Today we Installed Snow Performance - Methanol/water injection boost cooler in my car which is wira 1.5M and below are some of the installation stage photos
1. Methanol/Water tank and the pump is placed at the boot and custom made bracket to hold it properly to avoid any movement while driving.
2. Arrangement of the fuel line and the wiring to be laid from the boot till the engine bay as below
3. Fuel line in engine bay and wiring almost complete for the injector
4. Injector is installed and tested at the air intake
5. On/Off switch installtion, boost signal wiring (usually an LED will light when the boost and the pump works) but for my car since im using evo dashboard, i just connect it to my dashboard meter to my turbo light (so when the pump boost the turbo sign will light on)
6. after this, we are done below are photos of completed installation: