy CL7R kah?

 

[bien335]

pengsan ooooooooooo

anyway, anything that can fit h22a, can fit f20b


weihh,... part time work kah? wanna buy CL7R kah?

yes, somebody buy this intake manifold so that I can by a Euro R!

 

[5efte]

yum yum yum :D

brand new, never been used, for H22a. not sure if will fit F20B or not.

accepting offers :D

Wow, tak mampu beli le, New skunk2 intake manifold.
Yeah, last time Yewson wanted to sell to me used skunk2 intake manifold, kosong without injector & throttle body rm1500 but euro r punye completed injector & throttle body rm1400, Now people sell TPS & SACV pun udah beratus2...
F20B confirmed can installed this skunk2 & euro r intake manifold!

 

[bulet]

Wow, tak mampu beli le, New skunk2 intake manifold.
Yeah, last time Yewson wanted to sell to me used skunk2 intake manifold, kosong without injector & throttle body rm1500 but euro r punye completed injector & throttle body rm1400, Now people sell TPS & SACV pun udah beratus2...
F20B confirmed can installed this skunk2 & euro r intake manifold!

wow delicious yummy.....mieow....
u bought it ke bien?but dun think to upgrading engine for moment. wan to perfecting red sun 1st....bengkok sana, terkumpil sini, bunyik sana, begegar sini......lots of cacat cela at my car now

 

[fobs]

masuk jgn dont masuk

heheheeee!!!

 

[amdfaisal]

bulet...

perfecting the car to be a potential candidate for the "cars for sale" section desuka?

 

[Sato]

Abit off topic ar....anyone using Bitcomet ar ???

Can help me with the setup ar ? Now only getting like below 10kb/s ar !

 

[bulet]

bulet...
perfecting the car to be a potential candidate for the "cars for sale" section desuka?

no lah.....red sun will be candidate there 5 years from now kot hehehe...sometimes feel like that car wanna collapse, gegar sana sini...the "kimochi" (feel) really different when i ride in abang ajas car n abang pira car. my engine mounting pun started to shake my engine when low speed, my front absorber sounding tikus when go through hump, my dashboard/interior shake in high frequency when naik bukit......n macam2 lagi la..then anyone who ride in red sun will feel like.."naik euro r, tapi rasa macam naik bas sekolah...macam2 bunyi ada" hehehhe ......

eh abang faisal, Mun Lee ade eh that seat?

few days ago jalan2 at digital mall, jumpa abang fairy. changed working place dah...from g floor to 1st floor.

Abit off topic ar....anyone using Bitcomet ar ???
Can help me with the setup ar ? Now only getting like below 10kb/s ar !

sorry...i'm little buta IT...

 

[bulet]

what lychees story?still in tengah laut makang ikang bakar?

 

[amdfaisal]

bulet... wow... so dahsyat ur car. wat happened? or was the car like that even in japan? anyway... to get the car's dash rattle-free... you can try to take some bits out piece by piece and then tighten some screw here n there then put some double-sided tape here n there too to dampen the vibration effect etc etc... take a two-day leave and then perform the operation... kedai doing that... dono la...

since ur baby is not out yet... now is the best time to do some DIY? otherwise gerenti susah.

for the seats... just call mun lee and if they don't have them, book them in advance. inform the workshop juga

 

[fobs]

what lychees story?still in tengah laut makang ikang bakar?

makan kerang and sotong,...


bulet, ur red sun so much sound? aiyooooo!!! prev jap owner project baek inside the cl1 kottttt,...

hehehe!!!
bila u wanna come here jumper matki???

fairyboy long time silent onli, no sound pulok,...


sato, what is bitcomet? come to tt bit by bit??? uikkkssss


come to think of it, cf4/cl1 quite rigid the body.
one fella juz kena sandwich day b4 yesterday, vios hantam belakang, he hantam front pv6.

vios teruk
p6 bumper kemek and trunk pun kemek

cf4 front small scratches, rear scratches + rear bumper clips i think 5 numbers need replacement.

 

[bulet]

bulet... wow... so dahsyat ur car. wat happened? or was the car like that even in japan? anyway... to get the car's dash rattle-free... you can try to take some bits out piece by piece and then tighten some screw here n there then put some double-sided tape here n there too to dampen the vibration effect etc etc... take a two-day leave and then perform the operation... kedai doing that... dono la...
since ur baby is not out yet... now is the best time to do some DIY? otherwise gerenti susah.
for the seats... just call mun lee and if they don't have them, book them in advance. inform the workshop juga

had open the dashboard before...found lot places no screw....i'm guess that before i bought that car, last owner thinked to scrap the car kot. want to screw back all places but dun know where can find all those screws.....kedai hardware tak jual.

