It is a locally fabricate header with SUS304 & Mandrel Bend. It is not a rojak header but specify made for certain model, spotted some design copy Jap brand like toda/ spoon....not cheap neither, around rm1500++but of course new la (this sort of $$ v can get 2nd hand Jap Branded Header)....they are manufactured by Martech based in Melaka and sold in Sunway by H Performance Services...they can be spotted in Hypertune mag as well,actively advertise there with their super bla bla bla exhaust (Super Circuit & etc)...for more detail, please check their web....http://www.h-performance.com.my/
ended up with 2.5 inch i similar to b18c type R header...with that price i would take mugen header....just worry spend 1.5k but end up all diameter on the header is same as b18cR which we can get it less then 1k...
dc5 integra... bought 1 from h performance.. went to exhaust shop but found out had to bend the end part to clear some touching issues... so far no complaint besides that...
Hey guys, i hav just install a twin barrel mikuni carburator in my wira 4g15...the throttle respond seems even worse than my stock carburator le...haih...the secondery only open after 3k while throttle more than 2/1...below 3k rpm i tekan habis the secondery also wont open..haiz..issit normal? top speed decrease, from 185 to 165km/h.........one thing really disapoint me is, all my friend said that my car has less pick up....even when the secondery open, the pull of the engine also has no...
Ask a question, start a discussion or post something for sale!