Bro, my piping is still the stock putra piping. Change the extractor tho. Stainless steel 4-2-1. Wen i say change to almost ori exhaust. Its the muffler only. but anyways, i m so sick of it i change back to my old one d. But i would like to change the extractor. Anytime can go to ur garage rite? Anyways.. where is it? then u can help me check check n c whether can add performance anot.James, quiet means high backpressuring effect and thus, kills your pick up. Comparing with your old setup, you're using straight flow setup and it gives a very powerful dragging power from low to high (estimated your piping size isn't bigger than 2"). Well, that guy said "mei lik" basically you need to tarik until 4krpm-7krpm before shifting to the next gear. Try out first. Btw, when you say change almost all to stock one, you mean even u put back the ori midbox and ori muffler?
---------- Post added at 10:40 PM ---------- 6 hour anti-bump limit - Previous post was at 10:36 PM ----------
.
1.5" piping size is good enough. If u care bout FC, the current stock size can be retained but change the extractor, midbox and rear muffler to something customized for better performance. Careful when choosing as it might end up bad cabin noise.i wanna know, i use kancil with 850cc kelisa engine. how to make my car go smooth? what diameter of pipe can i use?
Ditch the catalytic con will be the fastest way, the rest of the setup, pls pm me, thanks!wira 1.5 auto injection 1...wat can change 2 gain come power?
Hi Waan, you're darn right, it is always recommended to drop by my place if you've modded your exhaust before to avoid any miscommunication. Yes, we open everyday, you can sms me for faster response. Thanks.Bro, my piping is still the stock putra piping. Change the extractor tho. Stainless steel 4-2-1. Wen i say change to almost ori exhaust. Its the muffler only. but anyways, i m so sick of it i change back to my old one d. But i would like to change the extractor. Anytime can go to ur garage rite? Anyways.. where is it? then u can help me check check n c whether can add performance anot.
Thanks
Hi Kelly, I don't touch ECV as there are risk installing that especially it is a manual ECV. There is cases it clogs the exhaust flow due to failure of VALVE closure. However, there is always precautions to take, check properly how the mechanism works and from there, inspect what is needed. Sorry for talking long but I can't help you with the installation. Hope you understand.Bro, I'm keen to install something like this from stock. Does your workshop do this? If so, can you quote me full price and location. Thank you.
http://www.zerotohundred.com/newfor...229-custom-made-exhaust-controller-valve.html
No other option but to add bullet. No significant power drop. I only have the replica version that comes with plug and play silencer.kweng84, i am running 4g63turbo on my satria...my current setup is straight 3" piping to rear 3" muffler...the cabin noise quite loud, plan to reduce it...any option for me? will a midbox sacrifice the power? or u have any super silent 3" rear muffler?
How much hp on wheel? No box in the middle? Your drager new or halfcut? Let me know these..thanks!hai..
i running mivec turbo in my waja. use gsr block. my piping 2.3". i need ur opition if i change to 2.5" or 3.0" piping. now use superdrager my end piping.
Fc is not issue but power and sound. i stay at apartment so need low sound at low rpm.
i currently using same engine like urs bro, but i piping 2.5 " , hks superdrager ori from japan recon taken out from gsr, din feel any significant loud sound during low rpm, but cabin is damn loud..... fc bad toohai..
i running mivec turbo in my waja. use gsr block. my piping 2.3". i need ur opition if i change to 2.5" or 3.0" piping. now use superdrager my end piping.
Fc is not issue but power and sound. i stay at apartment so need low sound at low rpm.
Change gearbox to manual, upgrade clutch (mod flywheel), make custom exhaust extractor (4-2-1 or 4-1), port polish head, and use custom air intake..wira 1.5 auto injection 1...wat can change 2 gain come power?