Wira SE 1.5MT

[sn_ting]

my volker iridium spark plug was burn after 20k. they claimed that the 1st batch actually got problem then they changed it all for me FOC.

I was driving from BU to Puchong when it burned so i have no choice to change to BORCH Super4 but straight away i found that spark plug not power enuff as compare to Volker Spark Plug.

I've been using the 2nd Volker IridiumSpark Plug for 30k now. so far no problem with the 2nd batch one. I did took it out during my last service and the spark plug was still in very good condition.

i dunno where to find the front lip coz last time when mine one kena stolen i was damn angry so i go and steal other ppl one and now i locked it with screw.

 

[sn_ting]

for me...i use platinium spark plug...don`t dare to use Volker due to my engine now runing abit lean liao...scared kabooom..haha

y are ur engine running lean?

 

[seanlee]

y are ur engine running lean?

coz my car...engine modded with PNP...with 1.8TB..

 

[seanlee]

what kind of problem faced by volker? can u share? recently my front lips lost it small portion (that attachble part la) must be dropped somewhere. any suggestion where can get one new with cheap and good quality one? dont say proton svs centre lah...wont come cheap, lah.

oso anywhere can repaint - good workmanship and good price, lah brader...got scratch here and there.

the front lips you can get in in Mutiara SC....is about RM 50 only.

 

[Izso]

sean, so cheap? Ori or PU or fibre?

 

[charlie saint]

dont use bosch la, what ever model it is, 4 head ka, single head ka, got the info that bosch got problem in every batch...meaning that there will be 1 kong in every 4 spark plugs. and yes, platinium is much better than the bosch.

dunno what u mean by "engine running lean" coz i never feel staisfied with mine as its vibrate like hell and so shameful it is almost feel like an iswara. you can feel the steering wheel GEGAR during idling and stationery. dunnjo whether it is the bushing or what else, but, for now, i just ignore it...as long as it can move without burdening me so much, then kira ok lah.

sori la brader, what is PNP? not so good in terms, la...the front lips, RM50 for the whole lips or the replacable part only? i wanted to steal but kesian la, if that guy oso facing the same problem with us. i tot mine was oso stolen la...any suggestion o alternative and prettier front bumper/spoiler?

 

[seanlee]

Rm 50 just for the small piece thing only...not the whole lips.....original you can get around RM250 without paint from Mutiara SC...

PNP...as in port and polish....

 

[charlie saint]

oh ho like that, how much u spent on that and the 1.8TB - what brand? how does it differ from the ori one?

what else to do to lighten the engine and make it run smoother & not feel so heavy..

 

[seanlee]

oh ho like that, how much u spent on that and the 1.8TB - what brand? how does it differ from the ori one?

what else to do to lighten the engine and make it run smoother & not feel so heavy..

well...SGTI 1.8 TB siemens..cost me RM 150 with my hose together...
then PNP..cost me RM 850.....

which mean ...my car build more torque thn normal...ofcourse...HP increase as well..

so ca rmore torque means press less....something like Tekan Jalan...

 

[sn_ting]

dont use bosch la, what ever model it is, 4 head ka, single head ka, got the info that bosch got problem in every batch...meaning that there will be 1 kong in every 4 spark plugs. and yes, platinium is much better than the bosch.

dunno what u mean by "engine running lean" coz i never feel staisfied with mine as its vibrate like hell and so shameful it is almost feel like an iswara. you can feel the steering wheel GEGAR during idling and stationery. dunnjo whether it is the bushing or what else, but, for now, i just ignore it...as long as it can move without burdening me so much, then kira ok lah.

sori la brader, what is PNP? not so good in terms, la...the front lips, RM50 for the whole lips or the replacable part only? i wanted to steal but kesian la, if that guy oso facing the same problem with us. i tot mine was oso stolen la...any suggestion o alternative and prettier front bumper/spoiler?

some said the car vibrate because of the timing is too low...try to clean the TB..i think it will help...

for bumper...i like the promote with air difusser ...

 

[charlie saint]

sean, sgti 1.8 TB if installed in wiSE, does need to ejas a bit on tuning or just plug n play?

 

[seanlee]

sean, sgti 1.8 TB if installed in wiSE, does need to ejas a bit on tuning or just plug n play?

yes...it need calibrate with ECu

 

[sn_ting]

sean...i tot the WiSE ecu cannot touch one?

 

[seanlee]

sean...i tot the WiSE ecu cannot touch one?

ECu cannot touch..but some Tb learning can be adjust abit..

 

[charlie saint]

sean, anywhere particular in TB adjustment. i know this one guy in batu 3, shah alam, he said he can do it, he even got his demo car for testimony!

saw him won 3rd place in batu kawan few years back using standard ekzos! h convert wira 1.3 to 1.5...with some blue printing on the engine...

 

[charlie saint]

recently my radiator fan produce loud noise. when i check with a fren at proton edar, he said "which radiator brand u r using?"...wah like that means so many brands in one car model and our WiSE become UNIQUE from one another....troublesome to find spare part oso!

 

[seanlee]

sean, anywhere particular in TB adjustment. i know this one guy in batu 3, shah alam, he said he can do it, he even got his demo car for testimony!

saw him won 3rd place in batu kawan few years back using standard ekzos! h convert wira 1.3 to 1.5...with some blue printing on the engine...

i think that should be MMC....not siemens...coz...i`m holding the PDT2000 doing tune for my self...whole day...can`t brake true...andyet...after i do setting on high rpm,....coz what?.....i took out the positive terminal from battery..then wait for 15min....and the put it back......then already back to normal...even after i set by PDT2000...all gone.

 

[charlie saint]

thats what i face during my early days using WiSE. even when doing the tuning at the authorized proton edar and eon dealer, the result is still the same...like no tuning at all, but they still charge RM100+++ for TB cleaning and "tuning". then i go to my fren in shah alam, clean all those thingy and guess what he said? "just clean up the TB, the siemens system cannot be adjusted" but at the end of the day after so many cleanin done, the TB need to be changed, totally!

where to get good SGTi spare parts for our WiSE?

 

[sn_ting]

charlie saint: how often u clean ur TB? how come so fast rosak one?wat's ur mileage?

 

[seanlee]

thats what i face during my early days using WiSE. even when doing the tuning at the authorized proton edar and eon dealer, the result is still the same...like no tuning at all, but they still charge RM100+++ for TB cleaning and "tuning". then i go to my fren in shah alam, clean all those thingy and guess what he said? "just clean up the TB, the siemens system cannot be adjusted" but at the end of the day after so many cleanin done, the TB need to be changed, totally!

where to get good SGTi spare parts for our WiSE?

luckyly..i didn`t pay anything for using..the PDT2000...hahaha

siemens part actually..hard to get from chop shop in good condition..coz..normally..siemens part can last longer then MMC...