Proton 4G13/4G15....Satria/Wira/Saga

[wira4g13p]

u need...

1. increase cc from 1.3l to 1.5l
2. street cam + adj cam pulley
3. good clutch (1.6 supertouring) + lighten flywheel
4. port n polish
5. tuning carb..but i dont know about tuning carb possible weber...hahahaha

 

[Ijad Jack]

hi...
im using satria 4g13...
already installed extractor 421 for rm200++
some how i can feel it isnt powerful as the ori(manifod) one...
anyone can explain?
:hmmmm:
pleaase

 

[Shinjite]

what are the things to do? would apreciate alot if anyone list it out. ^^

You definitely need to up your displacement to 1.5L + PNP and cams and tuning for this one

 

[R3UB3N]

Hey guys, i recently bought a 2nd hand wira 1.3 n it is miserably n utterly underpowered.. now i'm thinking of changing the engine.. may i know wat engines are compatile with a wira chassis n also how much it may cost.. i'm looking for engines in the 1.6 to 1.8 range... thnx

 

[lyordson]

You definitely need to up your displacement to 1.5L + PNP and cams and tuning for this one

wow.. kinda pricey for that.. how much usualy cost?

 

[tofu_manic]

2xxx-3k, depending on which cam brand n where u do ur port/polished head

still need a 1.5 block for the larger displacement

 

[Viera Sasaki]

Hello... I've got a few question to ask:

1) May I know the stock diameter/size for Wira 1.5I exhaust piping?
2) I would like to upgrade my current exhaust system but is it true that the bigger the size of the piping, the worst-er the FC will become? I always traveling from KL to Perlis almost every week, so I don't want my car to become a fuel guzzler.
3) What brands/types would you recommend for an open pod air filter? Is HKS green mushroom one is better?

Thanks for the help. (^_^)

 

[meltan7]

Hello... I've got a few question to ask:

1) May I know the stock diameter/size for Wira 1.5I exhaust piping?
2) I would like to upgrade my current exhaust system but is it true that the bigger the size of the piping, the worst-er the FC will become? I always traveling from KL to Perlis almost every week, so I don't want my car to become a fuel guzzler.
3) What brands/types would you recommend for an open pod air filter? Is HKS green mushroom one is better?

Thanks for the help. (^_^)

ilmi,

1) diameter should be around 1.4-1.5 if i'm not mistaken.
2) that statement is sort of true, in your case, just opt for 1.75 inch for the piping. exhaust wise, nothing more than 2.0 inch.
3) if you're running on auto tranny, stick to drop-in air filter. if manual, you could try K&N open pod with the cold air intake.

---------- Post added at 03:46 PM ---------- 6 hour anti-bump limit - Previous post was at 03:45 PM ----------

2xxx-3k, depending on which cam brand n where u do ur port/polished head

still need a 1.5 block for the larger displacement

bro, any workshops you'd recommend for PnP?

 

[tofu_manic]

i dunno...i got maddriver to do mine

the reputable ones for 4g1x are matspeed/powerzone

nasty portworks or sumthing like that is reputable as well

 

[Shinjite]

Mel, if you plan to PNP, just do it 1 shot and max out its flow
Avoid those Stages crap

 

[weikhee86]

Anyone with Satria 1.3 stock extractor for sale? Looking to buy one please contact me if you have. Also looking for Satria 1.3 stock muffler

 

[gomez]

Hi, i have one stock extractor satria 1.3 for sale. Pm me ur offer tq :)

 

[weikhee86]

I bought the stock extractor already now looking for stock muffler. Anyone looking to sell? Please PM me if you have, along with photos if possible and expected price for the item. You can also text me at 016-8988567 for quicker deals. Thank you.

 

[saweet999]

so these engine swap like to 4g15, 4g91, 4g92 + stroker kits will be approved by jpj? from what a friend of mine told me is that if your cc increase by 30% and not more then jpj will approve. he has a ke20 with 1.6l 4age 20v and an iswara with 2.0 vr4 turbo

 

[sunsun1234]

HP Unveils New Notebooks for Pros and Consumers

-Not appropriate/relevant-