Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="InitialD" data-source="post: 330832" data-attributes="member: 4678">Guys, I found this website which is selling some sort of piggyback device for proton cars.http://m-99.co.uk/Superchips_Alternative/Proton_Mod_Chip_-_More_Power_F/proton_mod_chip_-_more_power_f.htmlBelow is what I copied from that website:This simple, yet effective unit will allow you to boost the power output of your Proton engine, without sacrificing reliability or comfort. It consists of a small electronic device that is inserted between your Protons air sensor and the ECU. This is also know as a 'piggy back' device as it is external to the main processing unit (the ECU). You will feel the gain instantly, no fooling around or expensive tuning necessary. This unit will work with all Proton vehicles equipped with electronic fuel injection. 99% of Proton cars manufactured after 1988 are equipped with electronic fuel injection.Here is how it works : You have probably heard of performance eprom chips (Superchips, BBR Starchip etc). These chips consist of a stock computer program that has been altered to inject more fuel into the engine under acceleration. Timing curves are commonly also adjusted consequently. These chips can be found to be quite effective, but are also very expensive - costing normally from £200 up to £1500 ! they also require plenty of time, specialist tools and occassionally soldering to fit. Our 'piggy back' Mod Chip on the other hand will alter the fuel and timing curves in a very similar way to the eprom chip, but without even having to open the ECU. How does it do that ? By fooling your cars computer and letting it think that your Protons engine is sucking in air at a different temperature. Your computer will respond and increase power !http://m-99.co.uk/Superchips_Alternative/mod_chip2.gif</blockquote>

Verification

The Marketplace Latest

original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body
original rare Black Racing Pro N1 16x6.5jj offset...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Suspension/coilover set up

I've finally fully set up my handling on my car.
Not track but I'll call it enough for street.

I'm driving a VW Jetta. Set up are as below:
i) Brembo 6 pots BBK
ii) 18" SSR Type F + 225/40/18
iii) H&R F22 / R26 ARB...

Looking for Evo 5 or 6 wiper water tank

deleted.........

need explanation on haltech

greetings 2 all.
i need some important details on haltech e6k n e6x.
can any1 tell me de differences btwin these 2 items?
i planned 2 buy an used e6k for my evo3 with 2.4 block,2J pistons.
can e6k support it?
my mech...