what daihatsu engine suitable for race/time attack??

  • See what others are reading now! Try Forums > Current Activity
  • Search function more powerful with google results! Try Search

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,002
8,385
1,713
Petaling Jaya
I did once suggested to get Kancil Turbo before I got back Wira. The first thing my mother said is, "You want get a car with swapped engine? Later inside there got wiring short circuit and burn your car then you know". Because there is once she saw a Kancil turbo caught fire by the road side. Plus if they know that car has a turbo, that's enough to go against me already. They'll think I'll go racing with that car or perhaps revving around the streets to demo the BOV sound. :rofl:
Your mom knowledge on cars no joke woh!....:adore:

---------- Post added at 04:46 PM ---------- 6 hour anti-bump limit - Previous post was at 04:46 PM ----------

No la, get a normal one 1st since you also don't speed one. Kancil can definitely make you drive at 60-80km/h :rofl:

Later after school and finish studies only mod also can. Car burnt, can be many reasons la.
Is like one plane went missing then in future doesn't mean everyone will still be afraid to get on the plane ma :rofl:
Get normal kancil? I will drive the Wira anytime.....:driver:
 

Supra_Fanatics

Beyond 20,000 RPM!
Senior Member
Sep 17, 2008
20,685
3,998
1,713
Your mom knowledge on cars no joke woh!....:adore:

---------- Post added at 04:46 PM ---------- 6 hour anti-bump limit - Previous post was at 04:46 PM ----------



Get normal kancil? I will drive the Wira anytime.....:driver:
For you sure la, u will be too big for the car :rofl:

Also I will choose wira over kancil if stock vs stock.
Cuz I don't plan to keep it stock :rofl:
Beh tahan the power.
 

Wilson13B

Known Member
Senior Member
Dec 15, 2010
296
30
528
Kuala Lumpur
but L2 have these problems

1. temperature rising when drive hard. but this is refering to stock radiator. some say need to mate with 1000cc block to make it more durable to heat.

2. boost cut is at 0.9 bar. need stand alone to remove. but some say it can be hacked by doing some re-wiring or cheat the map sensor.

L5/L7 (EF-DET)have this advantage

1. more torque even in stock form than L2

2. pnp with 1000cc block.

3. no temperature problem like L2

4. boost cut at 1.3 bar if i'm not mistaken..

correct me if im wrong..

---------- Post added at 05:29 PM ---------- 6 hour anti-bump limit - Previous post was at 05:26 PM ----------

if u say L5, L5 have few model of engines such as EF-JL (3 cylinder SOHC with more electronics than L2), EF-RL (3 cylinder DOHC) and JB-JL (4 cylinder DOHC)
The 0.9 bar boost limit on EF-DET can be eliminated by adding a resistor between the MAP sensor wiring & ecu , but of course u ill need at least a piggyback like Emanage Blue to keep the AFR spot on as the stock ECU only saw 0.9 bar of boost but the reality is it already running at over 0.9 .

I been played with a EF-DET with 1.0 block & stroke to give it a 1L capacity ,ori is just 660 so after installing a TD05 it is laggy so it crying for a increase in displacement ... but in the end i switched to YRV as EF-DET have limitation as its only a 3-cylinder , running at 1.5 bar of boost only get me around 160whp @20Kgm of torque before the gearbox gave up ...
 

4gbanger

1,500 RPM
Senior Member
Thread starter
Jun 26, 2013
1,958
386
1,683
Johor/ShahAlam
id get dat k3ve
if talking about K3 series, K3ve2 is faster than K3ve..

---------- Post added at 06:00 PM ---------- 6 hour anti-bump limit - Previous post was at 05:55 PM ----------

thanks bro wilson13b. i'm sure i make ur statement here as my guidance.. 150whp for a kancil is already fast but since its a car for time attack, once i upgrade to 1L engine i have to race with K3vet. and keicar scene at selangor recently, few kelisa here with K3vet using sequential dog box.. and they are shit fast..
 

Wilson13B

Known Member
Senior Member
Dec 15, 2010
296
30
528
Kuala Lumpur
if talking about K3 series, K3ve2 is faster than K3ve..

