DIY - Cooler AirCon for FREE

[naqi]

fark.. so do I wrap everything or not?

wrap the whole car even better!

 

[justhao]

Wrap the cold pipe with Insuflex ok already? Got any sample wrap with aluminium coil? Hand gatal already. Haha.

 

[Bertrand Ng Ka Qi]

which side should i wrap??? driving persona elegance....
i think should be tat piping near firewall....

 

[stupidcar]

which side should i wrap??? driving persona elegance....
i think should be tat piping near firewall....

Dei, after a round of driving, u can see condensed water on one of the tubes.
In this case, follow the fat thingy.

 

[vr2turbo]

Dei, after a round of driving, u can see condensed water on one of the tubes.
In this case, follow the fat thingy.

Or touch and is cold.......hhahhahahha

 

[gunnerzz]

I also diy wrap the air con pipe.
already done on :
-waja
-kenari
-pajero
-exora
-blm

hardest is my waja as the engine space is very2 tight.
longest is the pajero and the exora as its equipped with rear blower.
i used the same material but i bought it in long sheet.4 feet wide and i cut a long piece then wrap is around the pipe.

the insulator is also used as sound insulator on my blm.i put it inside the door panel as its hollow.can feel its quiter.

 

[dkny]

Can anyone share me where to Wrap Myvi Lagi Best

 

[vr2turbo]

Can anyone share me where to Wrap Myvi Lagi Best

Bro. dkny,
Wrap the cold tube that is coming out of the firewall.
Can refer to bro. cvkit17 post #6 on the first page of this topic....

 

[marv3]

Is it possible to use aluminum foil? Has anyone try it?

 

[vr2turbo]

Is it possible to use aluminum foil? Has anyone try it?

Unless it is a few layer. Anyway this tube easier, just cut the length, cut the side and slip the tube in then cable tie it.

 

[marv3]

Unless it is a few layer. Anyway this tube easier, just cut the length, cut the side and slip the tube in then cable tie it.

Hard to find. The last one i had from CVkit, it wasnt the right size. So after a while, the tube open up, leaving the aircon tube expose....Anyone knows where got shop or aircon shop that sells this?

 

[g88]

Is it possible to use aluminum foil? Has anyone try it?

foil doesn't 'hold' cold

---------- Post added at 11:38 AM ---------- 6 hour anti-bump limit - Previous post was at 11:37 AM ----------

Hard to find. The last one i had from CVkit, it wasnt the right size. So after a while, the tube open up, leaving the aircon tube expose....Anyone knows where got shop or aircon shop that sells this?

goto home aircond installer..they probably give you for free....thats how i got mine :p

 

[marv3]

goto home aircond installer..they probably give you for free....thats how i got mine :p

Is there any in PJ area?

 

[vr2turbo]

Hard to find. The last one i had from CVkit, it wasnt the right size. So after a while, the tube open up, leaving the aircon tube expose....Anyone knows where got shop or aircon shop that sells this?

Not the right size? You wrap the aluminum hose or rubber hose? For Aluminum just nice, rubber hose no need wrap...

---------- Post added at 01:15 PM ---------- 6 hour anti-bump limit - Previous post was at 01:14 PM ----------

goto home aircond installer..they probably give you for free....thats how i got mine :p

Those we are using are for house air con ones......lol

 

[marv3]

Not the right size? You wrap the aluminum hose or rubber hose? For Aluminum just nice, rubber hose no need wrap...

My pipe is bigger la (sounds damn wrong). So the hose i need to get a bigger diameter so can wrap my pipe nicely (sounds damn wrong again)

 

[vr2turbo]

Conti ones bigger.....sound correct to me......hhahahhahahhahah

 

[marv3]

Conti ones bigger.....sound correct to me......hhahahhahahhahah

So....Does anyone know any aircon shop around PJ area? With various sizes hose??

 

[cvkit17]

So....Does anyone know any aircon shop around PJ area? With various sizes hose??

Bro maybe u can google air cond repair shop near PJ

 

[vr2turbo]

Bro maybe u can google air cond repair shop near PJ

Not only repair but actually should be air con installer......

---------- Post added at 04:58 PM ---------- 6 hour anti-bump limit - Previous post was at 04:57 PM ----------

So....Does anyone know any aircon shop around PJ area? With various sizes hose??

Used to have 2 shops near my house, but got to check. One already shifted the other I am not sure..

 

[sanekit]

Done wrapping my hose!

Got the insulation tube from a 2nd hand aircond shop at ss14 subang jaya for rm3. Hehe