Opti-Coat™ Pro : Honda City

s1tl

1,000 RPM
Senior Member
Joined
Jul 13, 2010
Messages
1,237
Points
713
Location
Ipoh/KL

Good Morning, we are working on a Honda City again. Although its a common car, but its definitely not to be neglected in terms of protection.
exterior-surface-prep.jpg

Upon arrival, we moved the car to a accessible position for the washing and started with the basic washing.
2015-12-02-11-57-11.jpg

After the wash, we moved on to the paint and surface evaluation and inspection.
2015-12-02-11-57-21.jpg

Being a brand new car, its rather odd to have such amount of tar spot stains.
2015-12-02-11-57-29.jpg

With our portable LED lighting, we inspected the paint condition as well. We spotted some light swirls on the paint.

The sun was out so we took some additional sun shots, indicating the swirl damage on the car.

correction.jpg

First we clayed and removed all tar spots and contamination. The photo shows the tar being dissolved.


The paint correction went well as we removed most of the swirls.

Sun shots on a different panel

Final panel shows some leftover swirls that were too deep to risk.

result.jpg

After much effort, we finally coated the car. Checkout the results.
 

A thread every 60 seconds


Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience
Top Bottom