Dynos in M'sia

[pk1chew]

hey pk1chew,

I'm from mainland not sure about the location.Can you guide me, pls ?

Campully,

If you from Penang bridge, follow the lane to Georgetown, than you will pass by TESCO/E-Gate
on your left, just drive straight till you see Shell Station on your right. Just make a u-turn under
the fly over. Like the way return to Penang bridge, when you see shell station turn left the shop
same row as Kangaroo Courier service.

hey.....what modification you did it to your car ? may i kpc.

 

[rock.w105]

Here a list of Dynos in Malaysia that I know of. If I missed out any or got the wrong info, pls fill it in k? Klang Valley N1, Sunway - Dynojet 4wd GT.
_________________________________________________________________________________
Ratatouille
Free Breast Implants

Bump: Here a list of Dynos in Malaysia that I know of. If I missed out any or got the wrong info, pls fill it in k? Klang Valley N1, Sunway - Dynojet 4wd GT.
_________________________________________________________________________________
Ratatouille
Free Breast Implants

 

[baboymahal1811]

To All the sifu,Please help.....
I am using b18cR with toda C,Adj cam pulley,e-manage,4-2-1,Air filter,5-zigen 304,
after dyno......the horse power draftly can get arround how many Horse Power....???
THANKS.....

 

[a_kei]

yohooo...GOOD NEWS for Melaka....

HAve a new dyno machine in melaka..right?

 

[labulabi]

where?:ridinghorse:

 

[a_kei]

Is it Martech Performance Workshop? read frm City explorer

 

[Dmonster]

where to dyno more cheaper and nicer?

 

[kanan]

I heard Dynoing sometime can cause the gear teeth chip out :joyman:

 

[SkYwAlKeR]

Is it Martech Performance Workshop? read frm City explorer

yeap... martech is the first workshop in melaka to have dyno machine... its located in taman merdeka... dyno run rm150...

---------- Post added at 11:12 PM ---------- 6 hour anti-bump limit - Previous post was at 11:08 PM ----------

I heard Dynoing sometime can cause the gear teeth chip out :joyman:

i heard Dynoing sometime can cause engine blow

 

[kanan]

Do we need to run the engine at all RPM under load? I hardly drive my car more than 5K rpm. most of it 2-3.5K rpm only . Can we just request to the tuner just run the test till 5K rpm only?

 

[dorift0]

to ensure a safe dyno, engine oil must be fresh, engine no leaking in tiptop condition, nothing will blow, unlesss tuner pushes beyond the limit, likely to happen to most standalone ecu cars which has NO limiter or cuts

 

[farud@mate]

powerzone at glenmarie,dyno 2wd

 

[pijulrs]

Tomorrow im gonna go to kl...did anybody know where dyno that open on sunday and provide me also
their phone number?

 

[rex79gt]

Pro Dyno, kuching, Sarawak
DynoJet, 2Wd

http://www.facebook.com/pages/PRO-DYNO-Kuching-Sarawak-Sdn-Bhd/103501609687491?ref=ts

 

[nuarz_87]

powerzone at glenmarie,dyno 2wd

better go sunway

 

[etheryx]

Sorry noob here, in penang island there is 2 dyno, 1 in sg ara and the other behind the shell at the jelutong express way ar? which 1 is better? Just got my Satria Neo CPS but cannot accelerate much. Will dyno help? They can also tune before and after also rite? I want to reach 120kmh also very hard le.
My old satria 1.3 can tapau this car and both stock... advise please.. TQ :)

 

[ehdrian]

Sorry noob here, in penang island there is 2 dyno, 1 in sg ara and the other behind the shell at the jelutong express way ar? which 1 is better? Just got my Satria Neo CPS but cannot accelerate much. Will dyno help? They can also tune before and after also rite? I want to reach 120kmh also very hard le.
My old satria 1.3 can tapau this car and both stock... advise please.. TQ :)

u gotta be kidding bro?..how come ur car so under power?..well, u can to NORTHERN GARAGAE at SG ARA and consult them and see..

 

[EGNINE]

u gotta be kidding bro?..how come ur car so under power?..well, u can to NORTHERN GARAGAE at SG ARA and consult them and see..

go to Northern garage, mpower suxxxxxx

 

[MKMD428]

why did u said so? i was thinking of going there

 

[ehdrian]

GT Auto and Millenium is good..