- Joined
- Apr 28, 2005
- Messages
- 223
- Points
- 3,016
hello everybody,
wanna ask something bout adjustment on my 3-way-Elec. XO. i have one 4" COAXIALS speakers and another 6.5". i would like to know the adjustment on my electronic XO. so,
front high pass: the high pass freq control range is from 35Hz to 400Hz. i already switch on my 4 channel amp XO to high pass. so for this 3-way-Elec XO, what freq. should i switch to? the front output level allow from 0 to 10dB. so, which dB should i switch it to? based on the feeling? wat bout the multiplier? x1 or x20?
rear high pass: same as above. which freq range should i tune to and the dB level? and not to forget the multiplier?
sub low pass: the freq range is from 25 to 400Hz. which one to tune to? Boost level? range is from 0dB to 18dB. then got this sub output level? from 0 to 10dB.
the amp for this sub must switch to low pass rite for the xo?
anyone?Zenn?kyheng?oldskolboyz?........pls?
desmond.
wanna ask something bout adjustment on my 3-way-Elec. XO. i have one 4" COAXIALS speakers and another 6.5". i would like to know the adjustment on my electronic XO. so,
front high pass: the high pass freq control range is from 35Hz to 400Hz. i already switch on my 4 channel amp XO to high pass. so for this 3-way-Elec XO, what freq. should i switch to? the front output level allow from 0 to 10dB. so, which dB should i switch it to? based on the feeling? wat bout the multiplier? x1 or x20?
rear high pass: same as above. which freq range should i tune to and the dB level? and not to forget the multiplier?
sub low pass: the freq range is from 25 to 400Hz. which one to tune to? Boost level? range is from 0dB to 18dB. then got this sub output level? from 0 to 10dB.
the amp for this sub must switch to low pass rite for the xo?
anyone?Zenn?kyheng?oldskolboyz?........pls?
desmond.