- Dec 9, 2008
- 1,064
- 17
- 1,638
Wuhaaa haa haa haaa....told you...but you won't listen....haa haa haa haa....Nope ... instead, got hijacked ... Huuuu :rolleyes:
Wuhaaa haa haa haaa....told you...but you won't listen....haa haa haa haa....Nope ... instead, got hijacked ... Huuuu :rolleyes:
Autronic ?
Did you need to purchase the cas sensor separately ?
Dame...you must be RICH to use that as paper weight! Btw, what ECU you are running on, if you don't mind I'm asking about it..thanks yah!Yes, basically you need to purchase the cas disk which last I remembered, doesn't cost much. Basically, it a flat piece of steel or copper with some hole on it. If you can get the template, you can probably make one yourself.
What I have not gotten much out of some people using motec or autronic are, how do they wire the tps out for the attesa. Apparently, the attesa tps signal reads a certain voltage range (something like 0-3.5V) which has a built in module within the oem ecu. Either one has to purchase a separate tps module for the attesa from ecu manufacturer, or built one.
I may be scraping the project to have Autronic due to limited support and knowledge from techs over where I am at. That's why it is used as a paper-weight now ...
Dame...you must be RICH to use that as paper weight! Btw, what ECU you are running on, if you don't mind I'm asking about it..thanks yah!
You looking for plug and play ECU ?
Now all you need is to fine a Tuner that is on the same wavelength as you....
not sure can settle it or not