Need idea-wira install wheel 17"x9

[shafranlife]

hye guys..
yesterday i hv look some wira can install rear 17x8,back 17x9..
can i know how the install..

i want send my wira knuckle to engineering to change the PCD 4x100 to 5x114.3...
can or n't and what effect if i change?..

is there any other solution?:slug:

 

[shafranlife]

hye guys..
yesterday i hv look some wira can install rear 17x8,back 17x9..
can i know how the install..

i want send my wira knuckle to engineering to change the PCD 4x100 to 5x114.3...
can or n't and what effect if i change?..

is there any other solution?:slug:

 

[DanzEterna]

memang u can use 8 infront & 9 behind, but 1st u need adjustable suspension,
if better invest in some wide bodykit, cos if not will look funny from behind.
not much effect if u change from pcd 100 - 114.3

 

[8229]

bro,
r u using rear disk brake now? if not get FTO front & rear disk with its knuckle, its 114.3 & 5 lug, front is twin pump...

 

[ongteckweng]

just change the knuckle as suggested by 8229 but u will need widebody to fit the rims.

 

[shafranlife]

memang u can use 8 infront & 9 behind, but 1st u need adjustable suspension,
if better invest in some wide bodykit, cos if not will look funny from behind.
not much effect if u change from pcd 100 - 114.3

oo yer ker..
kalo tambah getah tak boleh ker..
selain tukar adjustable..(save kos dlu)..
hahahha

---------- Post added at 04:53 PM ---------- 6 hour anti-bump limit - Previous post was at 04:52 PM ----------

thank you h'a master danz..
org baru belajar biase la..hehehe

 

[shafranlife]

just change the knuckle as suggested by 8229 but u will need widebody to fit the rims.

thankz you master2..

 

[mysticsense]

Guys.....is it necessary to change/upgrade disc brake system if I want to change to bigger rims??

 

[ongteckweng]

depends on ur rims size n weight. if the stock rims is 15" n u upgraded to 17" lightweight rims (like TE37), then u don't have to. a bigger lightweight rims might actually weight slightly more than stock rims, so it doesn't really affect the braking.

however, if u upgraded to those bling bling rims n they weight much more than stock rims, u might wanna consider upgrading better pads + s/steel braided hose. will b good enough for stock engine