4G93T Club

[contreasjun27]

hahaha.. 1.8mm metal gasket can boost at how many bar ? and 1.5mm ? .. pls teach newbie ..! hehe

whats the hassle guys..
get lah MMC 2mm metal gasket..
easy as that...LOL argue for what haha

 

[badturz]

Aiseh! .. i didn know got mmc 2mm .. i never go survey.. darn!! i just changed to 1.5mm metal gasket.

Btw, anyone pls help me /? ,, haha 1.5mm gasket can boost how many bar max? .. haha

 

[sbirdz]

contreasjun27 - wahahah! . okay .. i try to be there... ! Final exam tomorrow. ! after exam continue mod..! hahaha!

haha you got me my dear friend

Bro Badturz and Contreasjun27...

:)

Thanks for your supports in the past.. well, i don't wanted to create another long thread here.. But from the whole big gathering.. until now it becomes petitioning... and finally... I can say... I am lucky to be alive... and i am so close to... entering bars...

Well, anyway... thou i have lost myself in the past few days.. with these dissapointments and also shocks.. I should be able to find back myself soon... and i really learned something very very important regarding petitions here...

 

[contreasjun27]

Aiseh! .. i didn know got mmc 2mm .. i never go survey.. darn!! i just changed to 1.5mm metal gasket.

Btw, anyone pls help me /? ,, haha 1.5mm gasket can boost how many bar max? .. haha

1-1.2 bar no problem actually with proper fuel management bro...
2mm metal gasket my friends car can hit 1.5 bro

 

[normality78]

guy's,
how difficult to mod b8 conrod to fit 4g93 crank? With B8 rod and piston, will it able to withstand 250whp? How about CA18 rod?

 

[contreasjun27]

guy's,
how difficult to mod b8 conrod to fit 4g93 crank? With B8 rod and piston, will it able to withstand 250whp? How about CA18 rod?

i got CA18 conrods for sell bro...pm me if u interested bro..
dont need B8 piston straight get toyota supercharger piston better dude

 

[normality78]

why is gze piston better thn b8? i choose b8 due to its 83mm and i dont need to mod the piston to fit rod. If i get CA18 rod, i will still need to mod the rod to fit B8 piston. right?

 

[dlj9788]

to all the kind and generous zerotohundred forumers, i have an Evo 3 airflow and a GSR ecu for sale. both item sell at RM1000. item can be sell in seperate but will buy much expensive, airflow is RM 600 and ECU is RM 800. post can be arrange and will be charge the buyer for post fees. reason for sale, already upgreade to microtech. can pm me or just sms me at 0168481813 (DANNY). Thanks

 

[badturz]

Hey help me pls..if i am using Td05 but without changing the injector and there is fuel regulator. will it perform well?

 

[wft6184]

of course it will. just dont boost too high.

 

[clanzkiller]

badturz, if u're using stock gsr injector and changing to bigger turbine, u stil can run your machine, but at the case that u will not maximize the power of the turbo due to insufficient fuel supply, maximize as the meant of fully utilize the power...example like td05, usually ppl wil boost on 1.2bar with own preference in malaysia..higher octane fuel can boost further, in AUS, ppl using td05 for 2.0bar (pls refer to AUS forum discussion)..if u force, and u might as well know the consequences of it...

i heard from my fren that, is better to just use 80% of your total injector compatibility to support your fuel supply...is like, u bought a 500cc injector, 500cc of 80% = 400cc...so if td05 required lower than 400cc injector, u can as well use the 500cc injector, otherwise u have to get higher cc inector..

 

[badturz]

thank for the info clanzkiller. Hrmm .. hrmm..

 

[chrissyong]

Hey help me pls..if i am using Td05 but without changing the injector and there is fuel regulator. will it perform well?

fuel pump need upgrade for safety,of course u can keep your original fuel pump and add 510cc evo123 injector for your engine,only is fuel pressure not so stable only,please change your fuel pump for safety~

 

[badturz]

chrissyong - Thank for helping. but i had changed walbro fuel pump, td05, hks filter, fuel reg,
due to the budget tight. really tight edi.. haha.. so it can boost at 1.2 bar right? without problem? ..

coz some hidden cost occurs such as installation fees .. i didn expect what will be the price and lack of one set injector only. haahaa..

 

[chrissyong]

chrissyong - Thank for helping. but i had changed walbro fuel pump, td05, hks filter, fuel reg,
due to the budget tight. really tight edi.. haha.. so it can boost at 1.2 bar right? without problem? ..

coz some hidden cost occurs such as installation fees .. i didn expect what will be the price and lack of one set injector only. haahaa..

don over 1.2 bar with td05,if your 4g93t internal is stock,if want hi boost like 1.5bar or 2bar better have arp head stud~or evo head stud,good luck