JL subs... need help sifuz...

[appleyard]

jeff
you can try and look for twofish here:
http://www.autoworld.com.my/forum/summary.asp?summary=1&forum=ap343624697&page=1

i myself trying to hunt him for a tempest.

you could call the shop and ask them to ship it to you. whereabout are you anyway.

monoblock, yeah you can go for the prokick dg1200 which will give you 1200w @ 1 ohm. Someone is selling his Directed 1100d monoblock for RM1200 at www.iascamalaysia.com(its a good amp) and if you are in kl you can try and find the Zeuz monoblock for RM1200+ (not to be mistaken with Hifonics Zeus). All are above 1000w @ 1 ohm which you need 2 CVR to go 1 ohm.

 

[jeff_v2]

still looking for kicker cvr, anyone can help me????
bout the mono amp maybe go for
ROCKFORD FOSGATE PUNCH 301M MONO(1 CHANNEL) 900 WATT AMPLIFIER
spec:
Hook up a single 4-ohm subwoofer to Rockford Fosgate's Punch 301M mono amplifier for 150 watts RMS of MOSFET-fueled power. Better yet, string together two 4-ohm subwoofers, dial in a low-frequency boost (up to 12 dB at 45 Hz), and get ready for 300 watts RMS (at 2 ohms) of seat-shakin' bass voodoo! A variable low-pass crossover (50-250 Hz at 24 dB per octave) improves performance by blocking unwanted frequencies from your speakers. Your system won't just sound better, it'll operate more efficiently, too. Preamp outputs are part of the package, too - they'll let you add a second amp to your system, even if your receiver only has one set of preamp outputs. Heavy-duty power, ground, and speaker terminal connectors accept up to 8-gauge wire.

150 watts RMS x 1 at 4 ohms
300 watts RMS x 1 at 2 ohms
requires 10-gauge power and ground leads and a 30-amp fuse wiring and hardware not included with amplifier
selectable 50-250 Hz variable low-pass crossover, 12 dB per octave
TRANS"ana circuit designs keep voltages low and signal paths simple in the pre-amp section, for minimum distortion and maximum musicality
MEHSA provides more efficient transfer of heat from MOSFET output devices to the heatsink for cooler operation
TOPAZ noise-killing differential inputs that eliminate 80% of ground loop noise
NOMAD advanced protection circuitry for "intelligent" shutdown protection
preamp- and speaker-level inputs
selectable Punch Bass boost (0/6/12 dB at 45 Hz)
frequency response 20-20,000 Hz
11-1/8"W x 2-3/8"H x 9-7/8"D

so what u thing???? worth it or not
someone is selling 2nd hand also... what for feedback

 

[Jrd_Lee]

Originally posted by jeff_v2@Feb 24 2005, 16:42
still looking for kicker cvr, anyone can help me????
bout the mono amp maybe go for
ROCKFORD FOSGATE PUNCH 301M MONO(1 CHANNEL) 900 WATT AMPLIFIER
spec:
Hook up a single 4-ohm subwoofer to Rockford Fosgate's Punch 301M mono amplifier for 150 watts RMS of MOSFET-fueled power. Better yet, string together two 4-ohm subwoofers, dial in a low-frequency boost (up to 12 dB at 45 Hz), and get ready for 300 watts RMS (at 2 ohms) of seat-shakin' bass voodoo! A variable low-pass crossover (50-250 Hz at 24 dB per octave) improves performance by blocking unwanted frequencies from your speakers. Your system won't just sound better, it'll operate more efficiently, too. Preamp outputs are part of the package, too - they'll let you add a second amp to your system, even if your receiver only has one set of preamp outputs. Heavy-duty power, ground, and speaker terminal connectors accept up to 8-gauge wire.

150 watts RMS x 1 at 4 ohms
300 watts RMS x 1 at 2 ohms
requires 10-gauge power and ground leads and a 30-amp fuse wiring and hardware not included with amplifier
selectable 50-250 Hz variable low-pass crossover, 12 dB per octave
TRANS"ana circuit designs keep voltages low and signal paths simple in the pre-amp section, for minimum distortion and maximum musicality
MEHSA provides more efficient transfer of heat from MOSFET output devices to the heatsink for cooler operation
TOPAZ noise-killing differential inputs that eliminate 80% of ground loop noise
NOMAD advanced protection circuitry for "intelligent" shutdown protection
preamp- and speaker-level inputs
selectable Punch Bass boost (0/6/12 dB at 45 Hz)
frequency response 20-20,000 Hz
11-1/8"W x 2-3/8"H x 9-7/8"D

so what u thing???? worth it or not
someone is selling 2nd hand also... what for feedback

Jeff_v2,

If you wan to find KICKER CVR or ROCKFORD any serious amp, i think he can help you. Price is not the problem, cos he can give u a specially price.
But please sms to let me know what model you wan to find, then i help you to ask him, ok? Used audio or new audio also got.... :P
Then i have a DIAMOND 6" Component M-361, and a AUDIOBAHN woofer 12" wan to let...........pls help me to ask somebody contact me. DIAMOND price is RM 700, then woofer price is RM 550.
I wait for you contact......you lost my name card?? Nevermind, my contact number is 0165282515.
Good luck. :blink: