drive shaft

[mivec4646]

I'm driving Ford Lynx 1.8 year 95 and my drive shaft already 'kong'. I want to replace it but it so hard to find this model..if brand new the price so expensive..almost RM2K..so i wanna know whether drive shaft for B8 model can be fix to my car or not.

 

[lix]

Well, you can go to the spareparts shop buy the "head" only mah. last time i change include labour cost me 200++ only.

 

[ZENSPEED]

don,t buy recond is useless.

 

[jonhzc83]

my engine is 210 and with tx3 gearbox too... before that also kong already... but after i changed the head... everything seems okay till now.. around RM 200++ also!!

 

[gabanzgabanx]

I customize my driveshaft for 4 time at SalakSouth and SgBesi since June 2003 and the price is RM3++ (1 unit,not 1 pair).. I'm running 210 with tx3 gearbox.. please take a look at the picture..OR http://www.cardomain.com/memberpage/803785/4 OR http://i2.photobucket.com/albums/y25/gabanzgabanx/IMG_0252.jpg

 

[SPEEDSPiRiT]

Originally posted by gabanzgabanx@Apr 6 2005, 10:46
I customize my driveshaft for 4 time at SalakSouth and SgBesi since June 2003 and the price is RM3++ (1 unit,not 1 pair).. I'm running 210 with tx3 gearbox.. please take a look at the picture..OR http://www.cardomain.com/memberpage/803785/4 OR http://i2.photobucket.com/albums/y25/gabanzgabanx/IMG_0252.jpg

[snapback]873156[/snapback]​

wah! 1st time see turbo on the same model of my car!

 

[mivec4646]

Originally posted by gabanzgabanx@Apr 6 2005, 10:46
I customize my driveshaft for 4 time at SalakSouth and SgBesi since June 2003 and the price is RM3++ (1 unit,not 1 pair).. I'm running 210 with tx3 gearbox.. please take a look at the picture..OR http://www.cardomain.com/memberpage/803785/4 OR http://i2.photobucket.com/albums/y25/gabanzgabanx/IMG_0252.jpg

[snapback]873156[/snapback]​

bro...can u pls tell me the workshop name or area in salak south as u mentioned?
actually i just fixed a new drive shaft(potong) but still not good. i really got headache with this problem..u know what, i've earn almost RM1000 for this fucking stuff but still didn't solve the problem.

 

[gabanzgabanx]

The workshop address is:
EB 1 Service. No. 36 & 38,
Jln 1/108, Tmn Salak Jaya,
Salak Selatan, 56100 KL.
or you can email to [email protected]
need map?

They will take your driveshaft and send it to the engineering shop nearby.
Sometime the engineering shop will take a couple of days to cusmoize it.
(dunno why that long).
You must make sure that the custom made drive shaft is stainless steel.
If you are running B8 180/210, sometimes it also might slips or 'patah' if you push
too..too..too..too hard..like mine..hehe..

 

[mivec4646]

Originally posted by gabanzgabanx@Apr 8 2005, 04:37
The workshop address is:
EB 1 Service. No. 36 & 38,
Jln 1/108, Tmn Salak Jaya,
Salak Selatan, 56100 KL.
or you can email to [email protected]
need map?

They will take your driveshaft and send it to the engineering shop nearby.
Sometime the engineering shop will take a couple of days to cusmoize it.
(dunno why that long).
You must make sure that the custom made drive shaft is stainless steel.
If you are running B8 180/210, sometimes it also might slips or 'patah' if you push
too..too..too..too hard..like mine..hehe..

[snapback]878403[/snapback]​

thanks bro...