Opti-Coat™Pro : Vellfire

s1tl

1,000 RPM
Senior Member
Joined
Jul 13, 2010
Messages
1,237
Points
713
Location
Ipoh/KL

This would be the 3rd car this client had us worked on. Toyota Vellfire but brand new! This is what we had always advised our clients to do, "Protection before it too late". Not wasting time further, check out our process.
exterior-surface-prep.jpg

Upon arrival, the car was already looking sleek and shiny.
2016-09-23-11-12-22.jpg

The ODO had only recorded less than 200km, Hence the condition is near mint.

We checked the paint and found some light damages.
2016-09-23-10-55-31.jpg

Some light haziness on the chrome.
2016-09-23-10-55-48.jpg

Some light watermark issues on the chrome as well.
2016-09-23-10-56-08.jpg

and also on the some sections of the paint where water usually flows through.

On the LED spotlight we found some visible swirls.
2016-09-23-11-15-35.jpg

On the LED check light, those swirls became even more obvious.
2016-09-23-11-15-48.jpg

Swirls on a nearby area.

correction.jpg

After some paint correction, the surface is restored.
2016-09-23-12-29-14.jpg

Moving the LED to a nearby region for clearer view.
2016-09-23-12-29-38.jpg

Damage had been fully corrected.

result.jpg

Because the car was already in a rather good condition, no major paint restoration was required. We clean up and correction only damaged parts and applied the Opti-Coat™Pro as a finishing. Check out the unedited finish.


[caption align=alignnone" width=627] sdr[/caption]

 

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience