TYPE R vs JUN 3 vs TODA C cams Dyno comparison

[wildz]

Was at my friends place already when I noticed the BuddyClub there. And I scared to go see the BuddyClub. Too delicious.

Riezal just a question. Hey you went to a house behind Petronas in Tmn Tun around 6+ on Wed issit? Black EK?

I think I saw you lar like that. Damn gaya just cucuk straight into your frens house only hahaha

 

[basahboy]

Same lift but extra 3 degree of duration....but ITR 00-01 = CTR cams.

Agreed...the intake lift differs by 3mm but exhaust lift da same...

FYI, ITR '96 n '98 spec although same hp at 200 but the torque, '98 specs has about 4ft/lb more...interesting....

 

[zero4]

that little bit of torque difference wont really makes any difference though

 

[basahboy]

as i say it is info...aduhhhhh lemah aku....

 

[zero4]

i'm just making my comments upon the info given

 

[Johnny_9]

Compression

Results cud be diff if high compression pistons used..

There no comment

 

[minivan]

I found this a mag i have....

Action Angle

B16A2 235
B16B 247
B18CR 245
Spoon 256
Toda C 264
JUN 3 264

i don't know what an action angle is. Does anybody know??
But obviously, the results for mid range power, peak power, HP and torque would differ on the dyno.... like the R cams licked both toda and JUN in mid range....

 

[hattech-v]

i think that angle maybe the degree...

 

[minivan]

yeah... it probaly is....

coz i got this info from the SCC mag... americans sometimes use different terms...

 

[basahboy]

I found this a mag i have....

Action Angle

B16A2 235
B16B 247
B18CR 245
Spoon 256
Toda C 264
JUN 3 264

i don't know what an action angle is. Does anybody know??
But obviously, the results for mid range power, peak power, HP and torque would differ on the dyno.... like the R cams licked both toda and JUN in mid range....

Hmm...many times i hear that Jun 3 is better than Toda C...any ideas why?..or it is just gut feeling???

 

[hattech-v]

i think it same.. just gut feeling maybe... july cam maybe better... hehe

 

[hattech-v]

any other cam for b-series more than 264?

 

[HanafyEG]

spoon, good for vtec turbo..hehe

 

[WalBro(Apexi)]

Rocket M22 also a very good for b-seires.gain better than jun3!

 

[hattech-v]

how about re-profiling the cam? is that good idea or just a waste bcoz heard it will not long lasting.. is it true?