Quickshift / Short Shifter

[EFN]

********************************************************************************
NEW Price Revision!

Protons (Wira, Satria, Putra, Saga, Perdana) = RM80.00

Proton Waja = RM70.00

Toyota (Corolla and most FF) = RM60.00

Kelisa & Kenari = RM70.00

Honda Civic & Accord = RM70.00

Mazda/Ford B8/B6 etc = RM70.00


* Price adjustment are made to reflect the actual complexity of modding the shifters on different cars, like Protons (except WAJA), 6 section welds are required and Toyota only 2 section.

Hope u guys can understand. Thanks!!!

********************************************************************************

Modify your current shifter to Short Throw Quick Shift.

Terms & Condition:
- Uses the original shifter
- Requires cutting, extension weldings & sometimes hammering of shifter base
- No cutting of cables
- Will not effect gearbox
- Shifter feel can be adjusted for soft or hard shifting.
For cars using cable type shifters (Protons, Toyota etc) Other make of cars will have to inspect first at no charge

Why buy custom quickshift for RM150 to RM250 when you can simply just mod your existing shifters?

Honestly, this is a D.I.Y option, but if you don't want to go through all the hassles just gimme a call for appointment. thanks

Phone: 012-2407780
Map1 From MRR
http://img.photobucket.com/albums/v645/EFN/MAP.jpg


Map 2 from KL
http://img.photobucket.com/albums/v645/EFN/Workshop.jpg

 

[fable_faiz]

kelisa can?
how long will it take?
im staying in subang

 

[EFN]

Originally posted by fable_faiz@Jan 6 2005, 02:00
kelisa can?
how long will it take?
im staying in subang

We can set up a meeting for me to inspect your car. If can safely mod then only I'll do it - how's that? very likely it is possible.

For actual mod work, it will be done near JPJ Wangsa maju area (my welders are there) - next to Wei Yip exhaust shop.

just call me to confirm. TQ

 

[fable_faiz]

sounds convincing enough.
i'll call u tmw.
btw, can u please sms me the address to the place
012-6338687

serious buyer here..
thanks bro.

 

[g88]

done near JPJ Wangsa maju area (my welders are there) - next to Wei Yip exhaust shop.

The row of workshops ? What the name then ? Maybe i know your welder :lol:

 

[EFN]

Originally posted by g88@Jan 6 2005, 02:46
done near JPJ Wangsa maju area (my welders are there) - next to Wei Yip exhaust shop.

The row of workshops ? What the name then ? Maybe i know your welder :lol:

probably yes hahahahaha. They are as famous as Wei Yip tooo *hint*.

The dudes there are all very cool.

 

[thteh86]

i'm quite interested, wan some feed back from the customers too, after u guys do it, pls post here how's the results

 

[EFN]

Originally posted by thteh86@Jan 6 2005, 03:04
i'm quite interested, wan some feed back from the customers too, after u guys do it, pls post here how's the results

No problem, I have done 6 cars so far, comment can be read from here:
Quickshifts

And you can also PM the following members:
- R3l3orN
- 4AGZE
- Shamburke
- Hitz
- Bucho_jr
.........

 

[EFN]

An interested member gave me an idea on how to know if your shifter is mod'dable. just take a picture of what's under the shifter cover and send them to me via email at Erwandy@gmail.com. Easy for everyone

 

[fable_faiz]

ehehhhe.. will mail u tmw bro
;)

 

[protonevo]

Friends, can I install quickshifter only can ah.....

I'm staying in Ampang near ampang point...???

 

[bucho_jr]

Originally posted by EFN+Jan 6 2005, 03:16 -->

QUOTE (EFN @ Jan 6 2005, 03:16 )

--QuoteBegin-thteh86

@Jan 6 2005, 03:04 i'm quite interested, wan some feed back from the customers too, after u guys do it, pls post here how's the results

No problem, I have done 6 cars so far, comment can be read from here: Quickshifts And you can also PM the following members: - R3l3orN - 4AGZE - Shamburke - Hitz - Bucho_jr ......... [/b][/quote] The shifter works PERFECTLY... good custom works.. tarak tipu punya... :D :D :D

 

[hitz]

U all can 've trust n faith on EFN mod work... Done mine n damn satisfied wif the result. :P ;) Keep up the good work man.... :lol: B)

 

[EFN]

Bucho_JR, Hitz THANKS for the comment. It was a pleasure modding the shifters for u guys.

Protonevo, yes when u want to do them? call me for appointment. TQ

NOTE:

I have checked for Perodua Kelisa, it might be very difficult to mod because the shifter base goes through the car body underneath. So need to go under the car to open the shifter hahahaha. But I think it is still possible once the shifter is disassembled. Stay tuned! TQ

 

[fable_faiz]

ahahhaa
okok
gimme an update

 

[narx]

Originally posted by EFN@Jan 8 2005, 08:41
Bucho_JR, Hitz THANKS for the comment. It was a pleasure modding the shifters for u guys.

Protonevo, yes when u want to do them? call me for appointment. TQ

NOTE:

I have checked for Perodua Kelisa, it might be very difficult to mod because the shifter base goes through the car body underneath. So need to go under the car to open the shifter hahahaha. But I think it is still possible once the shifter is disassembled. Stay tuned! TQ

need to tambah or would the price still be the same?

and u`re to cut and join it back rite... would it lead to any problems in the future?

 

[mira_turbo]

bro ! isit possible to get kancil short shift,? my location in perak,, let me know if can
TQ :)

 

[EFN]

Originally posted by narx@Jan 8 2005, 17:50
need to tambah or would the price still be the same?

and u`re to cut and join it back rite... would it lead to any problems in the future?

I have done 6 cars with this cust and weld back method. No complaints so far from the owners. The weld are done by professionals at Exhaust shop not by me. I am the installer and do tuning for the shifters.

If you mean Kelisa, wether to add charges or not really depends on how comlex it is to get the shifter out from the bottom of the car. But if it not soo difficult then no need to pay more. Fair deal?

Thanks all.

 

[dragger]

sorry to ask,what is the advantage of using quickshift? :P
smooth gear shifting? ;)
TQ

 

[7urn57yl3]

Originally posted by dragger@Jan 9 2005, 12:04
sorry to ask,what is the advantage of using quickshift? :P
smooth gear shifting? ;)
TQ

errrr, i think it's self explanatory. "QUICKSHIFT". You can SHIFT, QUICKER.

It shortens the THROW of the SHIFTER so it'll be QUICKER for you to shift from gear to gear. Less time shifting, more time accelarating.

Cool? :)