1. Bump posts missing? We are spring cleaning the Forums so these posts are being removed to optimize the database further. Don't be concerned, you can continue to do whatever you do. Will be developing the site further as well through the coming weeks so do watch out for those! You can close this notice now
    Dismiss Notice

Show us your lancer/evo pics!

Discussion in 'Mitsubishi Lancer Owners Club' started by ][zoohalee][vtec][, Sep 23, 2008.

  1. marsha1l_v6

    marsha1l_v6 5 Year | Silver

    Joined:
    Aug 1, 2013
    Messages:
    627
    Likes Received:
    113
    not normal ke? i thought its common especially for those convert engine...maybe not the high speed cruise..hahaha

    u can test on open empty road instead of join dragday..

    well, its my car for outstation/weekend/fun, those scenario bring confidence in its reliability. :rock:
     
  2. vr2turbo

    vr2turbo 5 Year | Silver
    Helmet Clan Moderator

    Joined:
    May 11, 2010
    Messages:
    29,005
    Likes Received:
    8,125
    Must make new P sticker with small t at the bottom.......hhahahhahaha
     
  3. 6UE5t

    6UE5t Senior Member
    Senior Member

    Joined:
    Oct 8, 2010
    Messages:
    6,246
    Likes Received:
    1,191
    Bro, I'm really interested in this SCG1 but based on your comments the boost controller is not as complete. But I like the all-in-one packaging as it's cleaner inside the cockpit and cheaper as a total. I'm considering these options now:
    1. Get this SCG1, or
    2. Get the AEM 30-4900 A/F failsafe plus the Profec (either the older B or the newer Oled) which should be the most expensive option, or
    3. Get just the more basic AEM A/F meter only plus the Profec. Of course this means no failsafe.

    I'm thinking to run maybe 1.3-1.4 bar for normal boost then 1.7 bar for high boost. Which options seems more suitable?
     
  4. 6UE5t

    6UE5t Senior Member
    Senior Member

    Joined:
    Oct 8, 2010
    Messages:
    6,246
    Likes Received:
    1,191
    P Evo driver.
     

    Attached Files:

  5. marsha1l_v6

    marsha1l_v6 5 Year | Silver

    Joined:
    Aug 1, 2013
    Messages:
    627
    Likes Received:
    113
    i would go scg1 +remap ecu.

    scg1 dependable on your wastegate spring, it cant set boost lower than your wastegate spring rate. Hence, getting tial wastegate is good pair. Tial provide various spring vs turbosmart only provide single setup spring.

    https://www.innovatemotorsports.com/support/manual/SCG-1 Manual.pdf <<-- try take a look at its feature.

    for your setup, you use wastegate with 1.3 spring rate then use scg1 to increase the boost.

    BUT, if you want to change hi/low boost on the go, profec +AEM failsafe is for you. Profec ebc is not dependable on your wastegate spring.
     
  6. 6UE5t

    6UE5t Senior Member
    Senior Member

    Joined:
    Oct 8, 2010
    Messages:
    6,246
    Likes Received:
    1,191
    How do you switch boost in SCG1? Can it be done quickly like just 1 button press?
     
  7. 6UE5t

    6UE5t Senior Member
    Senior Member

    Joined:
    Oct 8, 2010
    Messages:
    6,246
    Likes Received:
    1,191
    Update, only got 348.7km for 46.7 ltrs or about 7.3km/ltr.
     
  8. gunnerzz

    gunnerzz 5 Year | Silver

    Joined:
    Jul 3, 2014
    Messages:
    1,715
    Likes Received:
    541
    Just when i tot my ol Pajero is bad enough..
    When my Pajero is driven in its nature (offroad), it will gulp 1/4 tank in 20min. Mind u thats well below 40kmh due to the terrain and thats on 4H(should have gone for 4L to makes it easier).Makes me wonder what is your figure when your Evo is in its nature...4km/l?
     
  9. 6UE5t

    6UE5t Senior Member
    Senior Member

    Joined:
    Oct 8, 2010
    Messages:
    6,246
    Likes Received:
    1,191
    When I boost it often, it can only reach about 5km/ltr.
     
  10. marsha1l_v6

    marsha1l_v6 5 Year | Silver

    Joined:
    Aug 1, 2013
    Messages:
    627
    Likes Received:
    113
    currently using method switching off the 3port solenoid/fail safe. since im running stock wastegate spring 1bar, and i know if my engine running lean, because happen before. hahah

    if i want higher boost, switch on the 3port solenoid/failsafe.

    switching to and fro via single action.

    reflash your ecu , you'll get slightly better mileage. anyhow, better rich than lean :pepsi:
     
    6UE5t likes this.
  11. sweelt

    sweelt Well-Known Member

    Joined:
    Nov 6, 2016
    Messages:
    2,141
    Likes Received:
    196
    got turbo but try not to boost.
    Those without turbo shoot like rocket. hahaha....
     
    Izso likes this.
  12. 6UE5t

    6UE5t Senior Member
    Senior Member

    Joined:
    Oct 8, 2010
    Messages:
    6,246
    Likes Received:
    1,191
    Hmm sounds good if can switch in just 1 quick action. Need to see how it's setup and done. I'll pm you later.
     
  13. vr2turbo

    vr2turbo 5 Year | Silver
    Helmet Clan Moderator

    Joined:
    May 11, 2010
    Messages:
    29,005
    Likes Received:
    8,125
    Yup, turbo better run rich than burn the engine.... Haha
     
  14. marsha1l_v6

    marsha1l_v6 5 Year | Silver

    Joined:
    Aug 1, 2013
    Messages:
    627
    Likes Received:
    113
    technically need to press both button few sec for enable/disable solenoid control.

    if u decide to remap, try ask tuner if its possible to add switch for high and low boost.
     
    6UE5t likes this.
  15. 6UE5t

    6UE5t Senior Member
    Senior Member

    Joined:
    Oct 8, 2010
    Messages:
    6,246
    Likes Received:
    1,191
    Guys I'm still undecided now between running an external 38 wastegate or just getting an uprated internal gate actuator, for example 18psi actuator. I am currently leaning towards just getting the uprated actuator coz it's minimal mod without needing to do piping mods but mostly people say external is still better and more stable at managing boost.

    Btw I have bought a Profec B Spec 2 and I want to keep using the stock turbo. Will I still able to set for hi/lo boost mode if still using internal gate?

    Any inputs?
     
  16. marsha1l_v6

    marsha1l_v6 5 Year | Silver

    Joined:
    Aug 1, 2013
    Messages:
    627
    Likes Received:
    113
    with your new ebc, you might not need to find uprated actuator yet.

    if the actuator has lower psi than your intended boost, better be that way. Control the boost by your profec. From the manual, it can be set hi and low setting and able to work with external and internal wastegate.

    in case of ebc malfuntion, atleast it cuts the boost at your stock actuator psi.

    but if you plan to boost up more than double of your stock actuator psi, then upgrade the actuator is good.
     
  17. 6UE5t

    6UE5t Senior Member
    Senior Member

    Joined:
    Oct 8, 2010
    Messages:
    6,246
    Likes Received:
    1,191
    Based on what I can find, stock Evo 9 actuator is around 11-12psi which seems a bit low. The other reason to upgrade to stronger one is also ability to hold boost better at higher rpms.

    My target max boost probably won't exceed 25psi coz that's what I read the limitation also for the stock BOV before I need to upgrade that one also (which I don't prefer for now). Therefore I am thinking an 18psi actuator might fit the bill, ir maybe just 14psi? Or should I just go with external altogether? I'm actually trying to keep it as simple as possible just to optimise the stock turbo and engine. (Btw engine wise I just bought Greddy 264 cams only).
     
  18. marsha1l_v6

    marsha1l_v6 5 Year | Silver

    Joined:
    Aug 1, 2013
    Messages:
    627
    Likes Received:
    113
    if thats the case, go for custom piping and external wastegate + new blowoff. Just go one shot with a little room for future/potential upgrade.
     
  19. 6UE5t

    6UE5t Senior Member
    Senior Member

    Joined:
    Oct 8, 2010
    Messages:
    6,246
    Likes Received:
    1,191
    Wah much more costly! Lol
     
  20. vr2turbo

    vr2turbo 5 Year | Silver
    Helmet Clan Moderator

    Joined:
    May 11, 2010
    Messages:
    29,005
    Likes Received:
    8,125
    If you daily your car, do you need so much more power? Bro. Marshall mod for drag one......:driver::burnout:
     

Share This Page