lancer cs3 owner plz come in...

chubbyboyz

Known Member
Senior Member
Apr 23, 2009
94
3
1,508
hi, all mloc bro n sis:wavey:

may i know how many member of us drive lancer cs3??
some bro has mod his cs3 plz share with me
i would like to hear de advice from all of u about this car
coz this kind of species is rare..lolz


every 1 plz feel free to answer, juz a topic to discuess



happy chinese new year
 

chubbyboyz

Known Member
Senior Member
Thread starter
Apr 23, 2009
94
3
1,508
Hi chubbyboyz ,
I'm cs3 owner from Sabah ... =)
andy, u got do any modifiedcation for ur car??
u consider its a good car??
wat feeling this car bring to u?

got alot aftermarket parts for this model?
 

andychua

Known Member
Senior Member
Jul 6, 2006
116
0
1,516
Sabah
Hi chubbyboyz ,
- kinda hard to get aftermarket parts, mostly wana modify but some are same as Proton waja's model .
- Is a good car n comfort ofcos dun compare with Evo ...
- Some OEM Spare part kinda expensive
 

ronaldinho_375

Known Member
Senior Member
Oct 18, 2004
169
3
3,018
Kuala Lumpur
bro,
i'm 1 of the owner the very SLOW MOTION CS3..
already change
Powerzone 4-2-1, mid & end muffler
Powerzone camshaft
Powerzone camgear
Mytheology crank pulley
Work Eng. Fuel Pressure Regulator
Gab Hi-Low/soft-hard
17' work emotion
evo 7/8/9 K&N drop in filter
Guangdao volt stabilizer
photo conducted pressure plus power accelerator
ultra racing strut bar
& 2-3 thing i cant recall now..

conclusion.... dont change anything save ur money. when enough convert to e7 like dewa lavau
puas hati ....
 
Last edited:

andychua

Known Member
Senior Member
Jul 6, 2006
116
0
1,516
Sabah
Hi ronaldinho_375,
May I know hw much u get d Powerzone camshaft and Powerzone camgear ? Cz I'm looking for it also .. Do u change ur valve spring as well ?
 

ronaldinho_375

Known Member
Senior Member
Oct 18, 2004
169
3
3,018
Kuala Lumpur
Hi ronaldinho_375,
May I know hw much u get d Powerzone camshaft and Powerzone camgear ? Cz I'm looking for it also .. Do u change ur valve spring as well ?
camshaft rm1400 trade in with our ori cam
camgear rm390 trade in with our ori camgear
4-2-1 if not mistaken rm400++
centre bullet rm190
muffler rm400++

at powerzone itself i spend rm3k & get about 20%++ increase response ( i dont know wether it about torque or hp)
u can test drive my car to feel the respond b4 planning to proceed...

our car is very ok compare to other's model 1.6 NA just bcoz we want more power then become not satisfy like me... alwaz not satisfy.. hahahahahaha
 

andychua

Known Member
Senior Member
Jul 6, 2006
116
0
1,516
Sabah
camshaft rm1400 trade in with our ori cam
camgear rm390 trade in with our ori camgear
4-2-1 if not mistaken rm400++
centre bullet rm190
muffler rm400++

at powerzone itself i spend rm3k & get about 20%++ increase response ( i dont know wether it about torque or hp)
u can test drive my car to feel the respond b4 planning to proceed...

our car is very ok compare to other's model 1.6 NA just bcoz we want more power then become not satisfy like me... alwaz not satisfy.. hahahahahaha

Same as me ... I had change few things also ...
1.Fuel Pump
2.Fuel regulator
3.4-2-1 extractor with Bullet
4.cam pulley
5.Alu crank pulley
6.earth wire
now currently looking for camshaft can you give me Powerzone contact no. ?
 

chubbyboyz

Known Member
Senior Member
Thread starter
Apr 23, 2009
94
3
1,508
bro,
i'm 1 of the owner the very SLOW MOTION CS3..
already change
Powerzone 4-2-1, mid & end muffler
Powerzone camshaft
Powerzone camgear
Mytheology crank pulley
Work Eng. Fuel Pressure Regulator
Gab Hi-Low/soft-hard
17' work emotion
evo 7/8/9 K&N drop in filter
Guangdao volt stabilizer
photo conducted pressure plus power accelerator
ultra racing strut bar
& 2-3 thing i cant recall now..

conclusion.... dont change anything save ur money. when enough convert to e7 like dewa lavau
puas hati ....
dewa change evo7 engine as well??
ronaldinho, how much for the gab adjustable?
good performant?

---------- Post added at 12:31 AM ---------- 6 hour anti-bump limit - Previous post was at 12:24 AM ----------

Same as me ... I had change few things also ...
1.Fuel Pump
2.Fuel regulator
3.4-2-1 extractor with Bullet
4.cam pulley
5.Alu crank pulley
6.earth wire
now currently looking for camshaft can you give me Powerzone contact no. ?
andy, i think powerzone got his own webside wat... u can check over tht side
 

andychua

Known Member
Senior Member
Jul 6, 2006
116
0
1,516
Sabah
dewa change evo7 engine as well??
ronaldinho, how much for the gab adjustable?
good performant?

---------- Post added at 12:31 AM ---------- 6 hour anti-bump limit - Previous post was at 12:24 AM ----------


andy, i think powerzone got his own webside wat... u can check over tht side
ok, thanks !
I'm using GAB adjustable Hi/Lo w/o soft hard .. haha
 

wonderkid

500 RPM
Senior Member
Jul 8, 2005
508
13
1,518
Labuan & Sabah
cs3 owner from Labuan....

I think andy & ronaldinho know me. Not so much modification done on my ride.. only the accolade bodykit & volk racing rims make my car look 'garang'.

A good & comfortable ride. will let go my car this year...:bawling:
 

DewA_LavaU

1,500 RPM
Senior Member
Jan 11, 2004
1,963
163
3,163
Bintulu
CS3A owner here from Bintulu Sarawak :) I used to convert mine with E7 engine but sell it off already the engine to one of my friend drive Lancer MX :)

As a request from my late friend KJ I will bought another ride. This time gonna be a real Evo :) Evo8 MR weeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee~
 

chubbyboyz

Known Member
Senior Member
Thread starter
Apr 23, 2009
94
3
1,508
ok, thanks !
I'm using GAB adjustable Hi/Lo w/o soft hard .. haha
how how how??? the adjustable nice?? how much?
i planing to buy 1set for my ride, have some 1 hear befor d2 brand?

---------- Post added at 12:12 PM ---------- 6 hour anti-bump limit - Previous post was at 10:47 AM ----------

cs3 owner from Labuan....

I think andy & ronaldinho know me. Not so much modification done on my ride.. only the accolade bodykit & volk racing rims make my car look 'garang'.

A good & comfortable ride. will let go my car this year...:bawling:
so wat ur next car planing to buy?? dont tell me is an evo..:biggrin:
 

andychua

Known Member
Senior Member
Jul 6, 2006
116
0
1,516
Sabah
cs3 owner from Labuan....

I think andy & ronaldinho know me. Not so much modification done on my ride.. only the accolade bodykit & volk racing rims make my car look 'garang'.

A good & comfortable ride. will let go my car this year...:bawling:
Bro,
U buying Evo X manual ?

---------- Post added at 12:50 PM ---------- 6 hour anti-bump limit - Previous post was at 12:48 PM ----------

how how how??? the adjustable nice?? how much?
i planing to buy 1set for my ride, have some 1 hear befor d2 brand?

---------- Post added at 12:12 PM ---------- 6 hour anti-bump limit - Previous post was at 10:47 AM ----------



so wat ur next car planing to buy?? dont tell me is an evo..:biggrin:
Hi,
Heard b4 bt i nvr use d4 absober b4 yet .. not bad la cz u can lower as much as u want .. haha
 

chubbyboyz

Known Member
Senior Member
Thread starter
Apr 23, 2009
94
3
1,508
CS3A owner here from Bintulu Sarawak :) I used to convert mine with E7 engine but sell it off already the engine to one of my friend drive Lancer MX :)

As a request from my late friend KJ I will bought another ride. This time gonna be a real Evo :) Evo8 MR weeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee~
so envy u, lancer upgrade to evo...
 

Random Post Every 5 Minutes

Hi Mod sifus... Just want to ask your opinion on this...

I have a wira 1.6 Aeroback with Promote Bumper... Currently using APM Sport Springs but it is too low...

So was wondering if changing to Eibach Prokit would it solve the issue above? I know the comfort would be much better...

Or changing to Adjustables a better option? You get the height and comfort? The other day I went to Kakimotor.com and they recommend me to get HWL, and claim it can be as comfortable as Eibach... is this...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience