From kitchen to turbo...

chinozie

Very Young Member... :D
Senior Member
Joined
Jul 5, 2004
Messages
3,429
Points
5,163
Location
Damansara
Do you think bling bling pot can only boils and cooks...!!!

you are wrong...!

take a look into this...


Very bling2 n expensive pot...stainless steel some more...

Pan2.jpg

Pan1.jpg



cut in half...

Cutpan.jpg



cut again...

Template.jpg







wallaaaa...
Heat shield for turbo

Panonturbo4.jpg




engine bay...BlackHowling do try this at home :driver:

DannyEngine.jpg



WARNING : Please don't try this at home unless you got permission from your mum or wife... :burnout:
 
okie okie...i'll buy a new one for mom
 
i tot all these stainless steel are made for trasnfer heat.... can block heat also ga?
 
whoa........... cool!!!
can tambah heat wrap to wrap around the shield too.
 
hopes mom really dont read this...if not....aiyaaa danger...she will lock all her pots from being stollen....ekekekek
Anyway..very nice idea....kitchen to turbo.....:adore::adore:
 
nice mod.... but technically... SUS is not really a good choice as heat shields.. but one thing though... they look nice... :p BA polish......
 
seriously folks... if its only for decorative purposes... then its ok... but i would not recommend SUS to be used as heat shields.... this is because SUS is not heat resistant... cooking wares uses SUS 316 which is not heat resistant.... the only heat resistant SUS is 316Ti.... which has titanium...

Aluminium would be a better choice.. although it is also quite a good heat conductor... but it disperse heat faster then most metals.. therefore.. if it is used as heat shields.... and there is cold air passing through it.... it will cool down faster....

However, some materials suck as MC Nylon or Teflon would be the best choice for heat shields... these 2 materials are quite common nowadays.... just my 5cents worth of thought... :burnout:
 

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience