sr20 workshop

[egb18c]

as i'm kind of new in this sr20 world.just got my 180sx/200sx (weheee).

need to change automatic gearbox to manual.
where can i find the place for it?
and how much does it cost?

n m looking for a 1 day workshop.looking for specialist or a workshop can do anything bout nissan cars mainly.

thks for replying.
y this silvia thread is so gloomy?hahaha

 

[CDautoparts]

When it comes to SR20... look no other than Joe Han from Drift House for Help.... check on his website in drift.com.my....

 

[egb18c]

yeah i know bout him,but he doesnt has a workshop.
i did asked him bout the matter,but he asked me to go to other workshop,but he would suply for the gearbox..

 

[bvalve]

try UMS in bandar puteri

 

[mokomoko]

You could also try monster pit on old klang road

 

[egb18c]

try UMS in bandar puteri

You could also try monster pit on old klang road

can u guys give me the actual address or some hint bout the workshops.

i cant afford to jalan2 at the area as my car drinks a lot of fuel.hehe

 

[lil_jimmy]

i would like to purpose NOT to go to OMS in Puchong.He may be a pro for SR20
but his will slit-throat you and never do it nicely.u pay profesional price but dont get the
professional service

Better try Sunway , Joehan , and the one in USJ 1

 

[egb18c]

owh,right now ive met with joehan edy,he can source good cheap part for my car.thumbs up fpr him
but still,he cant find power window motor for my 180sx.hahahaha

 

[sodeck]

Hello,

I installed an SR-20 turbo (engine and gearbox) from S14 silvia on a jeep. The car is now running fine but still in the workshop because it needs some repair/adjustment on brake system and also some wiring. However, as the mechanic is not a "kaki modified" mechanic,especially on performance engine like SR20, I think after I get the jeep out, I will need to get it to a workshop that specialize in car modifying and has a mechanic that has experience with SR20 DET. This current mechanic is excellent, he has proper workshop and a few full time mechanic helpers but he is not a turbo man. Things that I notice that need to improve are;

1) engine bay (wall) at a couple of spots were cut out to give way to the intercooler piping but the holes were cut too small (just enough for the pipe to go though). I am sure the pipe will have contact with the wall when driving and the pipe can eventually get damaged. So I need this to be improved. maybe cut the holes bigger or provide some kind of protection to the pipe or....?

2) Need experience turbo mechanic to check the overall set up of pipes, see if they are properly connected (or can be improved), check if pipes and connectors size used is ideal or can still be improved. Confirm the location and installation of BOV is suitable.

3) Need to check if fuel and air flow are sufficient. Need to measure boost-currently boost meter is not installed because the guy said he was not sure how to install the boost meter. I also gave him a turbo timer but he don't know how to install it as well.

I think you guys know what I am trying to say here and what I am looking for.

If you know anyone that does this kind of things in KL area, pls let me know. I think I can do also Pandan Indah, cheras and any place not far from KL.

Thank you.

 

[4gbanger]

i would recommend u, Ezad dazzle at puchong. u can try visit his shop first and have a chit chat before sending your car.. he is nissan expert. a31, bnr32, 33, 34, s13 to 15. he even do 350z recently..

---------- Post added at 05:11 PM ---------- 6 hour anti-bump limit - Previous post was at 05:10 PM ----------

0126107191 - ezad

 

[sodeck]

i would recommend u, Ezad dazzle at puchong. u can try visit his shop first and have a chit chat before sending your car.. he is nissan expert. a31, bnr32, 33, 34, s13 to 15. he even do 350z recently..

---------- Post added at 05:11 PM ---------- 6 hour anti-bump limit - Previous post was at 05:10 PM ----------

0126107191 - ezad

Thanks bro, I know him, he did my a31 before. But I am looking for a place near where I live ie. near KL area. I appreciate though bro...I need someone like him but in KL area, cheras, pandan indah, keramat can consider.

 

[4gbanger]

well in that case, i cant help u bro.. maybe u can try ask him instead..

 

[damnthing]

if you dont mind Puchong, then you can try Pitworks....its at Puchong Perdana....quite a number of the S15 owners i know bring their cars there, inlcuding me!

 

[sodeck]

if you dont mind Puchong, then you can try Pitworks....its at Puchong Perdana....quite a number of the S15 owners i know bring their cars there, inlcuding me!

Hi damnthing,thanks, I kind of looking for workshop in KL for now. last resort then will consider going to Puchong.
The current workshop that takes care of my jip now has completed its scope of work and I can say the jip is driveable, and running okay. I really like this SR20 (bongkok version) :) I used to run RB20 with better turbo and equipped with AFC and SITC and tuned by the person who knows what he is doing. But I can easily say that I prefer sr20 (even in original set up). The mechanic there has done a good work except that he never had experience in turbo engine before and cannot make the engine works 100% as it should be. For example, we installed the boost meter but somehow we could not connect the hose correctly and the meter don't work. Also a few things might have been missing because the engine is not from a half cut where everything is there. Oh well... :)

 

[MKMD428]

how far are you from your house to sri kembangan (serdang raya area)?
There's one: Dworks. Good in FR engines, the owner also drives 180sx for events.

 

[sodeck]

how far are you from your house to sri kembangan (serdang raya area)?
There's one: Dworks. Good in FR engines, the owner also drives 180sx for events.

Hello, I much prefer Sri Kembangan than puchong. I just already checked their facebook. I might be contacting them very soon and tell them my problem and see if they can have a look at my car.
Thanks a lot bro and do you send your machine there as well?

 

[MKMD428]

yes I do. But mine is FF SR20DET in sentra N16.
Look for Eddie. He's the one who should entertain you as he is the Boss

 

[sodeck]

Bro thanks.

 

[hopeunreal]

lil_jimmy i actually am quite happy with OMS, may i know why you say his work is cut throat and not good?
Personal experience?
Just wondering.

 

[sodeck]

BY the way, taking my jip out of the workshop today and probably just gonna park around the house until go to another workshop. Really can't wait until I can get the engine 100% done. :)