---------- Post added at 06:00 PM ---------- 6 hour anti-bump limit - Previous post was at 05:55 PM ----------

thanks bro wilson13b. i'm sure i make ur statement here as my guidance.. 150whp for a kancil is already fast but since its a car for time attack, once i upgrade to 1L engine i have to race with K3vet. and keicar scene at selangor recently, few kelisa here with K3vet using sequential dog box.. and they are shit fast..
in my opinion ,the K3VET is more durable , it can be tuned to produce 200-300whp range easily as it is a 1.3L .

Just my 2 cents .
 

RENESIS VIII

7,000 RPM
Senior Member
Jun 13, 2012
7,063
950
1,713
Ipoh
Get the AE101 Coupe. Nicer :smile:
AE101 coupe is nice but too rare to find one. But if I have the normal Corolla SEG AE101, maybe I'll attempt something crazy like trying to convert the front into AE101 Levin/Sprinter Trueno head. But JPJ might hunt me down for that. :biggrin:

Your mom knowledge on cars no joke woh!....:adore:

---------- Post added at 04:46 PM ---------- 6 hour anti-bump limit - Previous post was at 04:46 PM ----------



Get normal kancil? I will drive the Wira anytime.....:driver:
She does seemed to know a few things about cars which surprised me when I discovered it. Example would be, she know about turbo cars having that BOV sound and also turbo timer is needed in turbo cars. She even knew that my Wira 4G15 is using Mitsubishi ECU.

For you sure la, u will be too big for the car :rofl:

Also I will choose wira over kancil if stock vs stock.
Cuz I don't plan to keep it stock :rofl:
Beh tahan the power.
Kancil stock is like same with those on learning center. Those L licence training car. :biggrin:

BTW, remember that flamethrower Kancil pic I posted and that 8000 rpm Kancil? :biggrin:

in my opinion ,the K3VET is more durable , it can be tuned to produce 200-300whp range easily as it is a 1.3L .

Just my 2 cents .
But K3-VET suffers from it's 4 speed auto... Unable to fully put all the power into good use unlike how a manual do.
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,002
8,385
1,713
Petaling Jaya
For you sure la, u will be too big for the car :rofl:

Also I will choose wira over kancil if stock vs stock.
Cuz I don't plan to keep it stock :rofl:
Beh tahan the power.
I only know if my son drive I don't think I can go in also....hahahahhaha:biggrin:

---------- Post added at 11:08 PM ---------- 6 hour anti-bump limit - Previous post was at 11:07 PM ----------

She does seemed to know a few things about cars which surprised me when I discovered it. Example would be, she know about turbo cars having that BOV sound and also turbo timer is needed in turbo cars. She even knew that my Wira 4G15 is using Mitsubishi ECU.
That is very good already....
 

RENESIS VIII

7,000 RPM
Senior Member
Jun 13, 2012
7,063
950
1,713
Ipoh
I only know if my son drive I don't think I can go in also....hahahahhaha:biggrin:

---------- Post added at 11:08 PM ---------- 6 hour anti-bump limit - Previous post was at 11:07 PM ----------



That is very good already....
Your son too big sized? Hope you don't mind me asking.

My mother said she heard those from friends and some from my father.
 

Izso

NA NA NA NA NA
Helmet Clan
Moderator
Mar 28, 2004
15,390
6,411
5,213
KL
Vr2turbo's family are all giants. Except the wife. She's my height (172cm). The rest are all taller than me with the son being at least 2-3 heads taller than me.

Fuh.. mom knows Mitsubishi ECU. Next thing you know she'll suddenly let slip "In my day, everyone tuned carbs...." :biggrin:
 

Supra_Fanatics

Beyond 20,000 RPM!
Senior Member
Sep 17, 2008
20,685
3,998
1,713
in my opinion ,the K3VET is more durable , it can be tuned to produce 200-300whp range easily as it is a 1.3L .

Just my 2 cents .
So it means YRV Turbo is also PnP in Kancil? Engine Mounting no need to mod?
Yours is just a track car or legal for street use as well bro?

Below 200hp for a kancil is actually very fast already. More than that has to be only suitable for drag races on track.

AE101 coupe is nice but too rare to find one. But if I have the normal Corolla SEG AE101, maybe I'll attempt something crazy like trying to convert the front into AE101 Levin/Sprinter Trueno head. But JPJ might hunt me down for that. :biggrin:

She does seemed to know a few things about cars which surprised me when I discovered it. Example would be, she know about turbo cars having that BOV sound and also turbo timer is needed in turbo cars. She even knew that my Wira 4G15 is using Mitsubishi ECU.

Kancil stock is like same with those on learning center. Those L licence training car. :biggrin:

BTW, remember that flamethrower Kancil pic I posted and that 8000 rpm Kancil? :biggrin:

Your son too big sized? Hope you don't mind me asking.

My mother said she heard those from friends and some from my father.
SEGs I think so far I never heard problems with them converting to levin bumper or so. Had a friend who did that conversion for the front only. That day at car mart, we saw one very well maintained with new paint SEG at Car Mart. Selling at only RM14K but AT. Inside not sure is stock or blacktop but the car is super clean and good condition. Very tempting to get it. Black Gray Metallic.

Your mum might tell you 1 day that she was actually crowned as champion few times on track day races like Leona Chin back in those days :rofl:

Ya learning school type of kancil. But now lots also using Viva.

Vr2turbo's son very big size. His shoe alone can cover more than your face :rofl:
 

Izso

NA NA NA NA NA
Helmet Clan
Moderator
Mar 28, 2004
15,390
6,411
5,213
KL
On a side tangent, it's not the car that decides the time for TTA, it's the driver! I mean, look at sifu fstrader @ fstr @ fred. The fella 3-speed manual wira and completely terrorized the GRA scene with it
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,002
8,385
1,713
Petaling Jaya
Your son too big sized? Hope you don't mind me asking.

My mother said she heard those from friends and some from my father.
Yup, Big and tall too.

At least she understand and remembers....:driver:

---------- Post added at 09:26 AM ---------- 6 hour anti-bump limit - Previous post was at 09:23 AM ----------

Vr2turbo's family are all giants. Except the wife. She's my height (172cm). The rest are all taller than me with the son being at least 2-3 heads taller than me.

Fuh.. mom knows Mitsubishi ECU. Next thing you know she'll suddenly let slip "In my day, everyone tuned carbs...." :biggrin:
My wife at your height actually considered tall for a lady....hahaha:biggrin:

hmmm... so in future my wife can tell my kids, she grind valves before (help dad in law who was a mechanic)....:biggrin::biggrin:
 

RENESIS VIII

7,000 RPM
Senior Member
Jun 13, 2012
7,063
950
1,713
Ipoh
Vr2turbo's family are all giants. Except the wife. She's my height (172cm). The rest are all taller than me with the son being at least 2-3 heads taller than me.

Fuh.. mom knows Mitsubishi ECU. Next thing you know she'll suddenly let slip "In my day, everyone tuned carbs...." :biggrin:
That's why he needs the powerful engine in the VR to fetch all of them. :biggrin:

It surprised me when I told her about the MMC ECU and she said she knew about it. She even said newer ECU have power loss compared to MMC.

So it means YRV Turbo is also PnP in Kancil? Engine Mounting no need to mod?
Yours is just a track car or legal for street use as well bro?

Below 200hp for a kancil is actually very fast already. More than that has to be only suitable for drag races on track.



SEGs I think so far I never heard problems with them converting to levin bumper or so. Had a friend who did that conversion for the front only. That day at car mart, we saw one very well maintained with new paint SEG at Car Mart. Selling at only RM14K but AT. Inside not sure is stock or blacktop but the car is super clean and good condition. Very tempting to get it. Black Gray Metallic.

Your mum might tell you 1 day that she was actually crowned as champion few times on track day races like Leona Chin back in those days :rofl:

Ya learning school type of kancil. But now lots also using Viva.

Vr2turbo's son very big size. His shoe alone can cover more than your face :rofl:
I mean more than converting bumpers. Convert the front grill and lights as well. Don't know whether is that okay or not. Like the case of Wira convert Evo 1,2,3 front.

I'd be very much surprised if my mum said something like that. My Wira was used to be driven by her when the car was just bought. Yeah, manual and she drove it for many years. Another thing is, my mum's sister (my aunt) who lives with me also drives a manual Myvi. She tell me manual got more power and easier to overtake cars. :adore: What I can say is, my aunt who is not young anymore still drives a manual Myvi but majority of the students around my uni drives auto Myvi. :banghead:

On a side tangent, it's not the car that decides the time for TTA, it's the driver! I mean, look at sifu fstrader @ fstr @ fred. The fella 3-speed manual wira and completely terrorized the GRA scene with it
3 Speed auto but use it like 3 speed manual. Lately still using 4 speed Alza for drag race. :adore:

Yup, Big and tall too.

