AFC Neo - Screen Change Automatically

driver_crx

Junior Member
Senior Member
Joined
Sep 23, 2008
Messages
5
Points
1,501
I'm using AFC Neo in my b16a for a few months with good response. Just recently i found the screen was change automatically and all the button was not function. Even it also not response to ECU. it look like demo set.
Send back to dealer at sunway also cannot help. Any experts here?
 
recheck your wiring... bad ground may be a possible cause. if all wiring is confirmed ok.. your safc neo is possibly fried, although is rare...
 
i do think so... i've used neo b4... but it doesn't happen..
 
Hi all,

Just share the info... found it in internet also.
source http://www.srtforums.com/forums/f87/afc-neo-key-operation-disabled-551647/

i face same problem with my safc neo. now it solve.

Solution:
1. Turn off the power to your NEO.(turn off your car)
2. Hold the left, bottom, and right button (known as the U) and power your car on
3. It should go back to the menu of demo, self test, and clear eeprom.
4. Toggle to clear eeprom and turn your car off.
5. Turn you car back on and you should be back to the main menu.
 

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience