3 Max strut bars
- Thread starter boyzone
- Start date
- Replies 77
- Views 15K
-
See what others are reading now! Try Forums > Current Activity
yeah.. You should get it. the 3maxx dealer are at Puchong. last time I got their website and contact. now lost already..
http://www.3maxauto.com/3max.htm
I see got carbon fiber strut bar from 3max also. Some more the 3max bar look like price increase already. last time i see cost Rm80 for the fender bar for iswara while now already Rm140.
http://www.3maxauto.com/3max.htm
I see got carbon fiber strut bar from 3max also. Some more the 3max bar look like price increase already. last time i see cost Rm80 for the fender bar for iswara while now already Rm140.
Last edited:
just grab it..
need to call and pos to me ..
Besides, I hear from some saleman regarding on the strut bar precision.
we might not fix the bar if the bar precision is out, especially on front 4 points lower arm bar..
So how is 3 max precision work? are they precise?
Besides, I hear from some saleman regarding on the strut bar precision.
we might not fix the bar if the bar precision is out, especially on front 4 points lower arm bar..
So how is 3 max precision work? are they precise?
mostly is very precise, but just have to consider that if ur car is way too long on malaysia road, mostly the alignment will be out a bit.
not the product's fault, but blame the gov....& sammi vellu.
aiyo..all local made bar look alike....all white color n same design.....copycat huh....
try to design something different le....R&D dept should see those famous brand like Cusco,Nismo....etc how they design.
if the bar if too low in price, i doubt the quality level.
so far, i only use Cusco.it looks more solid to me
try to design something different le....R&D dept should see those famous brand like Cusco,Nismo....etc how they design.
if the bar if too low in price, i doubt the quality level.
so far, i only use Cusco.it looks more solid to me
Actually, compare with aerospace grade's alloy, material cost for high tensil steel is much much cheaper. People salling expensive is because for better profit margin.
Besides, self design and mfg, will reduce down material cost to the minimum as well.
For my point, go for those bars are because of the bar function to gain better handling fun but not to improve on car safety or what. Once over speeding, I dun think those bars can help much unless we go to full rollcage.
correct me if I'm wrong.
Besides, self design and mfg, will reduce down material cost to the minimum as well.
For my point, go for those bars are because of the bar function to gain better handling fun but not to improve on car safety or what. Once over speeding, I dun think those bars can help much unless we go to full rollcage.
correct me if I'm wrong.
I visited 3Max factory today and installed a 4-point-under-arm-bar for my Iswara.
I would say they are professional in manufacturing these bars WITH precisions. A trained eye whom are in the field of CNC Machining Industry will tell how good is 3Max's products. They have been manufacturing alot of CNC-ed metal/alloy/CF products loooong way before anybody does.
About the bearing story of the saga strut bar, is pretty simple. The salesman gave the WRONG bar to the buyer and installed it. He took the wrong strut bar meant for SAGA1 (Old Saga n Iswara) , and installed into the new SAGA2 (LMSS/LMST) which the suspension mounting bearing differs by half inch!
I am in the field of CNC engineering machining for 2 years, so I would say, see for urself before judgements are made.
COPYCATS ? comon! everyone is a copycat ! its about copying something, enhancing it for the better, and hell yeah! this is a real world, who is the best, who will survive. Simple as that!
I would say they are professional in manufacturing these bars WITH precisions. A trained eye whom are in the field of CNC Machining Industry will tell how good is 3Max's products. They have been manufacturing alot of CNC-ed metal/alloy/CF products loooong way before anybody does.
About the bearing story of the saga strut bar, is pretty simple. The salesman gave the WRONG bar to the buyer and installed it. He took the wrong strut bar meant for SAGA1 (Old Saga n Iswara) , and installed into the new SAGA2 (LMSS/LMST) which the suspension mounting bearing differs by half inch!
I am in the field of CNC engineering machining for 2 years, so I would say, see for urself before judgements are made.
COPYCATS ? comon! everyone is a copycat ! its about copying something, enhancing it for the better, and hell yeah! this is a real world, who is the best, who will survive. Simple as that!
so, what made u switched to singing??... childhood dreams??...:hmmmm:
Bro, thanks for bring up this point..
Later will sms to the authorize dealer and make a deal.
When I work, u still playing starcraft.....what do u know about CNC machining, mr.anakin ?
uncle... apparently i dont play starcraft... and i know nothing about cnc machining... i'm still small boy mah, jz learn ABC and 123 only...
Similar threads
The Marketplace Latest
Posts refresh every 5 minutes
What brand is this? g logo with a line across it.
According to tyre shop, its a Jap rim. Feels light and has M.I.Japan at the back
According to tyre shop, its a Jap rim. Feels light and has M.I.Japan at the back
Recent Posts
-
Tire Price list Zth
- Started by xbalance2002
- Wheel And Tyre
Search
Enjoying Zerotohundred?
Log-in for an ad-less experience