At least she understand and remembers....:driver:

---------- Post added at 09:26 AM ---------- 6 hour anti-bump limit - Previous post was at 09:23 AM ----------



My wife at your height actually considered tall for a lady....hahaha:biggrin:

hmmm... so in future my wife can tell my kids, she grind valves before (help dad in law who was a mechanic)....:biggrin::biggrin:

Maybe older generations people knows more about cars compared to those younger generations now.
 

Supra_Fanatics

Beyond 20,000 RPM!
Senior Member
Sep 17, 2008
20,685
3,998
1,713
That's why he needs the powerful engine in the VR to fetch all of them. :biggrin:

It surprised me when I told her about the MMC ECU and she said she knew about it. She even said newer ECU have power loss compared to MMC.

I mean more than converting bumpers. Convert the front grill and lights as well. Don't know whether is that okay or not. Like the case of Wira convert Evo 1,2,3 front.

I'd be very much surprised if my mum said something like that. My Wira was used to be driven by her when the car was just bought. Yeah, manual and she drove it for many years. Another thing is, my mum's sister (my aunt) who lives with me also drives a manual Myvi. She tell me manual got more power and easier to overtake cars. :adore: What I can say is, my aunt who is not young anymore still drives a manual Myvi but majority of the students around my uni drives auto Myvi. :banghead:

3 Speed auto but use it like 3 speed manual. Lately still using 4 speed Alza for drag race. :adore:

Maybe older generations people knows more about cars compared to those younger generations now.
Ya i know what u mean, smoke headlights and etcs. I think seen before. It doesn't differ too much from the ori SEG looks. To me looks better. Rear normally untouched. They usually only mod the front for facelift.

I think either your mum or your dad use to play cars during their younger days. Maybe they just don't want u to know. Come to think of them afraid that you will race, kinda make me feel suspicious :rofl:
 
Last edited:

Izso

NA NA NA NA NA
Helmet Clan
Moderator
Mar 28, 2004
15,390
6,411
5,213
KL
It surprised me when I told her about the MMC ECU and she said she knew about it. She even said newer ECU have power loss compared to MMC.
Ok after that statement I know she just listening to what people say and repeating it to you. Power loss compared to MMC? Says who la?
 

DanzEterna

Moderator
Moderator
Senior Member
Nov 1, 2007
15,910
3,371
3,213
PJ
www.primeperdanaclub.com
for example the sgti 1999-early 2001 model was using MMC ecu, no speed/rev cut, can add on emanage, batch after late 2001-2003 comes with siemens ecu with speed/rev cut & cannot use emanage.
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,002
8,385
1,713
Petaling Jaya
I'd be very much surprised if my mum said something like that. My Wira was used to be driven by her when the car was just bought. Yeah, manual and she drove it for many years. Another thing is, my mum's sister (my aunt) who lives with me also drives a manual Myvi. She tell me manual got more power and easier to overtake cars. :adore: What I can say is, my aunt who is not young anymore still drives a manual Myvi but majority of the students around my uni drives auto Myvi. :banghead:
Like many if they were to be asked to re park a manual car they will refuse, because forgot how to drive them....:biggrin:
 

Supra_Fanatics

Beyond 20,000 RPM!
Senior Member
Sep 17, 2008
20,685
3,998
1,713
Like many if they were to be asked to re park a manual car they will refuse, because forgot how to drive them....:biggrin:
Seems like referring to someone familiar :hmmmm2:
 

Random Post Every 5 Minutes

Hi Guys,
Just wanna share my experience with my mech/workshop with u guys.

on the 06.02.10, i send my car to my workshop to rebuild my engine nearby my apartment,
supposedly yesterday 16.03.10, after 6 bloody weeks i was so happy that i will collect my car,
but at 2 pm, my foreman called me told me to immediately come to the workshop, so i did lor...
guess wat, when i reached there, my left door was like a 'V' shaped.....the stupid foreman can langgar the tiang roadsign......the...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience