My B20B project just get started

[super fei lo]

here comes my machanic aka engineer.

doing his own calculation on the piston valve pocket. calculation or just estimation..?
haha. risk on your own dude...
here goes my 700 bucks psiton and 1000 bucks valves..

btw, lucas oil , any 1?
text me...
best oil every produce

 

[shiroitenshi]

Heh.. that one is enlarging valve pocket.. to measure valve piston clearance, is a much more elaborate procedure. Need to take out head more than once, and need to lock vtec cam lobe to measure / clay because each cam will give different clearance measurements after degree-in the cams. :P

 

[super fei lo]

yayaya..
load of thing need to be done....

install head, plasticine, lock cam lobe, TDC, open head, check plasticine for valve to piston clearnce.

repeat all of above for few times..
damd long process,

that y i bought a new cylinder head and a used cam for him to measure the clearance,
i really hope that i wont end up total lost my whole engine.

i have discuss with my mech for few weeks before this shit started.
and he agreed , but now regretted.
haha..
wish me luck guys

Bump: yayaya..
load of thing need to be done....

install head, plasticine, lock cam lobe, TDC, open head, check plasticine for valve to piston clearnce.

repeat all of above for few times..
damd long process,

that y i bought a new cylinder head and a used cam for him to measure the clearance,
i really hope that i wont end up total lost my whole engine.

i have discuss with my mech for few weeks before this shit started.
and he agreed , but now regretted.
haha..
wish me luck guys

 

[gotboost33]

sfl ballin out of control!

 

[pencalat]

hehe.. my pistons seem much dome than u.....
mmuah... Oit lsd spoon mau?? full lock.....

 

[super fei lo]

no budget...for new LSD...
my cylinder head already skim kow kow...
bahaya ni..~!
BOOM

Bump: no budget...for new LSD...
my cylinder head already skim kow kow...
bahaya ni..~!
BOOM

Bump: I JUST SEND MY HEAD TO MACHINE SHOP FOR VALVE..
HAHA..
VALVE SEATS....
HOPE IT CAN BE DONE SOON...

Bump: I JUST SEND MY HEAD TO MACHINE SHOP FOR VALVE..
HAHA..
VALVE SEATS....
HOPE IT CAN BE DONE SOON...

 

[pencalat]

Hello
Hello
Hello !!!!!!!!!!

Bro, how come?? where is my orange??
How with u 2 litre setup....
How much comp u get???

Bump: Hello
Hello
Hello !!!!!!!!!!

Bro, how come?? where is my orange??
How with u 2 litre setup....
How much comp u get???

 

[super fei lo]

salary just get cut 30% last mth...
damd...
now head and block completed...now waiting for new camshaft....
need to measure the piston to vlave clearance...
not much update mate...
hehehe.....
saku kosong....
need to save for rainy days.....


but stay tune.... :proud:

 

[jeheyr]

hi sfl...
can u list again what things have been fit into your b20 block & b16 head?
one more.. ure using mazda or tx3 piston?

 

[dc_vtec]

 

[super fei lo]

i give semu orang sebiji limau .......
but must claim kat batu caves lo...
heheheh
happy CNY....

 

[jeheyr]

oit bro..
i found your old car yesterday..
sold to kelantan Chinese guy frm Guan motorsport.....

 

[goldenegg]

Gud Luck Mr.SFL..

 

[gotboost33]

SFL...I want 2 bijik limau...Import SEREMBAN punya boleh?

 

[super fei lo]

seremban....
hmm..
siap ada susu punya kasi u...
cheerssssssssss

 

[jessie]

Where is ZTH Blog???

 

[pencalat]

hehe... happy chinese new year bro...
good luck setting ur car....

 

[super fei lo]

gong hei fatt choi...
1st day working...
felt fresh..
and lazy..
haha

Bump: gong hei fatt choi...
1st day working...
felt fresh..
and lazy..
haha

 

[same94]

absorber,
i have 2 sets but both of them stiffer then your tien.
one set is CRUX curcuit abs short stroke, and kayaba super street.
10kgm front 6 kgm rear. syok layan corner.
when comes to thick yellow line on the road...u can fell ur dashboard droppin off...

y couldnt upload any pics...
damd

Bump: hohoho.
atlast.

b20b rods + mazda piston = malaysia boleh

Bump: hohoho.
atlast.

b20b rods + mazda piston = malaysia boleh

CRUX curcuit abs short stroke?
you have 1 set?or just front or rear only??
for ef or eg?

 

[super fei lo]

crux...

1 set....
its in my car now..
damd cool....
high low....
very very very slow rebound shocks...

i just done up all my bushing for my suspension...
2k flew away...
now waitin for alighment...
hehe
goin for touge king TT really soon..
hehehe