Isawara CAI

[tykoh]

yup the hose is tilted to the front a bit lah.... i think the air will flow to my open pod.... i had put a heat shield to avoid the radiator fan blow the hot air to my open pod too...

next project will be installing the vacuum meter and volt meter that i bought last week. beside that i still pending on my pivot raizin VS to be ship to me also...

nothing else i will do on this car... coz i think its not worth to put too much money on it... better save some to buy a more powerful car...

 

[edwin_lcw]

Sky your cai got effect ar ? just a portion only producing cold air ? i not tlaking your CAI but just asking coz my fren Iswara also like dis .... but i dunno weather got effect anot ? coz the air is sucking around not onli ont part worr ..... can do a aluminium cover to cover the thing to make the air is from the hose ar ?

 

[nitrus]

tykoh : where u get that alluminium thing u use to wrap your airfilter ar? wat material is it ? with the radiator fan blow or the engine heat, it wont get hot meh?

 

[SkYwAlKeR]

Sky your cai got effect ar ? just a portion only producing cold air ? i not tlaking your CAI but just asking coz my fren Iswara also like dis .... but i dunno weather got effect anot ? coz the air is sucking around not onli ont part worr ..... can do a aluminium cover to cover the thing to make the air is from the hose ar ?

not vr effective compare to how in seal up the CAI hose to the filter when i'm using the stock airbox... but that's the most u can do... unless like what u said, make an airbox for it.... of coz it is possible to make, i jz being lazy... haha... besides, with airbox, u might feel some air restriction at high speed or high rpm...

ohya, the front end of my CAI hose is at the bumper facing the front... forcing cold air to enter when travelling....:regular_smile:

 

[tykoh]

tykoh : where u get that alluminium thing u use to wrap your airfilter ar? wat material is it ? with the radiator fan blow or the engine heat, it wont get hot meh?

nitrus: actually its just an alluminum foil tat sold in supermarket... my purpose is to prevent the filter sucking too much hot air... beside tat i had a put a heat shield between the radiator and the ram pipe it can prevent the hot air been blow also...
when vehical travel the cold air will draw to the front of the car... so i think wont tat hot also...

 

[SkYwAlKeR]

that aluminium foil use by ur mum to bake cake one loh.... many things u can make use of from ur home... not necessory it must be car performance parts...

 

[SkYwAlKeR]

dual CAI...:shades_smile:

headlights relay relocated...

 

[SkYwAlKeR]

jz now took off my headlamps and do something with it... managed to snap some CAi picture...

 

[nitrus]

wahh skywalker ... i admire ur effort.
make me wanna redo my CAI only .. ahahahahaa.. mine is ok also, but mine two seperate hose, one connect to ori rampipe and relocate to side, then another hose from front bumper up to the gap between the headlights.
if u get it la... hahhaa..

 

[SkYwAlKeR]

ahaks... tenkiu tenkiu...
ohya, pictures says everything... snap some of urs and post up here lar... no need explain susah susah... hehehe...

 

[edwin_lcw]

your filter got effect ar ? skywalker ?

 

[SkYwAlKeR]

filter??... got arr... able to suck more air mah... if not paying so much for K&N filter for what rite... hehe...
but then, for pickup and low speed, still prefer stock air filter... high speed/rpm, this filter syok... got nice air sucking sound as well....

 

[K_Takuya]

just done CAI to my wira yesterday. Took around 3 hours. happy with the results, but with some bruises on my finggers :)

 

[SkYwAlKeR]

just done CAI to my wira yesterday. Took around 3 hours. happy with the results, but with some bruises on my finggers :)

so, where are the pictures??... hehe...:regular_smile:

 

[edwin_lcw]

wah need or not oh 3 hours ? u doing the CAI how one oh ? for OPF one ar ?

 

[jeyadev]

ehhh... more photos larr... I wanna do this for *my* Saga buruk :)

 

[SkYwAlKeR]

wah need or not oh 3 hours ? u doing the CAI how one oh ? for OPF one ar ?

haha... mayb include minum 3 cans of soft drink, smoke 2 packets of ciggie, take a short nap, mandi and test drive his car leh... thats why need 3 hours lorr... wakakaka...

if u know, vr fast geh... but some still need to figure out the best path to route their CAI hose mah... cannot say people slow geh....:regular_smile:

 

[gohkokeng]

wah u c guys DIY CAI here i also blur liao

if my LMST wanna put APEXI DUAL FUNNEL later.....what would be the best of the project with CAI?

need ram? adapter? hose? whatever?

please guide sifu-sifu

 

[K_Takuya]

wah need or not oh 3 hours ? u doing the CAI how one oh ? for OPF one ar ?

It took 3 hours becauce :emoticon_U:

1.im doing it alone
2.insufficient tools (only those standard tools by proton)
3.Taking out the snorkle without taking out the fender or bumber first was a headache.
4.going to suipermarket to DIY my own CAI filter. i bought "penapis teh" coz the material is stainless steel. cut out round and put it into the CAI hose. air still flow smooth. So, this can block small rocks,leaves etc from entering my CAI hose towards the airbox.

Done...

 

[tl1987]

yo bro Skywalker u using k&n air filter rite ? dat 1 consider open pod type ah ?? how much u bought it ?? if my stock air filter wan to do CAI how leh....go through where n where come out ?? sorry i noob :D