Wira modification

Leongyew

Known Member
Senior Member

Leongyew

Known Member
Senior Member
May 9, 2005
122
0
3,016
Malaysia
i driving a wira now and i have finally save enuff money to do some mod all the sifu out there please give me some advise and help....thank q guy
 

gsrTurbo9166

500 RPM
Senior Member

gsrTurbo9166

500 RPM
Senior Member
Apr 23, 2005
958
0
3,016
Leongyew said:
i driving a wira now and i have finally save enuff money to do some mod all the sifu out there please give me some advise and help....thank q guy
hi bro,u use back ur stock engine or wan to convert another engine
 

badbadguy

Active Member
Senior Member

badbadguy

Active Member
Senior Member
Apr 28, 2005
48
0
3,006
just throw away ur proton engine (unless urs is putra or GTI) and put in mitsubishi engine like MIVEC or GSR
and u no need to mod and can win alot moded kau kau proton engine

just my 2 cents
 

Leongyew

Known Member
Senior Member

Leongyew

Known Member
Senior Member
Thread starter
May 9, 2005
122
0
3,016
Malaysia
hi

i wan to convert another engine

but i donno wat engine to convert and i dunno how much it is....1 more thing i dunno how to drive manual wan kekke...only auto....so wat engine should i convert to? :) :)
 

badbadguy

Active Member
Senior Member

badbadguy

Active Member
Senior Member
Apr 28, 2005
48
0
3,006
wira actualy got few engine to convert
from the bottom to upper (all auto engine will be cheaper)
1. 4G91 about RM 4000 for every thing manual
2. 4G92 Dohc- non mivec RM 6000
3. 4G92 Mivec RM 7000++
4. 4G93 (GTI or Putra or mitsubishi also have) RM 6000 (if original below 1.5 CC then u can forget about it)
5. 4G93T GSR RM 7000++ (if original below 1.5 CC then u can forget about it)
6. 4G63T Gallant RM 5000++ (if original below 1.6 CC then u can forget about it)
6. 4G63T EVO RM 10000++ (if original below 1.6 CC then u can forget about it)

see your budget lah!
 

Leongyew

Known Member
Senior Member

Leongyew

Known Member
Senior Member
Thread starter
May 9, 2005
122
0
3,016
Malaysia
hi

hmm.... i dont think so i have so much money to change....i got only 3800 someting like tat....damm.... but thank for your info....
 

Leongyew

Known Member
Senior Member

Leongyew

Known Member
Senior Member
Thread starter
May 9, 2005
122
0
3,016
Malaysia
hi

my god 8k plus....hmm.... if i wan to change normal 1.6 or 1.8 how much will it cost?

if i use back my stock engine wat should i change?nw my car top speed is 145km damm slow...damm...
 
Last edited:

badbadguy

Active Member
Senior Member

badbadguy

Active Member
Senior Member
Apr 28, 2005
48
0
3,006
the prices will also depend on the workshop
now i plan to change to 4G91 soon and one workshop quote me for RM 2900 on the road with almost everything (including tear and wear) but without JPJ
quite low right???
so maybe can get cheaper for the mivec also
 

craziechild

500 RPM
Senior Member

craziechild

500 RPM
Senior Member
May 11, 2005
596
4
3,018
Sarawak
what about changing the ecu's only?

i am driving a Proton Wira 1.6 XLi... is it possible to change the stock Ecu to a MIVEC one??? how much will it roughly cost???
 
Last edited:

rodneyk

Known Member
Senior Member

rodneyk

Known Member
Senior Member
Apr 11, 2005
412
0
3,016
Penang
badbadguy said:
wira actualy got few engine to convert
from the bottom to upper (all auto engine will be cheaper)
1. 4G91 about RM 4000 for every thing manual
2. 4G92 Dohc- non mivec RM 6000
3. 4G92 Mivec RM 7000++
4. 4G93 (GTI or Putra or mitsubishi also have) RM 6000 (if original below 1.5 CC then u can forget about it)
5. 4G93T GSR RM 7000++ (if original below 1.5 CC then u can forget about it)
6. 4G63T Gallant RM 5000++ (if original below 1.6 CC then u can forget about it)
6. 4G63T EVO RM 10000++ (if original below 1.6 CC then u can forget about it)

see your budget lah!
bro the price you quoted are extremely high. There are places much cheaper.
4g91 could get it for about 2300 half cut
4g93t rs could get it for about 6k or less half cut
4g63t could get it for 7k plus half cut

these are all prices that me and my friends got when i followed them to get their half cuts
 

rodneyk

Known Member
Senior Member

rodneyk

Known Member
Senior Member
Apr 11, 2005
412
0
3,016
Penang
thteh86 said:
4g91 with JPJ, like he said, 4k...
wah very ex lor
friend got about 3200 with jpj
 

rodneyk

Known Member
Senior Member

rodneyk

Known Member
Senior Member
Apr 11, 2005
412
0
3,016
Penang
thteh86 said:
3200 without spareparts? transplant? the cheapest 4g91 i ever heard is 2k with quite a low mileage, 1k transplant and 1k for spareparts
the engine if i not mistaken he got it for 1800 only with quite a low mileage
the spareparts he need mainly the seal, gasket, etc. the rest all still okay
transplant Rm500 only if you know where to find. and the foreman is really good at it.
By the way this is the price quoted for Ipoh parts,Kedah Parts and Perlis foreman.
:)
down south is mor eexpensive.
:)
 

rodneyk

Known Member
Senior Member

rodneyk

Known Member
Senior Member
Apr 11, 2005
412
0
3,016
Penang
thteh86 said:
4g91 is in demand nowadays, i guess the price has increased though
yea possible
i wanted to get that engine as well
cause it could use a 4g93 turbo kit
but end up selling my car
lol
no more mitsu engines for me
if ever i'll be using a mazda b8 210
 

speedking

500 RPM
Senior Member

speedking

500 RPM
Senior Member
Nov 17, 2003
880
0
3,016
proton 1.6 sohc is very potential....dun listen to others... with the appropriate mod, u can tarpao stock 1.6 mivec no problem
 

rodneyk

Known Member
Senior Member

rodneyk

Known Member
Senior Member
Apr 11, 2005
412
0
3,016
Penang
speedking said:
proton 1.6 sohc is very potential....dun listen to others... with the appropriate mod, u can tarpao stock 1.6 mivec no problem
wahhhhhhhhhhh proton's 1.6 that potential?
if you say 4g18 potential i believe la
but proton 1.6 wor
i drove it before the stock is very strong but mivec feels stronger
 

badbadguy

Active Member
Senior Member

badbadguy

Active Member
Senior Member
Apr 28, 2005
48
0
3,006
i had said already,
got workshop quoted me RM 2900 for every thing except JPJ
this will all depend on the work shopt wanna chop u or not!

some place installation RM 600 some place RM 1300
depend on your decision

my prices is the market prices lah (KL not those kampung kampung)
you can always go to have a quote
 

rodneyk

Known Member
Senior Member

rodneyk

Known Member
Senior Member
Apr 11, 2005
412
0
3,016
Penang
badbadguy said:
i had said already,
got workshop quoted me RM 2900 for every thing except JPJ
this will all depend on the work shopt wanna chop u or not!

