I'm just in the process of starting my 2L B-Series build project and want to share with fellow ZTH members and friends to gain as much feedback and tips as possible to improve my build. I'm still awaiting quite a few parts and pending confirmation of some parts that i may need or use. So as I build, I will try to post as much info and pictures as well. :regular_smile: As mentioned in earlier post, I'm now trying to share as much infos as possible unlike the old days where people want to keep everything secret. hehe.. Unless i'm told not to reveal certain things from people who are helping me in this build, all should be said and shown as much as possible.
Just a list of items i have on hand.
Sleeved B-Series Block
B18C Knife-Edge Crank
CP Forged Piston 85mm 11.5:1 (might be changing this for higher comp)
J's Racing Throttle Body 70mm taper to 64mm
J's Racing Fiber Intake system with Pipercross Viper Carbon CAI Filter
J's Racing Baffled Oil Sump
DC Sport 4-1 JDM Race extractor with 2.5" collector (might need bigger Tri-y extractor if it restrict too much flow)
RC Engineering 310cc injectors
Hondata S300J in JDM P72 ECU
Hondata Intake Gasket
PLX Wideband
ATS SuperSingle Clutch
List of items pending:-
Stock head awaiting a mild port job
Intake Manifold awaiting a clean up and mild port too
Forged I-Beam rods still waiting to buy?
Valvetrain will wait till i know my exact built and compression and rev range i want?
Thats all i can think now. :Not_Impressed:
This build i'm not trying to target crazy HP or REVS.. Just strong useable power and as flat torque as possible and hopefully with good reliability.
This build project will probably be taking 3-6 months or maybe even more depends on the budget and availability of parts.
Chris
Just a list of items i have on hand.
Sleeved B-Series Block
B18C Knife-Edge Crank
CP Forged Piston 85mm 11.5:1 (might be changing this for higher comp)
J's Racing Throttle Body 70mm taper to 64mm
J's Racing Fiber Intake system with Pipercross Viper Carbon CAI Filter
J's Racing Baffled Oil Sump
DC Sport 4-1 JDM Race extractor with 2.5" collector (might need bigger Tri-y extractor if it restrict too much flow)
RC Engineering 310cc injectors
Hondata S300J in JDM P72 ECU
Hondata Intake Gasket
PLX Wideband
ATS SuperSingle Clutch
List of items pending:-
Stock head awaiting a mild port job
Intake Manifold awaiting a clean up and mild port too
Forged I-Beam rods still waiting to buy?
Valvetrain will wait till i know my exact built and compression and rev range i want?
Thats all i can think now. :Not_Impressed:
This build i'm not trying to target crazy HP or REVS.. Just strong useable power and as flat torque as possible and hopefully with good reliability.
This build project will probably be taking 3-6 months or maybe even more depends on the budget and availability of parts.
Chris