Haltech Platinum Series

[lozo]

zarique, if you still in doubt, buy the lt10, and learn learn learn and keep on learning... and you will understand.

if you don't bother, just contemplate over the p1000

 

[zarique]

as i would like to rule out LT10s but there many MONSTERS running with it...
just wondering whether i made the rite choice by choosing E6x...?
there are 2 cases i found where E6x could not online with laptop to tune...

1. how many aux out does E6x have?
2. is it 32x32 map also?
3. whats the max rev cut?
4. with output launch control and antilag, can add NOS switching?

thanks, any info much appreciated

 

[Syahz]

as i would like to rule out LT10s but there many MONSTERS running with it...
just wondering whether i made the rite choice by choosing E6x...?
there are 2 cases i found where E6x could not online with laptop to tune...

1. how many aux out does E6x have?
2. is it 32x32 map also?
3. whats the max rev cut?
4. with output launch control and antilag, can add NOS switching?

thanks, any info much appreciated

Zariq

Better u email super dealer HALTECH at sunway or give a call and ask him(Tobi/Thomas).I believe he can give a better answer.Somebody in the forum are nor a Superman and not certified DEALAER.Or u can PM their 1000% their supporter.

---------- Post added at 08:02 AM ---------- 6 hour anti-bump limit - Previous post was at 08:00 AM ----------

zarique, if you still in doubt, buy the lt10, and learn learn learn and keep on learning... and you will understand.

if you don't bother, just contemplate over the p1000

Good idea BOY...wah now u learn rrrrr...

 

[E6XLancer]

Zariq

Better u email super dealer HALTECH at sunway or give a call and ask him(Tobi/Thomas).I believe he can give a better answer.Somebody in the forum are nor a Superman and not certified DEALAER.Or u can PM their 1000% their supporter.

You just post my NICK at here.Dont keep SAYING NOTHINGS to peoples thats also can bringing Haltech to Malaysia.If you got Enough MONEY also can order a VOLUME Haltech Products then Haltech can UPLOAD you at MALAYSIA DEALER at their Website.MUST AT HEADQUATERS & NOT OTHER DEALERS AT AUSTRALIA.B4 im joining this Zero100 im seeing you always "KICKING" GT AUTO or as super dealer.How can you living under slogan "1 MALAYSIA" if conduct your BUSINESS likes this.
Body outside there also can buying Haltech directly from Australia under Own Risks but im also "RAGU-RAGU" thats WARRANTY giving by you than GT PRO SHOP.Autralian there im getting my Haltech Stocks also CANNOT Giving me 12 MONTHS Warranty & ONLY SAID WILL INSPECTS IT IF GOT PROBLEM.How comes OH BROTHER SYAHZ...:stupid:

 

[Syahz]

Zariq

Better u email super dealer HALTECH at sunway or give a call and ask him(Tobi/Thomas).I believe he can give a better answer.Somebody in the forum are nor a Superman and not certified DEALAER.Or u can PM their 1000% their supporter.

You just post my NICK at here.Dont keep SAYING NOTHINGS to peoples thats also can bringing Haltech to Malaysia.If you got Enough MONEY also can order a VOLUME Haltech Products then Haltech can UPLOAD you at MALAYSIA DEALER at their Website.MUST AT HEADQUATERS & NOT OTHER DEALERS AT AUSTRALIA.B4 im joining this Zero100 im seeing you always "KICKING" GT AUTO or as super dealer.How can you living under slogan "1 MALAYSIA" if conduct your BUSINESS likes this.
Body outside there also can buying Haltech directly from Australia under Own Risks but im also "RAGU-RAGU" thats WARRANTY giving by you than GT PRO SHOP.Autralian there im getting my Haltech Stocks also CANNOT Giving me 12 MONTHS Warranty & ONLY SAID WILL INSPECTS IT IF GOT PROBLEM.How comes OH BROTHER SYAHZ...:stupid:

Are going the haltech office before?On june im going again and i can ask him about the warranty for u

 

[bebolagalas T]

Dont fight2 la..
Q: Where do I obtain the tuning software?
The tuning software comes on a programming CD at the time of purchase. Alternatively you could visit the Downloads page on the Haltech website to download the tuning software.

Q: Do Haltech products have Warranty?
Yes, Haltech warrants its products to be free from any fault due to materials or workmanship for a period of 12 months from the date of purchase.

We can find any info on the net right now..info from haltech website

 

[Syahz]

I already mansion about this matter before.My be some ppl not under stand about warranty.If someone buy the new haltech ECU from me and install under my certified,100% we give u a warranty and free repair if my mistake.If u buy from me and install with others and broken,short and what ever.U have to pay for freigh and repair.80% when im look about installation haltech,he never solder the wire..and mostly don't no to do Ignition set up proper.SO HOW TO GIVE A WARRANTY.Pls read properly the Haltech Manual book or Help section under Installation.If u say U are pro then me..pls come and see me.I wan to learn with u.I pay U for my learning

 

[E6XLancer]

I already mansion about this matter before.My be some ppl not under stand about warranty.If someone buy the new haltech ECU from me and install under my certified,100% we give u a warranty and free repair if my mistake.If u buy from me and install with others and broken,short and what ever.U have to pay for freigh and repair.80% when im look about installation haltech,he never solder the wire..and mostly don't no to do Ignition set up proper.SO HOW TO GIVE A WARRANTY.Pls read properly the Haltech Manual book or Help section under Installation.If u say U are pro then me..pls come and see me.I wan to learn with u.I pay U for my learning

Not only asking WARRANTY for me coz its not my Business.This your Business Oppunities...to Conduct your SALES...& ASKING HALTECH THERE TO PUT ALSO YOUR BIG NAME AT HALTECH ASAI DEALERS IF YOU ALWAYS PUT THIS WORDS IN YOUR BIG MOUTH AS YOU AS AUTHORISED DEALER IN MALAYSIA ALSO.Let peoples here SATIsFIED to you.
& 1 things thats im NEVER EVER saying im PRO.Thats your PROBLEMS with GT PRO SHOP(macam orang HuTanG you saja). How comes OH brother...

 

[skyboy]

hi bro,

how bout evo 9 which model u recomend

 

[Syahz]

For Mivec evo 9,better for Platinum 1000 plug and play kit.Fast and easy for tuning

 

[Syahz]

Microtech tuner in aussy come and replace the new haltech Platinum series for learning the computer.Look the GAS Motorsport team now all Platinum series he run on their car.After this u can look again from the World Fastest Rotary make a changing to Platinum

 

[nova]

For brands of aftermarket ecu of the same level, I feel it is not the ecu that makes your car perform better. It is whether the person or tuner knows how to use the ecu to tune. A tuner or person who calls himself to be expert in Haltech, it is to be expected that he knows every feature on the haltech ecu that enables him to do the job and achieve whatever target needed.

So, there is really no need to pursue whichever brand so long as the brand has the things you need. After that, it boils down to the tuner's ability to make full use of it to get what you want.

 

[turbine ett]

For brands of aftermarket ecu of the same level, I feel it is not the ecu that makes your car perform better. It is whether the person or tuner knows how to use the ecu to tune. A tuner or person who calls himself to be expert in Haltech, it is to be expected that he knows every feature on the haltech ecu that enables him to do the job and achieve whatever target needed.

So, there is really no need to pursue whichever brand so long as the brand has the things you need. After that, it boils down to the tuner's ability to make full use of it to get what you want.

emmmm....good speech..:proud:but poor of fact..:sleep:..that ur's....

 

[jinkl]

emmmm....good speech..:proud:but poor of fact..:sleep:..that ur's....

wht he jst said is a fact
only a good tuner can fully utilize a EMS , if he is not familiar with the certain EMS , he will not be able to maximize its capability.

simple, u cant ask a doctor to bake a cake , u cant ask a baker to make roads
in other words , EMS is the first tool , 2nd influence is of cos the tuner to fully utilize it

 

[goo_61t]

wht he jst said is a fact
only a good tuner can fully utilize a EMS , if he is not familiar with the certain EMS , he will not be able to maximize its capability.

simple, u cant ask a doctor to bake a cake , u cant ask a baker to make roads
in other words , EMS is the first tool , 2nd influence is of cos the tuner to fully utilize it

word..my man wordddd....hahaha

 

[yopo]

wht he jst said is a fact
only a good tuner can fully utilize a EMS , if he is not familiar with the certain EMS , he will not be able to maximize its capability.

simple, u cant ask a doctor to bake a cake , u cant ask a baker to make roads
in other words , EMS is the first tool , 2nd influence is of cos the tuner to fully utilize it

hehehe..so hard to digest the fact actually..
if the machine can't perform..blame it on the hardware first

then when the hardware is good..blame it on the software later on..

and when the hardware+software are good..if the machine still can't perform..blame it on the TUNER!! wakakaka..

but nowadays the sequence is the other way around for some people..don't blame the TUNER..blame it on the hardware+software even when both are in the best condition..mcm2 :stupid:

 

[Syahz]

Back to MS DOS software...still can use and can make a good performance.may be waste a time to think a new one and moving forward.:proud:But not me...

 

[turbine ett]

wht he jst said is a fact
only a good tuner can fully utilize a EMS , if he is not familiar with the certain EMS , he will not be able to maximize its capability.

simple, u cant ask a doctor to bake a cake , u cant ask a baker to make roads
in other words , EMS is the first tool , 2nd influence is of cos the tuner to fully utilize it

familiar its doesn't meant u able to maximize its capability.....dun 4get talent/skill and wat purpose 4? tuned for money???? or fuc*in else.....

 

[jinkl]

familiar its doesn't meant u able to maximize its capability.....dun 4get talent/skill and wat purpose 4? tuned for money???? or fuc*in else.....

pretty simple, first things first, u dont have to use foul language
talent/skill is more towards tuning that will maximize the cars performance
the "it" refered here is the EMS and not the car, correct me if im wrong
and please use foul language in a proper way, me no understand u english ? especially in this phrase "wat purpose 4? tuned for money???? or fuc*in else" , maybe you could rephrase it for me

in my concept , tuner who is familiar with his EMS and its software is one key factor to MAXIMIZE the EMS functionality , tuner who has skill will use his familiarity of his pursued sofware/ems to maximize the cars performance.

 

[yopo]

pretty simple, first things first, u dont have to use foul language
talent/skill is more towards tuning that will maximize the cars performance
the "it" refered here is the EMS and not the car, correct me if im wrong
and please use foul language in a proper way, me no understand u english speaking ?

what can u expect.."like tuner like the follower.."

 

[jo1]

what can u expect.."like tuner like the follower.."

Nothing can be done... it a nature.

The fact is the follower always 'taksub' if not it will never be called follower...

 

[turbine ett]

wht he jst said is a fact
only a good tuner can fully utilize a EMS , if he is not familiar with the certain EMS , he will not be able to maximize its capability.





simple, u cant ask a doctor to bake a cake , u cant ask a baker to make roads i like this answers.....3rd world thinking.....he..he..he....4 me baker cant be a doctor ( need certification ) n why not baker can make a road.....( part time )......

in other words , EMS is the first tool , 2nd influence is of cos the tuner to fully utilize it

ha..ha..ha..this is 1st world thinking......

 

[jinkl]

ha..ha..ha..this is 1st world thinking......

ooo looks like u wanna play it the hardway , tried to be polite nuff
yopo,goo n jo1 , its quite hard to verse with people from the cartoon world
no facts , only magic show fireworks here n here lolx
looks like u dont know how to generalize
no wonder u failed school , when the picture shows road , u choose the baker and write in bracket (part time) , im laughing my ass off lolx
dont try to be a smart allec , if u wish to post some contribution , please do so , if do not wish to , just keep quiet please and do not disturb others , or do u want me to translate it to some other language for u to understand ?

people learn from others , bt if the ppl have attitude like u , no one is gonna respect for your own stupidity , there are so many knocking on ur door over here, u dont realise or r u stupid enuff not to realise ?

wanna play hard, i will play hard
oh god, please do not translate "knocking on ur door" to "ketuk pintu" and say
shit jin, u have 3rd world thinking, i went to the door just now , no one ketuk my pintu also wakakakakakakkakakaka

learn to talk politely next time , when someone says something, shoot with facts , dont make fun of them and u do not need to use foul language , when someone says something , those who dont know will read and digest it , it doesnt matter whether its jo1 or goo or syah or anyone , we are here to learn , if u do not wish to contribute but to just make fun, i would be please to remove your unwanted posts.

 

[yopo]

ooo looks like u wanna play it the hardway , tried to be polite nuff
yopo,goo n jo1 , its quite hard to verse with people from the cartoon world
no facts , only magic show fireworks here n here lolx
looks like u dont know how to generalize
no wonder u failed school , when the picture shows road , u choose the baker and write in bracket (part time) , im laughing my ass off lolx
dont try to be a smart allec , if u wish to post some contribution , please do so , if do not wish to , just keep quiet please and do not disturb others , or do u want me to translate it to some other language for u to understand ?

people learn from others , bt if the ppl have attitude like u , no one is gonna respect for your own stupidity , there are so many knocking on ur door over here, u dont realise or r u stupid enuff not to realise ?

wanna play hard, i will play hard
oh god, please do not translate "knocking on ur door" to "ketuk pintu" and say
shit jin, u have 3rd world thinking, i went to the door just now , no one ketuk my pintu also wakakakakakakkakakaka

learn to talk politely next time , when someone says something, shoot with facts , dont make fun of them and u do not need to use foul language , when someone says something , those who dont know will read and digest it , it doesnt matter whether its jo1 or goo or syah or anyone , we are here to learn , if u do not wish to contribute but to just make fun, i would be please to remove your unwanted posts.

it's ok jin..what else can we say? :shot:

the same old script when asked to their ex-customers who ran..why jump to another ship?
this so-called "pack" livin in their own world..and assume every one else were uneducated and doing things wrongly..

and that's why they failed to comprehend the meaning of it needs a GOOD TUNER to fully utilize the ems after all the hardware and the software in the machine had been completed!

failed to penetrate the aussy ems market segment (M) ere without no trails of success and jump to another brand (H) later on..
yet we still congratulated them on having a hint of success on the recent SDB..showing some respect and recognition to the achievement made

guess..let him be following his tuner tying the car at the dyno ramp all the time..hahaha
after all..with his level 0f thinking..that's the best that he can do..:sheep:

 

[jinkl]

true, we already congratulated his tuners recent success in SDB , but with a follower like turbine_ett , it will only spoil his reputation lolx