just called mun lee....euro R seat just sold. but they have DC5 seat n said i can modify the tapak. dc5 seat ok ke?thinking of evo5 or evo6 seat la.....baru la same species seat. or anyone here wanna sell their CL1 seat?....dun worry, i wont ask to nego. insurance company will pay for me hehehe

 

[Sato]

bulet... wow... so dahsyat ur car. wat happened? or was the car like that even in japan? anyway... to get the car's dash rattle-free... you can try to take some bits out piece by piece and then tighten some screw here n there then put some double-sided tape here n there too to dampen the vibration effect etc etc... take a two-day leave and then perform the operation... kedai doing that... dono la...

since ur baby is not out yet... now is the best time to do some DIY? otherwise gerenti susah.

for the seats... just call mun lee and if they don't have them, book them in advance. inform the workshop juga

Last time went there....mun lee staff said only will sell it all together with rear seats and side door panels ! Not willing to separate the front recalo woo....

 

[bien335]

abe bulet,at first was thinking of installing the IM, then, my car autotragic, not much use I think.

and now got some clak clak sound at 6000rpm ++.. takooooot

haih..

CL7 CL1 CL7 CL1 Caldina :p

gewe doh gege bilo nok buat bekwoh.

kalu buat bekwoh, dok dan nok mengyuropahkan diri.

kalu beryuropah pulok, lagu mano nok bekwoh? pitih xdop, pitih perabih beli kereto.

pening..

cari kerja kat lubuk emas lah mcm ni.

 

[fobs]

had open the dashboard before...found lot places no screw....i'm guess that before i bought that car, last owner thinked to scrap the car kot. want to screw back all places but dun know where can find all those screws.....kedai hardware tak jual.

just called mun lee....euro R seat just sold. but they have DC5 seat n said i can modify the tapak. dc5 seat ok ke?thinking of evo5 or evo6 seat la.....baru la same species seat. or anyone here wanna sell their CL1 seat?....dun worry, i wont ask to nego. insurance company will pay for me hehehe

no nego???
i sell,... 20k, u 10, i 10,... okie???

 

[amdfaisal]

bulet... if your workshop is willing to pay... i don't mind changing to normal CF4 seats hehe...

DC5 seats... quite low and not suitable for vertically challenged ppl like me :(. if you like CL1 seats, i don't really recommend DC5 seats because the side thingy (i don't know what to call them) will not allow ur legs to be apart too much... in other words... cannot kangkang besar when using DC5 seats... been there done that... CL1 seats more comfortable.

 

[aja]

Esok me in Ipoh..shopping spree. Bukak puasa also there.

Sapa2 kat Ipoh esok?.

 

[fobs]

bulet... if your workshop is willing to pay... i don't mind changing to normal CF4 seats hehe...

DC5 seats... quite low and not suitable for vertically challenged ppl like me :(. if you like CL1 seats, i don't really recommend DC5 seats because the side thingy (i don't know what to call them) will not allow ur legs to be apart too much... in other words... cannot kangkang besar when using DC5 seats... been there done that... CL1 seats more comfortable.

in other words, masak teloq

Esok me in Ipoh..shopping spree. Bukak puasa also there.

Sapa2 kat Ipoh esok?.

dun forget to look for Sato. If u want his digits, juz ask me,... else sato can pm u also.

 

[fobs]

threesa sudah keluaq

 

[bulet]

abe bulet,at first was thinking of installing the IM, then, my car autotragic, not much use I think.
and now got some clak clak sound at 6000rpm ++.. takooooot
haih..
CL7 CL1 CL7 CL1 Caldina :p
gewe doh gege bilo nok buat bekwoh.
kalu buat bekwoh, dok dan nok mengyuropahkan diri.
kalu beryuropah pulok, lagu mano nok bekwoh? pitih xdop, pitih perabih beli kereto.
ening..
cari kerja kat lubuk emas lah mcm ni.

mu kijo la dulu baghu bekwoh. mu nok buwi anok bini make gappo nati.....nati aku doh tok se nga keto aku, aku tanyo la ko mu ........bekwoh nati jeput aku (fail sungguh kelantanese aku)

no nego???
i sell,... 20k, u 10, i 10,... okie???

hehehe....had thot in mind. 20k mahal sangat la bang fobs kekeke....10k tu logik la gak. u take 7, i'm 3......okeh?

bulet... if your workshop is willing to pay... i don't mind changing to normal CF4 seats hehe...
DC5 seats... quite low and not suitable for vertically challenged ppl like me :(. if you like CL1 seats, i don't really recommend DC5 seats because the side thingy (i don't know what to call them) will not allow ur legs to be apart too much... in other words... cannot kangkang besar when using DC5 seats... been there done that... CL1 seats more comfortable.

ye ke dc5 can masaq my teloq?no wonder la my dc5 fren said he love my seat very much......