some place installation RM 600 some place RM 1300
depend on your decision

my prices is the market prices lah (KL not those kampung kampung)
you can always go to have a quote
wah means the with jpj very ex lo
hehehehee
from 2900 can reach 4000
ganas
 

seong

Known Member
Senior Member

seong

Known Member
Senior Member
Apr 15, 2005
113
0
3,016
proton 1.6kah???hehe...dis is interesting.go kedai potong find the 1.8dohc HEAD plus the injector onli.a New timing belt.can consider the plugs n cable too.plug n play n c the diff.tell us then. :O) so convenient..so cheap..so UmmHhhh....lolz
 

speedking

500 RPM
Senior Member

speedking

500 RPM
Senior Member
Nov 17, 2003
880
0
3,016
rodneyk said:
wahhhhhhhhhhh proton's 1.6 that potential?
if you say 4g18 potential i believe la
but proton 1.6 wor
i drove it before the stock is very strong but mivec feels stronger
with appropriate mod...
one of my fren 1.6 sohc mod can tarpao mivec stock
 

badbadguy

Active Member
Senior Member

badbadguy

Active Member
Senior Member
Apr 28, 2005
48
0
3,006
rodneyk said:
wah means the with jpj very ex lo
hehehehee
from 2900 can reach 4000
ganas

no lah dude
is some workshop quote RM 4000 kau tiam every thing
some quote RM 2900 every thing except JPJ

doesnot mean that the JPJ will cost 1100

because let say the first workshop charge RM 600 for installation RM xxx for tear and wear part
and the second charge 1300 for installation RM xxxxx for tear and wear part

therefore the prices are various from shop to shop

(who want to let the expensive workshop do the job??? except their workmanship are extremely good)

Quality don't come cheap
 
Last edited:

thteh86

2,000 RPM
Senior Member

thteh86

2,000 RPM
Senior Member
Sep 6, 2004
2,865
0
3,136
Subang Jaya, Ma
Visit site
badbadguy said:
no lah dude
is some workshop quote RM 4000 kau tiam every thing
some quote RM 2900 every thing except JPJ

doesnot mean that the JPJ will cost 1100

because let say the first workshop charge RM 600 for installation RM xxx for tear and wear part
and the second charge 1300 for installation RM xxxxx for tear and wear part

therefore the prices are various from shop to shop

(who want to let the expensive workshop do the job??? except their workmanship are extremely good)

Quality don't come cheap
bro, 2900 for everything except for jpj? go tell this to anybody in zth, u earn maybe 200 only, also can earn a lot
 

craziechild

500 RPM
Senior Member

craziechild

500 RPM
Senior Member
May 11, 2005
596
4
3,018
Sarawak
speedking said:
proton 1.6 sohc is very potential....dun listen to others... with the appropriate mod, u can tarpao stock 1.6 mivec no problem
what kind of mod you are talking bout??? can list them? i am driving one proton 1.6 sohc also... so kinda interested with your claims....
 
Last edited:

seong

Known Member
Senior Member

seong

Known Member
Senior Member
Apr 15, 2005
113
0
3,016
craziechild said:
what kind of mod you are talking bout??? can list them? i am driving one proton 1.6 sohc also... so kinda interested with your claims....


prepare bout RM700plus minus and go h/cut shop find 1.8DOHC's HEAD and get urself a new timing belt.change to better plug n cable.all plug n play.hehe...u'll know the power la.1.6 piston's stamina very good.those cheap cheap yet power mali.can be consider.dun say tar pao stock ka mod ka mia mivec/1.8engine. can TIONG their back oledi lansi.like those back in KESAS highway time..1st place Vtec TUrbo 2ndplace Vtec 3rd Wira1.8engine n sometimes 1st Vtec Turbo 2Nd Wira 3rd Vtec.main main ka....sekian tima kasih.1cent nia.
 

craziechild

500 RPM
Senior Member

craziechild

500 RPM
Senior Member
May 11, 2005
596
4
3,018
Sarawak
seong said:
prepare bout RM700plus minus and go h/cut shop find 1.8DOHC's HEAD and get urself a new timing belt.change to better plug n cable.all plug n play.hehe...u'll know the power la.1.6 piston's stamina very good.those cheap cheap yet power mali.can be consider.dun say tar pao stock ka mod ka mia mivec/1.8engine. can TIONG their back oledi lansi.like those back in KESAS highway time..1st place Vtec TUrbo 2ndplace Vtec 3rd Wira1.8engine n sometimes 1st Vtec Turbo 2Nd Wira 3rd Vtec.main main ka....sekian tima kasih.1cent nia.
so the RM 700 including the installation one ah?? so what bout fuel comsumption??? higher??? lower??? the head can simply change one la??? one more thing... i wan to know why when i change my air cleaner to the mushyroom head ah... then when i start my car at the meter panel... the "CHECK ENGINE" light won't go off de??? why like tht ah???
 

thteh86

2,000 RPM
Senior Member

thteh86

2,000 RPM
Senior Member
Sep 6, 2004
2,865
0
3,136
Subang Jaya, Ma
Visit site
seong said:
prepare bout RM700plus minus and go h/cut shop find 1.8DOHC's HEAD and get urself a new timing belt.change to better plug n cable.all plug n play.hehe...u'll know the power la.1.6 piston's stamina very good.those cheap cheap yet power mali.can be consider.dun say tar pao stock ka mod ka mia mivec/1.8engine. can TIONG their back oledi lansi.like those back in KESAS highway time..1st place Vtec TUrbo 2ndplace Vtec 3rd Wira1.8engine n sometimes 1st Vtec Turbo 2Nd Wira 3rd Vtec.main main ka....sekian tima kasih.1cent nia.
come la, 1.6 can plug in 1.8 DOHC head? let's say u can, then timing belt and plug cable, no need say much, i take stock MIVEC run with u want? 5000 bucks stake
 

Yong_5290

3,000 RPM
Senior Member

Yong_5290

3,000 RPM
Senior Member
Nov 4, 2004
3,637
49
3,148
Klang
hotmail.com
thteh86 said:
come la, 1.6 can plug in 1.8 DOHC head? let's say u can, then timing belt and plug cable, no need say much, i take stock MIVEC run with u want? 5000 bucks stake
erm..bro...1.6 4g92p can use 4g91 dohc head also lol...
 

Yong_5290

3,000 RPM
Senior Member

Yong_5290

3,000 RPM
Senior Member
Nov 4, 2004
3,637
49
3,148
Klang
hotmail.com
craziechild said:
what kind of mod you are talking bout??? can list them? i am driving one proton 1.6 sohc also... so kinda interested with your claims....
there's a saying...the 1 wit deepest pocket wins...;)

many things u can do...c how much u willing 2 spend onli...
like putting in dohc head...port n polish...engine blue print n balancing...
thinner metal gasket 2 make the compression higher...strengten internal...(this 1 sum1 teach me go do in chan sow lin...but i dunno how 2 go...ehehhe)

there's 1 guy using 4g91 NA mod...5k...ahahha.....gsr wit a bit mod stuff here n there...vr4 intercooler...yum yum...but tat gsr full throttle edi the 4g91 still bhind him...of coz near lah...wat 4 mention if a few tiang lampu away rite....
 

Leongyew

Known Member
Senior Member

Leongyew

Known Member
Senior Member
Thread starter
May 9, 2005
122
0
3,016
Malaysia
hello

4g91 pluss install without jpj.... how much it is?and wat is twin carburator?
 
Last edited:

Leongyew

Known Member
Senior Member

Leongyew

Known Member
Senior Member
Thread starter
May 9, 2005
122
0
3,016
Malaysia
hi

just only right?i ask d in klang 4g91 plus install and jpj everything is 3800 something below 4....
 

Yong_5290

3,000 RPM
Senior Member

Yong_5290

3,000 RPM
Senior Member
Nov 4, 2004
3,637
49
3,148
Klang
hotmail.com
thteh86 said:
1.6 cc also

but by the way, even if an SOHC engine putting a DOHC gsr 4g93 head, do u think it can actually beat MIVEC 4g92?
i've check from web...1.2cc onli...
but seriously adding 1 dohc head sure cannot win mivec..
if can win then all 4g92p also put dohc loh...nonit mivec edi rite:)