As a car guy, do you people have this kind of experience?

[ken yeang]

RM9k is relative.

Last month, my ex-boss blew RM24k on a set of special tailormade offset 20" AMG rims for his Merc. You wont believe how much he paid the custom for the set of rims......

shhhhhhh..............

 

[6UE5t]

I think any car guy would have experienced this before. One thing lead to another kind of thing. I've never met a car guy who got everything he wanted 1st time.

My case was the old wira. Engine overhauled with 2 friends took 6 months partially because spent most of the weekends working on it. As we started rebuilding the engine after cleaning everything out :

"Eh.. why not change to forged? And oversize? While you're at it reline the cylinder walls too".
"Eh.. lighten la. Engine more power"
"Eh.. Balance also la since you've already done so much"
"Eh.. replace with titanium fasteners la. Stronger better lighter."

etc

Damn thing was supposed to be 4k+ end up almost 9k. But end result was a 3-speed auto that could do just above 100whp.

Ok next story : Auto changed to manual. Car felt slower with the manual. And true enough, it dropped to 89whp. Spent money finding out why and realised it was AFR so spent money on a piggyback which made it go back up 113whp.

Then overheated. Skimmed max head couldn't be reused. Sent engine for rebuilding again (too lazy to rebuild myself) and the car came back even more underpowered due to a few possible reasons. Back to the 80whp+ range in fact.

After that car sold. All that money burnt for nothing.

Fuh! RM9k, that is what I spend on my transplant, means engine, workmanship, suspension and exhaust all in.....200 horses woh!.....

Should've just buy a new Mark X engine, only 6k brand spanking new with papers some more! :D

 

[ken yeang]

mark X engine cannot masuk mitsubishi engine bay wor......

 

[^pomen_GTR^]

I think any car guy would have experienced this before. One thing lead to another kind of thing. I've never met a car guy who got everything he wanted 1st time.

My case was the old wira. Engine overhauled with 2 friends took 6 months partially because spent most of the weekends working on it. As we started rebuilding the engine after cleaning everything out :

"Eh.. why not change to forged? And oversize? While you're at it reline the cylinder walls too".
"Eh.. lighten la. Engine more power"
"Eh.. Balance also la since you've already done so much"
"Eh.. replace with titanium fasteners la. Stronger better lighter."

etc

Damn thing was supposed to be 4k+ end up almost 9k. But end result was a 3-speed auto that could do just above 100whp.

Ok next story : Auto changed to manual. Car felt slower with the manual. And true enough, it dropped to 89whp. Spent money finding out why and realised it was AFR so spent money on a piggyback which made it go back up 113whp.

Then overheated. Skimmed max head couldn't be reused. Sent engine for rebuilding again (too lazy to rebuild myself) and the car came back even more underpowered due to a few possible reasons. Back to the 80whp+ range in fact.

After that car sold. All that money burnt for nothing.

as for n.a car, forged item not always neccessary....

if myself rebuild fast street spec car using 4g1x....i would do camshaft, engine balancing and lightening only...plus mild porting job...and the rest of budget would go for exhaust setup,tuning and perhaps those bigger intake manifold with bigger tb.... and stay away from performance clutch...if die die want better clutch just get heavy duty clutch cover...more than enough for sub 200whp especially a daily car..... i dont want a jumpy street car especially during traffic jam....

 

[ken yeang]

some ppl mod their car becoz they want create a loooooong list of performance goodies.....and to impress others.....:hmmmm:

 

[stupidcar]

Life of tuners in a nut shell lol

 

[^pomen_GTR^]

some ppl mod their car becoz they want create a loooooong list of performance goodies.....and to impress others.....:hmmmm:

want to see my goodies list?

too many to list...


but i write one:

100+ oil catch can... :proud::proud::proud:

 

[ken yeang]

100% fullmark for the 100Plus bottle usage

 

[vr2turbo]

Should've just buy a new Mark X engine, only 6k brand spanking new with papers some more! :D

My engine only RM3.5k that time. Close to RM9k is for transplant cost, suspension and exhaust all in....

