tinted glass

voon

Known Member
Senior Member
Nov 28, 2003
111
0
3,016
hello all ZTH forummers,

Any good tint glass shop in penang esp seberang ?

I went to Brothers, 99 and See Lee Chan in Bm today... all of them offer the price between 350 to 400 for whole car and the brand they using are Sunguard, Suncool and others from US. Is it recommended ?

But i need some more good examples before i get me and my wife car for tint.

For those who have experience, pls share.

Our SUN is killing !! Once i get into my car......ROASTED man :lol:

thanx, have a nice day
 

km_chew

Known Member
Senior Member
Aug 10, 2004
456
26
3,028
Penang
BM got one good shop, near GP hotel only. Opposite Oncost i think. The name is SinBee. I put my tint there.
 

wildcard

Active Member
Senior Member
Nov 22, 2004
28
0
3,001
before you tint. ask the boss whether he will re-tint your glass if there are any
scratches or its not properly done. sometimes when they tint,
they might scratch the tint or damage it in someway,
better you ask him before you tint.
Last time i tinted my windows, they didn do a good job .
replaced the ones that werent nice for free. just an advise
 

cmos

Known Member
Senior Member
Oct 29, 2004
59
0
5,006
Timbuktu
Visit site
Hi Voon,

If you're in Penang, you could try UltraCool near Sungai Pinang or Neuton over at Siam Road. These are two of the best tinting specialist in Penang. Their prices are fair, but might not be the cheapest around.
 

km_chew

Known Member
Senior Member
Aug 10, 2004
456
26
3,028
Penang
Ultracool juz give me a shit work. Ask if got any replacement and the boss said "haiya, a bit only nia" and they refuse to change also. till now i am driving with that tinted/../. Sigh.... :huh:
 

voon

Known Member
Senior Member
Thread starter
Nov 28, 2003
111
0
3,016
ok, thanx for the info. Got to get my tint soon.
 

Random Post Every 5 Minutes

hello to all sifus here..

Actually,i have probs with my engine..
1st is i juz install new adj cam pulley...
then after that i install new wastegate,
donno which brand but assume as imitation
size 38mm. After tuning my car,my engine was
rev with big sound..but the boost are geting low than before..
now my boost was too low..it juz 0.6bar!!!!!

but when i tight my spring w.gate,no sound are listening even
in high boost..1.1bar..:banghead:
i dont know y..should be my wastegate...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience