4g67 turbo..

[goo_61t]

wakakakakaka..neway gud luck with ur project bro..400hp beast in the making

 

[owndferra]

Wish me luck..huhu

 

[normality78]

DON'T RACUN2 ME LAA..IF I DIE THEN,WHO WILL PROCEED MY PROJECT??WAKAKAKA

whahahaha... best statement of the year.

but seriously bro, those big name shop like ksp and ss racing folks can do courier service. otherwise, u can purchase thru local workshop.

why dun u create a shop list, go KL and get once for all

 

[RS gang]

yup..good idea....
make a list..then shopping lorr.....ekekeke

 

[eci4ever]

If u have budget constraint like me..
i've collected the item one by one untill complete.. hehehe

 

[Trinityblood]

If u have budget constraint like me..
i've collected the item one by one untill complete.. hehehe

thight budject its ok bro...as long as ur project done edi...hehe

 

[eci4ever]

thight budject its ok bro...as long as ur project done edi...hehe

heheee.. Currently running smoothly. Luckily for me i got the halfcut that already have several modified item like Air filter, BOV, plug cable and several meters.

to owndferra
Better start ur project as soon as possible.. Syoookkk wwwoo driving 67t... hehehee

 

[RS gang]

heheee.. Currently running smoothly. Luckily for me i got the halfcut that already have several modified item like Air filter, BOV, plug cable and several meters.

to owndferra
Better start ur project as soon as possible.. Syoookkk wwwoo driving 67t... hehehee

hahaha...now u know the syiokkk...ekeke :)

p/s - hv u get the timing belt cover..?

 

[owndferra]

ok assume that i know nothing bout 4g67 turbo mods and i got budget with only rm10k..
target hp is about 280hp-350hp..what should i done 1st the step by step modification?

assuming my engine:

4g67 1.8
standard vr4 ecu
vr4 injector
hks mushroom type air filter

so guys, what should i do??

p/s:my mech always ask me to changed to evo3 but i don't want.i want to explore the max capabalities of my 4g67 engine.















/

 

[eci4ever]

hahaha...now u know the syiokkk...ekeke :)

p/s - hv u get the timing belt cover..?

yeah... oredi got it, slightly diff with evo right...
the cover come from engine with red color head...
many shop reluctant to sell it, but i manage to get myself one... hehee

For the time being, i do not dare to floor pedal at gear 2,
i'm only use 15' rim. A lot of spin...huhuhu...

 

[eci4ever]

ok assume that i know nothing bout 4g67 turbo mods and i got budget with only rm10k..
target hp is about 280hp-350hp..what should i done 1st the step by step modification?

assuming my engine:

4g67 1.8
standard vr4 ecu
vr4 injector
hks mushroom type air filter

so guys, what should i do??

p/s:my mech always ask me to changed to evo3 but i don't want.i want to explore the max capabalities of my 4g67 engine.

I would suggest.
remain the block,
anything else, go for evo3.

 

[goo_61t]

DONT go for evo 3,stick with 67 bottom end..then plug in all other evo3 items such as head,turbo,ecu + wiring + airflow + injector with gud tune the 16g should get u around 320HP.16g is capable for that figure dun worry.last time my 16g with 0.6 boost get me to 245HP on wheel dyno tune by joshua millenium.That was on low boost coz i just finish my engine fresh install in running in mode still.That was with mirage 61t ecu + 560 evo 6 injector.

 

[owndferra]

roger that...

 

[eci4ever]

yup.. good suggestion too by goo_61t.
the cost may reduce by doing that way.

 

[HDTmotorsport]

look tis topic more interesting..
can i join?
but i'm using 4g61 bolt on turbo hehehehe

 

[goo_61t]

welkam..welkam..vanekem hahahaha hepi depavali

 

[normality78]

initially i think owndferra know what he wan and what to do. He must be damn mixed now after soo many input and option he can do. whahahahaha....

 

[goo_61t]

short cut with 10K
enjin kosong evo3 - rm2K(max) could be lower
turbo - rm1.2K(with manifold)
injector - rm300
ecu + wiring + airflow = rm1.3K
block preparation(rebore + balancing + new bearings) - rm2.5k(approximate)
arp head stud - rm 450 - 500
head gasket - rm250(maximum mmc metal)
intercooler + piping + ekzos = rm1.5k
and other minor2 stuffs = rm1.5K
total =rm11050

 

[goo_61t]

but if i were u.i'd stay with 4g67 head to raise the compression a bit then go for vr4 piston or after market piston gud for fast spool-up on the turbo. save u alot,no need to buy enjin kosong.Just go get piston vr4 around 200-300 only.

 

[xcheong]

but there's still alot of things dun have if rojak like wat u said.

might as well buy entire evo 3 halfcut, then only build wif 4G67block.

don't forget that u still need the e3 lsd gearbox (which u missed out in your 10k recipe)

vr4 piston, vr4 oil pump and vr4 flywheel also needed for the 67block.
also needed VR4 starter. just buy this few stuff already cost like 1k liao.

oil squirter can be savage from evo 3 block.
everything else just use back evo 3...