Help. Z32 TT engine

[mazranz]

Kevin... would definitely be interested in the unichip. I'm getting now maybe 250km or so... pretty sad... Where in puchong do you install it? Is it your shop?

With regards to the half-cut, can I get parts off it? I don't need engine/tranny etc... just looking for the strutbar, electric fan (if there is any).

Maz

Mazranz,

to come to think of it i have an extra complete Unichip set for the Z if you are interested. it includes the unichip, turbo module and boost solonoid. all you have to do is to install and tune at Puchong. Installation and tune will cost you about RM600 and unichip set i would like to sell for RM1200... you can run multiple maps with the unichip as well as launch control and antilag.

call me if you are interested 016 230 4888

Kevin

 

[Z-Monster]

Hi Kevin,

Where exactly in Puchong do you tune the Z32 ?
Btw, if you are free this Sunday, drive down to PJ for the Raya Open House at Nasi Lemak Cikgu. We plan to meetup at Shell station in 1Utama/TV3 @ 11am. Sure love to see your 300zx !!

Hardee

Hi Hardee,

Sorry i missed the gathering. i just came into this site today. Pls let meknow when is then next gathering. I also have an older Z.....a 280zx

anyways, there is a decent tuner in Puchong located in puching perdana. i can take u there but pls dont ask me to give you directions of draw u a map.. i'm no good like that.

call me if you need to 016 230 4888 kevin

---------- Post added at 02:55 PM ---------- Previous post was at 02:51 PM ----------

Hi Kevin,

Where exactly in Puchong do you tune the Z32 ?
Btw, if you are free this Sunday, drive down to PJ for the Raya Open House at Nasi Lemak Cikgu. We plan to meetup at Shell station in 1Utama/TV3 @ 11am. Sure love to see your 300zx !!

Hardee

hi hardee,

i am sorry i missed the gathering. i didnt know about it untill now.. anyway. there is a decent tuner in puchong perdana. i can take u there but pls dont ask me to give directions i am not good with that.

Pls let me know whne you next meeting is.. i will do my best to be there. call me if you need to.

Kevin Kong 016 230 4888

---------- Post added at 03:00 PM ---------- Previous post was at 02:55 PM ----------

maz,

no!! u need to tune your engine quick!!! hahah u give 300zx a bad name with that kinda mileage man... :) i dont have a shop its just a tuner whom i have used for 3 of my cars. he is a decent tuner and can tune well.

anyways as i said to Hardee.. feel free to call me... i can take u there. as for the halfcut.. no nothin gis to be taken off the car.. the shop wants to sell it whole... i am also looking for a strut tower bar. let me know if you find it also k...:)

 

[mazranz]

maz,

no!! u need to tune your engine quick!!! hahah u give 300zx a bad name with that kinda mileage man... :) i dont have a shop its just a tuner whom i have used for 3 of my cars. he is a decent tuner and can tune well.

anyways as i said to Hardee.. feel free to call me... i can take u there. as for the halfcut.. no nothin gis to be taken off the car.. the shop wants to sell it whole... i am also looking for a strut tower bar. let me know if you find it also k...:)

Yeah... it's pretty bad!! hehe... probably only next weekend I can drag myself to fix the car. Let me know if you're going with hardee, we can drive there and check it out.

Will contact you probably next week.

Maz

 

[mazranz]

Kevin / Hardee,

Do you wanna go to the ZX tuner shop tomorrow (saturday)?

Maz

 

[HBS]

Yeah, mostly I think ;) They didn't get aftermarket parts, except for hoses. I also had the turbos rebuilt/serviced.

Engine quite good now... still have yet to take it to the dyno to see what's it putting out.

But need to sort out that fuel guzzling thing (it's worse than last time). So maybe an ECU remap is in order.

What are you driving now?

still remember the guy that was on same table with you & Hardee during 370Z preview?

That was my bro & me....& both of us share the Z33....

& we both love the 300ZX Z32!

 

[300zxtt]

Kevin / Hardee,

Do you wanna go to the ZX tuner shop tomorrow (saturday)?

Maz

Maz,

Morning should be OK with me but noon, I have a wedding reception to attend. SMS me if anything come up.

Kevin,

Not sure when the next meeting.....but you can always call for one if you want...preferably Friday nites.

Hardee

 

[mazranz]

still remember the guy that was on same table with you & Hardee during 370Z preview?

That was my bro & me....& both of us share the Z33....

& we both love the 300ZX Z32!

Time for you to get one! :) They are pretty hard to come by though...

 

[mazranz]

Guys... check out this site for ZX parts...

http://www.zcentre.co.uk/shop/print_catalog.php

Might give you some ideas. I know hardee is looking for some of these parts... maybe we can share a shipment!

Z-Monster... when can I go and tune my car at your garage?

 

[300zxtt]

Guys... check out this site for ZX parts...

http://www.zcentre.co.uk/shop/print_catalog.php

Might give you some ideas. I know hardee is looking for some of these parts... maybe we can share a shipment!

Z-Monster... when can I go and tune my car at your garage?

Thanks, Mazranz.
Great Z32 parts site...love those bodykits! However, in terms of today exchange rate, its quite expensive as we will have to pay 5x the cost. Alternatively, will have to look at US for parts (cheaper exchange rate) unless its only available only in UK. I normally get my z32 parts (if cannot get in Malaysia) from this site 1990-1996 Nissan 300zx Z32 Twin Turbo & Non Turbo Performance Parts
Great site too as it carry parts from Z32 to the latest Z34 (370Z).

Let me know too when you are going to Ken@Zmonster's garage for your tuneup.