Accord Euro-R CL7 maintenance..

Jan 13, 2015
3
0
501
Kuala Lumpur
there is a secret FB group for Malaysian CL7 and CL9 users. It was not secret before but due to the abundance of SG scrap cars using cloned plates, the admin decided to change the group to secret. Lots of discussions or point exchanges in the group.
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
I know the ex owner.

The ex owner is a Chinese which brought it back from Australia, so this is AUDM spec.

The car price that this 2nd owner's putting too over-price.
I agree the price seems way over........:smokin:
 

aja

4,000 RPM
Senior Member
Dec 3, 2003
4,696
35
5,148
fuh...this thread still alive?

Fuyo. Long time...hehehe
 

aja

4,000 RPM
Senior Member
Dec 3, 2003
4,696
35
5,148
fuh...this thread still alive?

Fuyo. Long time...hehehe
 

phantomRX8

Insignificant Fool
Senior Member
Mar 21, 2005
331
1
5,018
ISS
Hi guys. Newbie here. Just bought a CL7R. Any suggestion for good workshop seremban / nilai area for servicing and upgrading ? Thanks so much
 

Random Post Every 5 Minutes

My friend who own a mitsu engine with its O2 sensor connect to apexi timer get a very low reading on O2 voltage,0.07 to 0.18volt only.last time it was fine can get normal reading.
sensor already change to another unit but still the same scenario.
the O2 sensor is a 2 wire unit.(blue/white)
i measure the voltage direct from the sensor both wire and get 0.1v same as what shown in the timer.Then i measure with a multimeter,the signal wire (+)and the chasis(-) ground then i get 0.45v...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience