Transplanting M50b25 into my E36

[chinwen09]

Lol 4 door only practical if I buy a 2 door ma. Haha I use it as a daily car so can't too high torque. Later u drop longkang again....at least this is a self finance project maa no donation XD



i dun understand why high torque will masuk longkang...

 

[s1tl]

high torque means more fun, more fun means heavier foot, heavier foot means more tail sliding, get it?

---------- Post added at 02:08 PM ---------- 6 hour anti-bump limit - Previous post was at 08:48 AM ----------

Updates for this week : 17 Nov 2011
The Car is on the hydraulic lift already!

and...The Engine is IN! Excited feeling =D

The front 5 speed auto gear box also masuk edi

Here is the old 4 speed auto

Finally the ventilated disc brakes is in

The workshop says the next step is to complete the wiring as the ABS wiring needs to go behind before the rear gearbox and exhaust can be installed. Approximate Mid December i can enjoy the car. woot Finally...

 

[Izso]

Ha? The old GB was 4-speed? I thought Beemers had minimum 5 speed. That's just erm.. humbling considering my pathetic car is 3-speed!

 

[s1tl]

Ha? The old GB was 4-speed? I thought Beemers had minimum 5 speed. That's just erm.. humbling considering my pathetic car is 3-speed!

What car has 3 speed!? Yes the old car is a 4 cylinder that's y the 4 speed

 

[Mr.JY]

18" BBS LM-R or 18" RS-GT with some 9.5jj deep dish and abit negative camber for stability and looks

not going for M3 parts as their high theft i prefer a low profile sleeper with 318 parts but a 325 engine..most probably i will throw in a exhaust system, preferably supersprint twin exit

Good choice with the rims. The E36 would look good sitting on black/powder coated matte BBS rims. Pricey though. Have you found out where you'll be getting those rims?

 

[s1tl]

Good choice with the rims. The E36 would look good sitting on black/powder coated matte BBS rims. Pricey though. Have you found out where you'll be getting those rims?

Still looking tho. I'm waiting for the car to be ready first

 

[g4i8y0t]

Very very nice 2.5 inline-6 you got there.. I've always dreamed about getting an E36, but what to do, still driving an old Honda :help:

 

[s1tl]

Wanna swap? I love ur metallic gold ek hahaha

 

[eujin]

yes ultimate auto. haha maybe we can have TT, i love the e34 with m3 bodykit, u got the side fender too?

yah...sure no problem....wait till ur car is ready thn i can test drive abit...hehhe.....

---------- Post added at 06:46 AM ---------- 6 hour anti-bump limit - Previous post was at 06:38 AM ----------

Still looking tho. I'm waiting for the car to be ready first

if u searching for rims...i got a tyre shop which can find for u in ipoh...

 

[s1tl]

yah...sure no problem....wait till ur car is ready thn i can test drive abit...hehhe.....

---------- Post added at 06:46 AM ---------- 6 hour anti-bump limit - Previous post was at 06:38 AM ----------



if u searching for rims...i got a tyre shop which can find for u in ipoh...

which shop???

 

[eujin]

which shop???

ipoh tyre at jalan kampar...shop board with yokohama...

 

[s1tl]

got nice rims there? =D im waiting for the car to come out first then search for rims. normally tyre shops ask me to bring the car so that can put side by side to view

 

[VIPaltis]

Bro, why did u decide on 325 engine and not 328 ??? If u wanted power, then 328 should be better, correct me if im wrong ???

 

[BLaCkHoWLiNG]

u can stroke it to 3.0 and supercharge it..

pm ramsing







http://image.eurotuner.com/f/9994773+w750+st0/eurp_0705_10_z+325i_328i_tuning_guide+vf_engineering_supercharger.jpg

 

[s1tl]

Bro, why did u decide on 325 engine and not 328 ??? If u wanted power, then 328 should be better, correct me if im wrong ???

you are right on the 328 but the maintenance cost will increase as ive done research on the 328 and found that alot of 328 owner struggle on lots of maintenance problems. 325 is just ngam ngam well balanced. im not power hungry yet, so i prefer a well balanced ride so i can drive it smoothly up genting or any mountain pass. Touge Enthusiast!

u can stroke it to 3.0 and supercharge it..

pm ramsing







http://image.eurotuner.com/f/9994773+w750+st0/eurp_0705_10_z+325i_328i_tuning_guide+vf_engineering_supercharger.jpg

haha funny fella la you. supercharged in one of my future projects la. i choose Raptor supercharger woot boosting like a boss

 

[eujin]

u can stroke it to 3.0 and supercharge it..

pm ramsing







http://image.eurotuner.com/f/9994773+w750+st0/eurp_0705_10_z+325i_328i_tuning_guide+vf_engineering_supercharger.jpg

orgasmatic......but still prefer 1jz....

 

[s1tl]

i too prefer 1jz but its alot trouble to do it in Ipoh as there is no mechanic professional enought to do it. i worry if i do it i might have more problem than before. so better be safe than sorry go original lo

 

[tetz6909]

nice subaru blue you've done there. mind sharing the paint shop? been searching for a good trustworthy paint shop in ipoh for quite a while here thanks.

 

[eujin]

i too prefer 1jz but its alot trouble to do it in Ipoh as there is no mechanic professional enought to do it. i worry if i do it i might have more problem than before. so better be safe than sorry go original lo

yah...ipoh there is no pro ppl enuf to convert 1jz into bmw....so far i found there is a shop in senawang tht transplant 1jz o 2jz for bmw..

 

[s1tl]

nice subaru blue you've done there. mind sharing the paint shop? been searching for a good trustworthy paint shop in ipoh for quite a while here thanks.

Do u know menglembu Lau Motor Sdn. Bhd.? They did the job for me. If u go there just mention mr Lai's introduced they will give u good price. If they ask which mr Lai just say Subaru blue e36

yah...ipoh there is no pro ppl enuf to convert 1jz into bmw....so far i found there is a shop in senawang tht transplant 1jz o 2jz for bmw..

That's y I didn't want to risk it...