L2 / L5 ecu mod- no Boost CUT

[ashez]

ok bro...no probz...will be waiting....
bro hope u can help me soon....kinda cant wait to test it

 

[E-Tech]

Roger n out

 

[E-Tech]

ok bro...no probz...will be waiting....
bro hope u can help me soon....kinda cant wait to test it

Bro
hv u tested da new specs component?
How?
Tq

 

[consonar]

wahh.. tis is good... care to share? emel me at [email protected] ...

 

[ashez]

bro juz recived it today...will do it tonite and let u know.....

 

[E-Tech]

wahh.. tis is good... care to share? emel me at [email protected] ...

Email to me your postal address if interested to test this.
And you engine set up.... Tq

---------- Post added at 07:58 AM ---------- 6 hour anti-bump limit - Previous post was at 07:56 AM ----------

wahh.. tis is good... care to share? emel me at [email protected] ...

Email to me your postal address if interested to test this and i will post it to you.
And plz mentionyour engine set up.... Tq

[email protected]

---------- Post added at 08:08 AM ---------- 6 hour anti-bump limit - Previous post was at 07:58 AM ----------

bro juz recived it today...will do it tonite and let u know.....

Rev1 vs Rev2.... which is better?.. boost cut have? Performance better?

 

[ashez]

bro feel like no diffrence la....still kinda da same

 

[E-Tech]

bro feel like no diffrence la....still kinda da same

Bro...
In that case, it is good news.
What was your boost setting? 1.0b, 1.1b or 1.2b..., forgot to tell you, the different
will be after the normal or std boost cut level....

 

[ashez]

i set boost at 1.0

 

[E-Tech]

i set boost at 1.0

Ok. In that case will not notice da improvement.
Anyway, it is confirmed to be better.
So rev2 is best as of now.
Tq.
I hv also send out 1 today to some guy interested.
And got rm20 starbuck coffee

 

[ashez]

will set higher and try later at nite...

 

[E-Tech]

wahh.. tis is good... care to share? emel me at [email protected] ...

Bro, I posted out the component this morning...
After fixed and tested, pls report okay...
If happy, then I wait for my Staarbuck Coffee or Coffee Beans Latte okay...
And you already got SAFC... so can fine tuning..
TQ:wavey:

 

[E-Tech]

Here the link to the write up guys... at perodua thread...
http://www.zerotohundred.com/newforums/perodua/307007-l2-l5-ecu-mod-no-boost-cut.html#post3917207

 

[monster111]

anyone know how to remove kelisa rpm cut? to say 8k..stock is about 7k

 

[l2_turbo]

im that klang guy.... u send the boost chit i hv install my L2 turbo! my car now can boost 2.5bar horse power go to 197.3bhp! boost can go 3bar/3.5bar, coz my meter is 2.5bar boost meter only!
thank you E-TECH help my car settle boost cut.... thank you very much!!

---------- Post added at 06:15 PM ---------- 6 hour anti-bump limit - Previous post was at 06:13 PM ----------

bro, when u come KL call me/pm me! we go genting starbuck coffee! on me! tq...