Titan Suspension for A32

[edgar_raphael]

Just interested to find out how many of you here has Titan suspension in your Cefiro? Can you share the specification with us? And how much would it cost?

Not sure if A32 and A33 is going to share the same specification but I guess not as they will weight differently between the 2 of them?

And how would you rate them in terms of comfort and look? How much lower did you go?

Please share, as I wish to get one as well, but I need it off-the-shelf.

 

[Madrocky]

A32 & A33 doesnt share the same specification. Only A33 & A34 share the same specification.

Titan suspesion will cost RM2.8k. For the product purchase, it have 2 years limited warranty. If i not mistaken, u have 3 chance to change ur suspension setup.

The rate of comfort is good compare to other local suspension brand. The handling i can say it is smooth. If u want smooth and good handling, try to go for front 6.5kg/mm & rear 6kg/mm.

For the absorber stroke, if i not mistaken.. they are using rally type of stroke and it is thicker than other brand such as HKS, Cusco & etc.

For custom making ur car model of suspension, u need to make an appointment and for customing the suspension and installation juz need around 1 day.

 

[ongteckweng]

ed, im using titan as well. actually there is only 1 diff between a32 n a33, the front absorber screw hole. the rest its the same. u can use the rear from a32 for a33. but the front is different.

they r using monotube for the absorber. its really great compare to oem n other aftermarket brand. they response very well even with 18" rims.

i bought them used (6 months old) for rm2k. but its for a33. so what they do is they redrille one of the screw hole to fit my a32. no prob according to the owner n he even give me 2 year warranty. if not happy, 1 to 1 exchange.

im using 6kg/mm for front n rear. the front feels good. comfortable yet i am able to attact corners easily. body roll is minimal. however, for those who like it to be firmer, i suggest 7kg/mm for front n rear.

michael, ed is from australia. so dont think he can send his car to the shop. what u can do is, let us know what u want, the spec etc and we can help u to get them from titan themself. then just courier it to u. however, if u wanna claim warranty etc, it will be a hassle.

anyway, we have a member who has been using them for almost 2 yrs now n still enjoying it every minute of it. u can try.
as mad mentioned earlier, its rm2800 for new set. i am not sure how much the postage going to cost u but be prepared to pay at least few hundred bucks (im RM) coz they r heavy!

 

[edgar_raphael]

yeah I understand, that is why I need advise from those who actually have experience with titan in their A32 so that way, I can copy the same exact specification that I can ordered directly.

I have read around the forum and there seems to be different specification on the spring rate for both A32 and A33. I noticed they use higher spring rate for A33 as compared to A32, but for now, if I want comfort, I should go 6kgmm front and rear?

Does anyone have any experience what 6.5kg/mm front and 6kgmm rear would handle in A32? And how much lower did your A32 go?

 

[ongteckweng]

as for the stand, it depends on u mate.
mine is around 1" gap between the mudguard n my tyres. its low enough for me coz if i go any lower, my front skirt will kiss the road everytime i park my car in my home.

u can go lower (like 1cm gap) but i am not sure hows the ride comfort. in theory, it should be the same.

 

[edgar_raphael]

usually, you cannot use the gap between your wheels and your fender arch as measurement, as different tyres and wheels application will affect the measurements of the gap, eg. larger diameter wheels will fill up the arches more, despite bringing the car's height up, because the area between the hubs to the bottom arch has been filled up by the wheels.

So to really measure the height, the best way is to measure from the arch down to the hubs. Anyway, nothing is worse than in Australia, we have to drive over the 'dip' to get to our driveway :) , I couldn't be bothered to fit an aftermarket bumper/lips because it is simply not practical at all for me as I drive the car everyday.

The price tag of rm2800 is including fitting and tunig am I right? Can they do a better price just for the set alone? I am pretty sure they can.

 

[ongteckweng]

im not sure if they r willing to sell any lower. last time they wanna increase the price to rm3000 but backup after customers complaining...

u can try ur luck...

 

[edgar_raphael]

anyone knows if A33 springs are the same as A32?

 

[ongteckweng]

anyone knows if A33 springs are the same as A32?

in theory, they should be the same...as i mentioned earlier, the only diff between a32 n a33 suspension is the front absorber top screw mount.

 

[edgar_raphael]

I mean the spring. Someone is selling A33 lowering spring over here, but I don't know if it will fit my A32 shocks.

 

[ongteckweng]

I mean the spring. Someone is selling A33 lowering spring over here, but I don't know if it will fit my A32 shocks.

u can check with ur local supplier like KING springs...c if the code no for a32 n a33 r the same...