Fuhhh, tempting site.. like u said, the price are like continentals! But have to be prepare before the no recond parts & potong kereta policy kicks in.......
latest update for rules n regulation. this is only for AVANTECH Street Legal Machine Category.
Class F: Avantech Street Legal Machine – Vtec & Non-Vtec
1. Engines must be 2000 cc and below. The cc is referring to original block capacity.
2. Minimum weight for VTEC category as per follow;
• 1851cc - 2000cc block 950kg minimum
• 1600cc - 1850cc block 900kg minimum
3. Minimum weight for NON-VTEC category as per follow;
• Nissan SR Engine and Honda Si Engine – 900kg minimum
• Mitsubishi and Proton Engine – 800kg minimum
4. Turbocharged or supercharged engines are not allowed.
5. Rotary engines are not allowed.
6. Variable Valve engine is allowed.
7. Nitrous Oxide System (N.O.S) system is prohibited.
8. Full slick tire is not allowed.
9. Interior and exterior must be complete and present. OEM Glass cannot be replaced by any non-glass material.
10. Racing fuel tank is not allowed. .
11. Exhaust system in open.
12. Headlamp and Taillights must be in working condition.
Class G : Avantech Street Legal Machine - Turbo
1. Engines must be 2200 cc and below.
2. Minimum weight of 1000kg.
3. Turbocharged and supercharged engine are allowed.
4. Rotary engines are not allowed.
5. Variable Valve engine is allowed.
6. Nitrous Oxide System (N.O.S) system is prohibited.
7. Tires are open except for Full Slick tires.
8. Interior and exterior must be complete and present. OEM Glass cannot be replaced by any non-glass material.
9. Racing fuel tank is not allowed.
10. Exhaust system in open.
11. Headlamp and Taillights must be in working condition.
any question regarding this category can contact me. 012-2826080 (12pm-10pm). Mie.
I'm looking for a lip for my air intake system.
Pls take a look at the attached pix below & kindly advice if there's a shop that could custom make the particular parts.
gud day sifu2..im using 4g63 engine n i need ur help regarding choosing a correct brand for injector example fic, rc engineering , delphi, sard or etc...wat bout in terms of price,performance,feed rate between 800cc...