---------- Post added at 02:54 PM ---------- 6 hour anti-bump limit - Previous post was at 02:53 PM ----------

100% fullmark for the 100Plus bottle usage

Eco friendly too.....recycle.......

 

[Izso]

Fuh! RM9k, that is what I spend on my transplant, means engine, workmanship, suspension and exhaust all in.....200 horses woh!.....

Should've just buy a new Mark X engine, only 6k brand spanking new with papers some more! :D

as for n.a car, forged item not always neccessary....

if myself rebuild fast street spec car using 4g1x....i would do camshaft, engine balancing and lightening only...plus mild porting job...and the rest of budget would go for exhaust setup,tuning and perhaps those bigger intake manifold with bigger tb.... and stay away from performance clutch...if die die want better clutch just get heavy duty clutch cover...more than enough for sub 200whp especially a daily car..... i dont want a jumpy street car especially during traffic jam....

You guys really wanna rub salt to the wound hor?

But I did it because I wanted the experience and wanted to push the engine to see what I could do with it. Not because I wanted power or wanted this or that. If I wanted power, 9k can do a lot already lor.

Besides, I've never said my car was fast. Max dyno 114whp only mah. That's not a lot. Then final dyno figure after manual swap and after head change.. 89whp.



Anyway, the topic is "car guy", and I'm a car guy. Not a "race guy" or "gila power guy". Ok I'd be lying if I said I not gila power. But during that time the rebuild was very interesting. Mod for efficiency not really power. 15km/L bitchesssssssssssssss on a 3 speed auto

 

[leinnz]

Cool down bro Izso... yeap talking on as a car guy, it is just not only the heart of the car, i hink the appearance too is important. outlook paintjob is good, but when going for a new paint, all rust and issues come out.

 

[vr2turbo]

Anyway, the topic is "car guy", and I'm a car guy. Not a "race guy" or "gila power guy". Ok I'd be lying if I said I not gila power. But during that time the rebuild was very interesting. Mod for efficiency not really power. 15km/L bitchesssssssssssssss on a 3 speed auto

Gila power mod for efficiency? 15 still far from cvkit 18km/l woh!....hhahhahahahhaha

 

[Izso]

Gila power mod for efficiency? 15 still far from cvkit 18km/l woh!....hhahhahahahhaha

3 speed 1.5L auto full sized aeroback vs 5-speed manual lightweight 1.5L Myvi.

Not exactly a level comparison

 

[vr2turbo]

3 speed 1.5L auto full sized aeroback vs 5-speed manual lightweight 1.5L Myvi.

Not exactly a level comparison

Yalah, pulling your leg. Yours modded, his standard also....

 

[^pomen_GTR^]

damm..mine with grandma driving style also just 10.5-13km/l only worrr...that was best effort summore...

the turbo awd even worse.... 8km/l average...best 9km/l...usually around 7km/l

 

[esthapo]

Ouch...mine no turbo also running on 8km/l average...better buy turbo lah like this

 

[Izso]

Hmm.. my stock car now best is 10km/L to 11km/L. With highway best is 13km/L.

But at the moment I don't really care. POWERRRRRRRRRRRRRRRRRRRR

 

[vr2turbo]

damm..mine with grandma driving style also just 10.5-13km/l only worrr...that was best effort summore...

the turbo awd even worse.... 8km/l average...best 9km/l...usually around 7km/l

Turbo like that loh. I am getting 7km/l also....

 

[^pomen_GTR^]

Turbo like that loh. I am getting 7km/l also....

we use old engine mah...

those alza/myvi bolt on snail also very fast but FC quite save a lot too compared with us old engine

 

[vr2turbo]

we use old engine mah...

those alza/myvi bolt on snail also very fast but FC quite save a lot too compared with us old engine

Engine displacement smaller and power to weight ratio loh......