Mr-2 Sw20

[porosaki]

Originally posted by aEROz@Mar 4 2005, 15:41
Thx for the reply prophecy316! But urm… are you giving me your bosskit?

porosaki, waaaaaaaa~ slurppppppp~... are you going to drive it to our MR2 meetings anytime soon? Hehehe. The MRS interior looks abit funny but the exterior... sexy lines. Looks nicer than what I thought an original MRS would look like hmmm. Facelift ?

will be driving to mr2 meeting if there is but not so soon maybe the week after next. still waiting for the loan and registration.
not a facelift but another body kit from the v-edition MR-S from toyota.
even the interior is another option accessories from toyota.

 

[porosaki]

Originally posted by BLaCkHoWLiNG@Mar 4 2005, 17:53
poros been naughty... guess where is dat gear knob? ;)

u and your wonderful imagination. ;)
u still haven't reply me what 4-pot caliper u using for your rav4

 

[MK84]

5-speed or 6-speed?

 

[porosaki]

Originally posted by MK84@Mar 4 2005, 19:28
5-speed or 6-speed?

5-speed sequential Manual Tranny.
gear ratio all same with the manual.
operating on electro clutch.
new MR-S is 6-speed manual and sequential.
check on the ratios, same as the 5-speed but additional 1 more gear.

final drive is 4.3

 

[porosaki]

this is the missing gear knob cost 300 bucks

BTW SM/T means sequential M/T :D

 

[midship]

Originally posted by porosaki@Mar 4 2005, 14:28
a pic of my gf car. finally it arrive from japan

ah... welcome to the club... finally a lady mr2 owner... well at least until the boyfriend slowly but surely takes over from :)

AEROZ: prophecy took the words right out from my mouth... yes, the corolla or starlet bosskit is similar to the sw20s

 

[porosaki]

this is the option body kit. cost almost 10k

next step is to install HID lamp kit. :D

so many modification to do , so little time and pocket sudah empty. :(

 

[koolspyda]

Originally posted by porosaki@Mar 4 2005, 19:50
this is the missing gear knob cost 300 bucks

BTW SM/T means sequential M/T :D

get from US/UK? hahah (pix below) the CromeDesign MR2 shifter garnish come for manual .

can use the TRD knob (RM80+?) i think. But then the SMT knob thread is smaller. I have compared the manual vs SMT.

tough luck on the 6 speed (SMT come 6 from 2002.)

sorry to dissapoint, porosaki. nobody has done a SMT 1ZZFE MRS to SMT 2ZZGE MRS in the world, (SMT MRS to 2ZZGE manual; yes, (aka forumer in UK " Jap300GT").

it's not a straight transplant, you can check "Jap300GT" nightmare in doing so. He finally spend a lot of $$$$pounds in doing so :( thrust me on this.

 

[koolspyda]

Originally posted by porosaki@Mar 4 2005, 19:56
this is the option body kit. cost almost 10k

next step is to install HID lamp kit. :D

so many modification to do , so little time and pocket sudah empty. :(

since you have the side skirts and rear kit, just change the front bumper to top secret. Only SG1,150.

The toyota stage 11 kit don't cost that much actually (under US1000 now).

 

[simonchangwaimun]

i can't help but to notice the nice HH gear panel thingy
like ferrari those thing...
can i use that in my car?

 

[koolspyda]

Originally posted by simonchangwaimun@Mar 4 2005, 20:40
i can't help but to notice the nice HH gear panel thingy
like ferrari those thing...
can i use that in my car?

thats the prototype, the final one should be by mid-year onwards. I don't think it works for MKII cause the housing is different and the shifts too.

 

[porosaki]

Originally posted by koolspyda+Mar 4 2005, 20:19 -->

QUOTE (koolspyda @ Mar 4 2005, 20:19 )

--QuoteBegin-porosaki

@Mar 4 2005, 19:50 this is the missing gear knob cost 300 bucks BTW SM/T means sequential M/T :D

get from US/UK? hahah (pix below) the CromeDesign MR2 shifter garnish come for manual . can use the TRD knob (RM80+?) i think. But then the SMT knob thread is smaller. I have compared the manual vs SMT. tough luck on the 6 speed (SMT come 6 from 2002.) sorry to dissapoint, porosaki. nobody has done a SMT 1ZZFE MRS to SMT 2ZZGE MRS in the world, (SMT MRS to 2ZZGE manual; yes, (aka forumer in UK " Jap300GT"). it's not a straight transplant, you can check "Jap300GT" nightmare in doing so. He finally spend a lot of $$$$pounds in doing so :( thrust me on this. [/b][/quote] yup already know its not a straight transplant. have to buy a manual half cut and a celica half cut before even planning to transplant it. and Trial Malaysia has the technical expertise to do it. anyway not a problem cause won't be doing transpant for 2ZZ at the mean time cause not my car yet. :lol: thanks for the advise.

 

[simonchangwaimun]

awwww damn
it looks damn cool
well anywayz
bros,and sis(if any)
any ECU that u guys have for MR2 225hp?
any ECU that can be used for the AFM?

 

[porosaki]

Originally posted by koolspyda+Mar 4 2005, 20:26 -->

QUOTE (koolspyda @ Mar 4 2005, 20:26 )

--QuoteBegin-porosaki

@Mar 4 2005, 19:56 this is the option body kit. cost almost 10k next step is to install HID lamp kit. :D so many modification to do , so little time and pocket sudah empty. :(

since you have the side skirts and rear kit, just change the front bumper to top secret. Only SG1,150. The toyota stage 11 kit don't cost that much actually (under US1000 now). [/b][/quote] is it???? anyway no need to change bodykit no doubt its nice & pretty. already happy with it and its a hassle cause already come with the fog light so a bit hard to find another bumper to fit the fog lights. must be the list price they put in the webpage :o

 

[porosaki]

2ZZ in MR-S :P

 

[BLaCkHoWLiNG]

Originally posted by porosaki+Mar 4 2005, 19:27 -->

QUOTE (porosaki @ Mar 4 2005, 19:27 )

--QuoteBegin-BLaCkHoWLiNG

@Mar 4 2005, 17:53 poros been naughty... guess where is dat gear knob? ;)

u and your wonderful imagination. ;) u still haven't reply me what 4-pot caliper u using for your rav4 [/b][/quote] it's single pot la dude.. mana ada 4 pot...

 

[koolspyda]

Originally posted by porosaki@Mar 4 2005, 22:50
already know its not a straight transplant.
have to buy a manual half cut and a celica half cut before even planning to transplant it. and Trial Malaysia has the technical expertise to do it.
anyway not a problem cause won't be doing transpant for 2ZZ at the mean time cause not my car yet. :lol:
thanks for the advise.

Enjoy the ride then.

Very soon another smirky premanent grin will be on the drivers face :D

 

[MK84]

Originally posted by simonchangwaimun@Mar 4 2005, 20:40
i can't help but to notice the nice HH gear panel thingy
like ferrari those thing...
can i use that in my car?

For SW20 you can get this.
http://www.ndh.net/home/bertakis/pics/shifter2.jpg

More info : http://www.ndh.net/home/bertakis/shifter.htm

There's also this CF shifter surround with aluminum ring from Vmax (aka Medpilot on the MR2 forums).
http://twosrus.com/new/images/Purchased_Products/VMax/VMaxshift.jpg

More info:
http://twosrus.com/new/Lower_Frames/Products/Purchased/Vmaxshift.htm

BTW I have a set of 225 ECU and AFM that I might let go. Anyone interested?

 

[simonchangwaimun]

MK,mana mau dapat itu HH thingy?
my kain start to jahanam liao
oh shit
so mahal?!
can DIY kah?

 

[aEROz]

Originally posted by MK84@Mar 5 2005, 16:34
BTW I have a set of 225 ECU and AFM that I might let go. Anyone interested?

Me me me me me!!!!!

How much?! Can test first ha? Please PM meeee :)