SATRIA GTI with siemens VDO

[chriz5565]

I wanna ask about satria gti 2004 model ... how shall i mod to increase the power .. i feel sooo because i just bought it recently for 2nd and the power .... what should i do ? Plz tell me how to mod


Christopher

 

[DanzEterna]

the siemens ecu kinda suck bro, mine was 2000 model with MMC ecu, has no speed cut & rev cut. even emanage does not work on siemens, u might need to get SAFC.

 

[chriz5565]

if i use safc means got diff... thnks lot bro ..

 

[kumar22mostwanted]

no lah no lah
siemens best is to just swap it out with a standalone
a lot of power to be explored

 

[chriz5565]

if i change extractor for gti standard.. which i have to choose .. 4-2-1 or 4-1.. sorry im not much knowledge in this ..

 

[Shanashi]

4-2-1

 

[chriz5565]

the standard wan is 4-1 izit?

 

[DanzEterna]

no lah no lah
siemens best is to just swap it out with a standalone
a lot of power to be explored

haha, true. applies to all modded cars too

---------- Post added at 10:22 AM ---------- 6 hour anti-bump limit - Previous post was at 10:18 AM ----------

if i change extractor for gti standard.. which i have to choose .. 4-2-1 or 4-1.. sorry im not much knowledge in this ..

dun worry bro. ok std is 4-2-1, but if u like pick up u go for 4-1, but u lose on the high end.
unless u plan to go for R3 stage 1 extractors.

 

[kumar22mostwanted]

haha, true. applies to all modded cars too

---------- Post added at 10:22 AM ---------- 6 hour anti-bump limit - Previous post was at 10:18 AM ----------



dun worry bro. ok std is 4-2-1, but if u like pick up u go for 4-1, but u lose on the high end.
unless u plan to go for R3 stage 1 extractors.

i thought the extractor that favoured pick up was 4-2-1 and the extractor that favoured top speed was 4-1 :hmmmm::hmmmm::hmmmm:

 

[chriz5565]

thnks bro

 

[jason4883]

the standard wan is 4-1 izit?

Standard one is 4-2-1 and 4-2-1 extractor is meant for end speed while 4-1 setup is meant for pick up.

Correct me if I am wrong with this info.

 

[Izso]

chriz : how much is your budget to mod?

 

[DanzEterna]

yes, correct, 4-1 is meant for pick up. 4-2-1 is more for top end.
if u want of both worlds, get 4-2-1 tuned length

kumar : terbalik la bro.

 

[alwjmonster]

why we cannot swap the ECU? change to MMC ECU from siemens? coz it could cause alot problems? sifu pls correct me

 

[DanzEterna]

can swap. last time my fren did that as well.

 

[Izso]

why we cannot swap the ECU? change to MMC ECU from siemens? coz it could cause alot problems? sifu pls correct me

Can be done but it's not a direct plug and play. The sensors, the TB, intake manifold, wiring, etc etc...

In the end you gotta ask yourself : Is it worth it? Might as well dump in a adaptronic standalone ECU.

 

[kumar22mostwanted]

Can be done but it's not a direct plug and play. The sensors, the TB, intake manifold, wiring, etc etc...

In the end you gotta ask yourself : Is it worth it? Might as well dump in a adaptronic standalone ECU.

OR!!! MICROTECH!!!

 

[chriz5565]

ok now my budget round 3k for time being .. wat should i start 1st bro ???

 

[BuSS79]

intresting...I'm also looking forward to upgrade mine...but dunno where to go and who to refer...any ideas bro...not too expensive la....budget2 ok loo...