4G93T Club

[Jibong]

hi all,

need help to source some parts for gsr. looking for forged rod and piston 83mm..anybody know where to get it pls let me know...cheers..

 

[ftzone]

Duratech Forged Conrods MYR1500.00
Forged Piston 82mm lo-comp MYR2000.00 (Wiseco or CP)
83mm lo comp rare abit... if got also customised pistons... cost about MYR2400-2500

 

[muskasim]

from where you heard this from? gosh... very misleading statement there.
4G93T engine can be boosted to 1bar without any internal or external modification so whatever provided your turbocharger is still stock (TD04) that is. However, premium grade petrol RON97 is highly recommended if you are boosting at that levels.

e-tech,
5663 ecu common problem cannot start.. because fuel pump relay control easily short circuited.
nowadays alot of GSR going for full standalone like Haltech Sprint 500 as they are affordable.

How much Haltech Sprint 500 ?

 

[Blue>8756]

may i know if i put gti gearbox into my gsr engine, is it ok?
because i'm currently using 1.5 gearbox and got bearing sound already..
wanted to use gsr gbox but need a lot of modification to install.. summore the cost is higher than using 2 wheel gbox.. compare than gsr gb which is better? for pick up n cruising...
need some opinion from u guys..

 

[wongsengming]

a 4g93t have not start for 1 yr plus......what to do? change engine oil, gearbox lsd oil, coolant etc? after that only start the engine?

 

[Lazy_Chai]

Helllllooo All Gsrians!!!!!

Im back from Singapore already!! time to mod my car again. Havent Driven the car for 8months d. But luckilly got ppl to start for me everyday.

Any guidance/advice for me if i wanna change to TD05? what is the lowest cost to replace td05? what other parts i need to replace if i wanna change td05?
Dont want to spend too much cox might be changing car next year feb!.... Advice Sifu's!!!!

 

[yashiofactory]

Hai Lazy Chai long time no see....hehehehe

I tought u already change ur turbine to TD05 bro.....the cheapest way to install TD05 u need to buy the fuel regulator as u use big turbine u need extra fuel on the high rpm...but i think better u dont change ur turbine as u want to sell off ur car...hehehehe

P/S : Bro u want to buy monster car?????

 

[contreasjun27]

hey guys Im getting a bulk of GSR turbo manifold/ Banana Manifold
confirm cheaper price compare to market price..
anybody interested pls let me know as I need about 10 orders to get the cheap price...
it is only RM650 for 1 unit superb mendrel bending by machine.
it is a 2mm thickness stainless steel material.
got TD04/TD05 Flange and T3 Flange.
Interested pls pm me or call me @ 012-2382265

1. contreasjun27
2.
3.
4.

 

[yashiofactory]

Wah what a nice offer for banana but im just finish overhaul my car...huhuhuhu

 

[contreasjun27]

Wah what a nice offer for banana but im just finish overhaul my car...huhuhuhu

hehe overhaul dy means engine is in good condition now is time to make ur engine look handsome hehe

 

[ftzone]

want to be more handsome? try this. going for MYR1300.00 plug and play.

Coil on Plugs! No more messy spark plug wires! Better throttle responds.

 

[remussoon]

hI all, what is the best and safe way to increase hp for stock waja gsr? currently dyno on 185hp. Please to comments, much thanks.

 

[contreasjun27]

want to be more handsome? try this. going for MYR1300.00 plug and play.

Coil on Plugs! No more messy spark plug wires! Better throttle responds.

yup this is very nice indeed....but I prefer bling bling turbo manifold hehe

 

[remussoon]

yup this is very nice indeed....but I prefer bling bling turbo manifold hehe

thanks for your advise, no harm to try lo if got extra money. $1300 for me better to change the ori intercooler to VR4 or evo3 I/C. I budget 3k to up the hp to over 200hp, any possible...please help, all taiko taiko.

 

[contreasjun27]

thanks for your advise, no harm to try lo if got extra money. $1300 for me better to change the ori intercooler to VR4 or evo3 I/C. I budget 3k to up the hp to over 200hp, any possible...please help, all taiko taiko.

3K is a very good money if you spend wisely bro

 

[Alok]

hie gsrian! long time no posting already. wanna ask sifu2 kalian.. what is the compatible/equivalent for gsr (pcd114) front brake pad and rear brake pad? use waja ones? or wira ones? please advise!

same as waja type.

 

[zamiex]

want to be more handsome? try this. going for MYR1300.00 plug and play.

Coil on Plugs! No more messy spark plug wires! Better throttle responds.

waa... how to do the wiring like this ahh?still using power TR i guess?

 

[ehdrian]

want to be more handsome? try this. going for MYR1300.00 plug and play.

Coil on Plugs! No more messy spark plug wires! Better throttle responds.

ray, this is ur engine pic right?...

---------- Post added at 09:50 PM ---------- 6 hour anti-bump limit - Previous post was at 08:04 PM ----------

GSR bros, me currently using gsr CM5A with stock engine and turbine boosting at 1.2bar, wat is the ideal size of exhaust piping recommended?..thank you..

 

[contreasjun27]

ray, this is ur engine pic right?...

---------- Post added at 09:50 PM ---------- 6 hour anti-bump limit - Previous post was at 08:04 PM ----------

GSR bros, me currently using gsr CM5A with stock engine and turbine boosting at 1.2bar, wat is the ideal size of exhaust piping recommended?..thank you..

2.5'' is more than enough bro...

 

[wailup]

want to be more handsome? try this. going for MYR1300.00 plug and play.

Coil on Plugs! No more messy spark plug wires! Better throttle responds.

wow... nice ler.. looks more hi-tech (handsome)