Review: Everco race exhaust + remote controlled valve in our Clio 4 RS

Tom

TIMETOATTACK
Helmet Clan
Joined
Jul 6, 2000
Messages
5,565
Points
5,213
Location
Kuala Lumpur
Next up, is our feature story on Everco's custom exhaust system with remote actuated valve for sound switching



This is how a custom exhaust looks and sounds like on our Clio RS. Built by our project car partner Everco, a renowned exhaust specialist that was established a couple of decades ago with focus on OEM applications. More recently known for their expertise within the aftermarket performance world, Everco has emerged as the go-to shop for bespoke stainless-steel exhaust for all performance cars.

I hope you enjoy our video review of this brilliant exhaust system and the photos below

Everco's Facebook Page: https://www.facebook.com/everco.bhd



Of late, Everco has since diversified their business from just pure exhaust solutions where they now offer aftermarket tuning for Euros. This includes anything from a simple oil service, to ECU flash, water methanol systems, to full fledged power upgrades.

A partner on board http://www.timetoattack.net Series (TTA), our very own flagship circuit event based in Sepang Circuit where lap time is of the essence, Everco has in multiple rounds of TTA emerged champions via a handful of their tuned euro creations. Many of them in the form of track biased Audi TT-S and VW Golfs.

Everco trumped the charts at TIMETOATTACK Round 1 April 2015 with a blistering 2:27.250 in their very own Audi TT-S (right) driven by none other than their man in charge, Kingston.



The magical item that makes Everco's exhausts boom, pop and crackle on demand. Their valvetronic remote actuated exhaust valve that turns a race exhaust into a street exhaust at the press of a button.



Here's a closer look at their work. Clean welds and on top of that, water jet-cut connecting flanges ensures top quality physique and a perfect leak-less seal.



The full turbo-back system on our 2015 Renault Clio RS 200 EDC comprises:

  • Turbo downpipe
  • Primary and secondary catalytic converters deleted
  • 2.5" stainless steel plumbing
  • Stainless steel mid box
  • Stainless steel rear muffler with 2 exits
  • Everco Valvetronic remote actuated exhaust valve
  • Valvetronic Remote Control
  • Exhaust exits via a single outlet (left) when valve is open
  • All flanges are water jet cut
  • All bends utilize mandrel bent elbow pipes

This complete system on our Clio RS 200 EDC is priced at: RM6,800.00



A flexible joint from after the turbo-downpipe



Rear diffusser shrouds the view where the rest of the plumbing leads to the rear muffler



It has been months since and our stainless plumbing is now heated gold to perfection



Always a mesmerizing experience looking at perfectly welded joints



Here's another look at the Everco's Valvetronic actuator



Have to say the Clio RS 200 has got cool almost-flat underbody and a rear diffuser

Everco Motorsports Contact Details:

 
Weldings are good man......I was planning to go to Everco to custom my exhaust for quite some time, just not enough moolah :P
 
High end, good welding comes with good price, but what you pay is what you get......:driver:
 
Got to say they are some of the best in town. Even their flanges are water jet cut. I think the result here is that it feels and looks like factory intended.

Remote valve is also an excellent toy to give the car 2 driving modes. Quiet in the day and full noise on a weekend drive

6uest: unfortunately no dyno was done after that

Sent from my SM-N9208 using Tapatalk
 
Is Kingston still running the show there?

That's one helluva nice exhaust
 
I did my Wira's complete exhaust when Kingston was still the 'management trainee' way back then. Front to back 'white steel' with 2" piping. Gone are the days exhausts like that cost less than 2k.

Damn inflation
 
I did my Wira's complete exhaust when Kingston was still the 'management trainee' way back then. Front to back 'white steel' with 2" piping. Gone are the days exhausts like that cost less than 2k.

Damn inflation

I haven't personally to see Kingston on the pricing for mine but I did ask a competitor and the cost was :bawling:

Easily 4k plus and that was then pre-GST rates :(
 
I haven't personally to see Kingston on the pricing for mine but I did ask a competitor and the cost was :bawling:

Easily 4k plus and that was then pre-GST rates :(

White steel? Like I said - damn inflation!
 
Nope....it's stainless steel mandrel bend
Downpipe 3" to piping plus one midbox and one muffler 4k plus
If turbo manifold.....add in another 1.3k

Turbo manifold (banana) for 1.3k gone up slightly, used to be 1k....:biggrin:
 
I haven't personally to see Kingston on the pricing for mine but I did ask a competitor and the cost was :bawling:

Easily 4k plus and that was then pre-GST rates :(

Nope....it's stainless steel mandrel bend
Downpipe 3" to piping plus one midbox and one muffler 4k plus
If turbo manifold.....add in another 1.3k

That was pre-GST, now......even more expensive :thefinger:
All 304 stainless steel marketing kao kao
I see also :hmmmm:

Phew, can buy a turbocharger for that price. Crazy price, or maybe I'm just too poor and not yet that level of consumer. :bawling:
Which shop? Super Circuit?
 
Phew, can buy a turbocharger for that price. Crazy price, or maybe I'm just too poor and not yet that level of consumer. :bawling:
Which shop? Super Circuit?

Yup Supercircuit
Everco not sure yet as I will need to meet up with Kingston to check on the vehicle then only can get a price
 
Ask quote from another few places before deciding. Bro. marv3 went to Jian Hang....http://www.zerotohundred.com/newforums/showthread.php?t=225569&page=13
 

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience